• Journal of Astronomy and Space Sciences
• /
• v.18 no.1
• /
• pp.71-80
• /
• 2001

The threshold voltage shift observed in TDE (Total Dose Experiment) on board the KITAT-1 is converted into dose (rad($SiO_2$)) using the result of laboratory calibration with Co-60 gamma ray source in KAERI (Korea Atomic Energy Research Institute). Simulation using the NASA radiation model of geomagnetosphere verifies that the dose difference between RADFET1 and RADFET3 observed on KITSAT-1 comes from the difference in shielding thickness at the position of these RADFETs.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.12
• /
• pp.987-995
• /
• 2003

The performance of a residential heating and cooling system with $CO_2$ is predicted by using a cycle simulation model. The simulations are conducted by varying design parameters and operating conditions. The efficiency of the transcritical cycle can be improved by utilizing the advantages in heat transfer characteristics of $CO_2$ and developing microchannel indoor and outdoor heat exchangers. For the designed system of this study, the predicted COP of the heat pump system is approximately 3.5 in the heating mode and 3.0 in the cooling mode. The predicted optimal discharge pressure for the heat pump system is approximately 11 MPa in the heating mode and 9 MPa in the cooling mode.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.159-165
• /
• 2007

This paper presents a method for the derivation of model parameters of a co-generation system using data measured through on-site generator characteristic testing and validates its model parameters. Dynamic models such as generator, excitation system, and turbine/governor are mainly dealt in this paper. For the purpose of validation of derived model parameters, the measured results are compared with simulation results. The comparisons between measured results and simulation results show good match.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.960-962
• /
• 2017

This thesis suggests method that How sound sources used to simulation that can be used to military training and education divide each frequency and each bandwidth filtering method. method for frequency dividing and denoising are suggested into Wavelet analysis. And We materialize authoring tool about filtering that design for wavelet job.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.601-602
• /
• 2002

Numerical simulation using well-known commercial software Fine/Turbo is applied to the analysis of the aerodynamic performance for the supersonic turbine system with partial admission nozzle. Calculation was performed for coupled system of nozzle and blades using mixing plane method. In addition, calculations were also performed for the blades alone to investigate the effect of the performance variation with blade profile. These computational results are compared with the experiments. The agreement between the prediction and the experiment was found to be satisfactory..

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.5
• /
• pp.510-513
• /
• 1997

This study examined the effects of ignoring inbreeding depression on (co)variance components for weaning weight through the use of Monte Carlo simulation. Weaning weight is of particular interest as a trait for which additive direct and maternal genetic components exist and there then is the potential for a direct-maternal genetic covariance. Ignoring inbreeding depression in the analytical model (.8 kg reduction of phenotypic value per 1% inbreeding) led to biased estimates of all genetic (co) variance components, all estimates being larger than the true values of the parameters. In particular, a negative bias in the direct-maternal genetic covariance was observed in analyses that ignored inbreeding depression. A small spurious sire-by-year interaction variance was also observed.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.342-344
• /
• 2006

전동기 구동시스템의 사양 결정과 설계를 위해서는 부하의 부하토크, 관성계수, 마찰계수 등의 정보에 의한 부하 모델링이 반드시 필요하다. 전동지게차 시스템의 모델링을 위해서는 차체의 중량과, 바퀴의 제원 등 제한적인 정보를 기초로 하여 번거로운 계산과정을 거쳐야 하지만 정확한 정보를 얻기에는 어려움이 따른다. RecurDyn은 기계시스템의 모델링과 시뮬레이션을 하는 3차원 해석이 가능한 Functionbay사에서 개발한 시뮬레이션 프로그램으로서 3D의 기계적인 형상을 작성하고, 물성을 입력하면 부하토크, 등가 관성계수, 마찰계수를 출력할 수 있어 전동기구동시스템의 시뮬레이션 프로그램인 Matlab/Simulink와 결합하여 시뮬레이션을 수행 할 경우 부하 모델링 없이 전체 구동시스템의 특성 시뮬레이션이 가능하다. 본 논문에서는 영구자석 동기전동기로 구동하는 전동지게차 시스템을 대상으로 RecurDyn 프로그램의 활용을 소개하고 Matlab/Simulink를 이용한 결함 시뮬레이션의 가능성을 보고자 한다.

• Journal of the Korean Society of Combustion
• /
• v.22 no.3
• /
• pp.8-16
• /
• 2017

MILD combustion was first developed to suppress thermal NOx formation in combustor for heating industrial furnaces. In this paper, the effect of co-flow MILD combustor geometry and operating conditions on the formation of MILD combustion was analyzed using 3 dimensional numerical simulation. The numerical simulations were carried out using ANSYS Fluent. The combustion and turbulence flow was modeled using the Eddy Dissipation Concept(EDC) model and realizable $k-{\varepsilon}$ model respectively. The results show that the high temperature region and average temperature decreased due to an increase in the air velocity and decrease the wall thickness of fuel nozzle. In particular, the MILD combustion flame was found to be stable with a combustion flame region at fuel velocity 10 m/s, air velocity 20 m/s, fuel nozzle thickness 1.0 mm, equivalence ratio 0.9, and outlet area ratio 40%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4469-4482
• /
• 2015

In this paper, we investigate the outage performance of a two-way decode-and-forward relaying network in an interference-limited Nakagami-m fading environment. More specifically, assuming the presence of Nakagami-m faded multiple co-channel interferers at the source/destination terminals, the closed-form approximate expression for the outage probability is derived by using moment-based estimators attaining the appropriate Nakagami-m fading parameter. Simulation results demonstrate that our analytical result is in excellent agreement with the Monte Carlo simulation.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.27-33
• /
• 2011

HCPV(High Concentrated PV) systems have well known for CPV market all over the world. Low concentration type silicon based modules have been introduced in the market. But low cost of standard flat silicon modules made them useless nowadays. High cost of compound semiconductor solar cell reduced cost effective cpv module production than that of recently silicon solar cell. In order to overcome increasing cost of CPV module, we study middle concentration type fresnel lens simulation using concentrated type silicon based solar cell. Linear type fresnel lens made production of CPV module without secondary optics such as light pipe or light tunnel. This type of fresnel lens design makes more cost effective solution for cpv niche market.