• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.65-67
• /
• 2008

Kyoto Protocol against global warming came into effect in Feb 2005. This paper presents a calculation $CO_2$ emission of D power plant for combusting LNG and heavy oil using the a, b, c coefficients obtained by the performance test. The authors also calculate the breakeven point of the fuel transfer from LNG to Oil considering recent $CO_2$ emission cost.

• Journal of the Korean Society for information Management
• /
• v.25 no.1
• /
• pp.173-190
• /
• 2008

Author co-citation analysis(ACA) technique has been widely used for identifying research areas and trends in a discipline. But this technique has some limitations, mainly due to citation delay, on analyzing current trends and identifying active researchers. In this study, a new method, named as Bibliographic Author Coupling Analysis (BACA), is suggested for overcoming those limitations of author co-citation analysis. BACA is based on Kessler's bibliographic coupling approach and focuses not on documents but on authors. Simply stated, BACA technique assumes that those likewise citing authors have the same research interests. For the purpose of comparing with author co-citation analysis, two preceding studies with author co-citation analysis are reconsidered and re-examined using BACA. The comparing results can be regarded as promising the usefulness of BACA in analyzing current research trends and identifying active researchers.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.199-209
• /
• 2017

This study was carried out to confirm a convergent research pattern and researchers' role in stem cell sector by social network analysis. Articles were extracted from 1996 to 2012 in PubMed, 515 authors of 270 embryonic stem cell and induced pluripotent stem cell articles and 1,515 authors of 580 adult stem cell and mesenchymal stem cell articles. Degree(D) and betweenness(B) centrality was measured and co-author network was generated for researcher's role. As a result, Core researcher and Intermediary researcher was identified in co-author network. Core researcher had high D. centrality, otherwise high B. centrality or not. Intermediary researcher for convergent research had high B. centrality and low D. centrality. Conclusively, co-author network will be used as objective data not only to find core researchers in subject area for improving achievement but also to select experts for research project evaluation.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.4
• /
• pp.53-63
• /
• 2023

The utilization of department information in bibliometric analysis using scientific and technological literature is highly advantageous. In this paper, the department information dataset was built through the screening, data refinement, and classification processing of authors' department type belonging to university institutions appearing in academic journals in the field of science and technology published in Korea, and the automatic classification model based on deep learning was developed using the department information dataset as learning data and verification data. In addition, we analyzed the co-authorship structure and network in the field of computer science using the department information dataset and affiliation information of authors from domestic academic journals. The research resulted in a 98.6% accuracy rate for the automatic classification model using Korean department information. Moreover, the co-authorship patterns of Korean researchers in the computer science and engineering field, along with the characteristics and centralities of the co-author network based on institution type, region, institution, and department type, were identified in detail and visually presented on a map.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.145-148
• /
• 2007

The authors report on the fabrication of thin film transistors (TFTs) that use amorphous indium-gallium-zinc oxide (a-IGZO) channel and have the channel length (L) and width (W) patterned by dry etching. To prevent the plasma damage of active channel, a 100-nm-thckness $SiO_{x}$ by PECVD was adopted as an etch-stopper structure. IGZO TFT (W/L=10/50${\mu}m$) fabricated on glass exhibited the high performance mobility of $35.8\;cm^2/Vs$, a subthreshold gate voltage swing of $0.59V/dec$, and $I_{on/off}$ of $4.9{\times}10^6$. In addition, 4.1” transparent QCIF active-matrix organic light-emitting diode display were successfully fabricated, which was driven by a-IGZO TFTs.

• Tribology and Lubricants
• /
• v.19 no.3
• /
• pp.151-158
• /
• 2003

In metal cutting at the tool-chip interface, friction generates considerable amount of heat. Thus, the knowledge of wear properties of cutting tool material in high temperature has been as one of important factors in need of clarification. The authors presented the wear properties of 5%Co-5%V-1%Nb high speed steel, fabricated by powder metallurgy, in room temperature in previous articles. The objective of this paper is to clarify the effects of temperature on its wear properties. Wear tests in sliding conditions under various temperatures have been conducted using the pin-on-disc type wear test machine. The results indicate that the wear properties of 5%Co-5%V-1%Nb high speed steel in high temperature as well as in room temperature are excellent. It may be deduced that the oxide layer formed on worn surface at high temperature is stable enough to prevent wear due to the high temperature strength of its matrix.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.288-291
• /
• 2006

The authors, R&D member of DAWONSYS and Soongsil University, are developing 5000kW smelting inverter system by 2007 under the sponsor from Korea Energy Management Corporation. As a part of the project, 2500kW inverter system has developed in 2005[6], and installed in real production site, and has been running for 7 months successfully. This report deals with the test result of 2500kW smelting inverter system and design for 5000kW smelting inverter system which is final target of this project.

• The Journal of Korean Medicine
• /
• v.20 no.1 s.37
• /
• pp.30-43
• /
• 1999

This is a fundamental study for bibliometric analysis investigating the general, research, copyright activities and cited literature related to the field of Oriental Medicine, The data used for this study included theses published by the Journal of Korean Oriental Medicine Society over a period of nine years, from 1990 to 1998, We investigated the productivity of national authors, distribution of cited literature and subject analysis about Oriental Medicine and its authors quantitatively, So we were able to reach several conclusions: 1. The rule of Lotka is applied considerably to analyze the productivity of authors in the field of Oriental Medicine, When it comes to the analysis of national authors it was found that most authors in this field of study published 2 to 10 volumes, likewise other studies. And the rate of co-authorships was high, because most surveys are clinical. 2. When it comes to distribution of cited literatures, independent volumes were cited more than journals. This represents that the citing style of Oriental Medicine has a tendency to follow the methodology of historical research. 3. Scholars in the field of Oriental Medicine mainly tend to cite self-subjects among cited literatures. After analysing self-subjects in this field, the result is that the order of frequency used as cited literatures is as follows: Internal Medicine, Herbology and Oriental Prescription, Acupuncture & Moxibustion. Acupuncture point, and subjects with the circulatory system diseases were mainly cited as far as subordinary subjects of Internal Medicine.

• Journal of Magnetics
• /
• v.13 no.4
• /
• pp.115-119
• /
• 2008

The authors predicted that $Co_2HfSi$, a $Co_2$-based full Heusler alloy, is being a half-metallic ferromagnet by first-principles calculations using the all electron full-potential linearized augmented plane wave method which adopts the generalized gradient approximation. The integer value of the calculated total magnetic moment of 2.00 ${\mu}_B$ per formula unit and a spin gap of 0.69 eV in spin down state confirmed the half-metallicity of bulk $Co_2HfSi$. For the $Co_2HfSi$(001) surface, we considered two possible surface terminations, namely, Co terminated and HfSi terminated surfaces. It was found that half-metallicity was retained at the HfSi-terminated surface but not at the Co-terminated surface. The magnetic moment of surface Co atoms in the Co-terminated surface was slightly lower than that of Co atoms in deep inner-layers, whereas the magnetic moments of Hf and Si atoms at the HfSi-terminated surface were almost same as those in deep inner-layers.

• Journal of The Korean Society of Integrative Medicine
• /
• v.12 no.2
• /
• pp.197-210
• /
• 2024

Purpose : This study aimed to analyze research trends in the field of integrative medicine through a bibliometric analysis of articles published in Integrative Medicine Research (IMR) journal from 2017 to 2022. Methods : Articles published in IMR journal between 2017 and 2022 were searched using the Web of Science database on August 22, 2023. The analysis was performed using the Bibliometrix and Biblioshiny tools in R (version 4.3.1) and VOSviewer (version 1.6.19). Results : The key findings were as follows: average citations per article (9.41), total authors (1,142), single-authored articles (12), average articles per author (0.27), average co-authors per article (5.27), and rate of international co-authorships (15.69 %). The most-cited article was on the cryopreservation of cells or tissues and their clinical applications. The top keyword analysis by author keywords showed that "acupuncture" was the most frequently used keyword (33 times). Co-occurrence network analysis showed 85 high-frequency keywords that appeared five or more times, and the top five keywords by total link strength were "acupuncture," "herbal medicine," "prevalence," "alternative medicine," and "complementary." The study found that, contrary to the trend in complementary and alternative medicine research in Korea, the IMR journal actively conducts intervention studies to provide clinical evidence. Conclusion : In the IMR journal, "acupuncture" was the most frequent of author keywords. The analysis of keyword trend topics over time showed that the keyword "systematic review" continued to appear from 2020 to 2022, and the keyword "clinical practice guideline" appeared for the first time in 2021. In particular, the co-occurrence network analysis highlighted keywords related to intervention research, in contrast to domestic research trends. While this study analyzed only one journal, future studies expanding the category of integrative medicine and increasing the number of journals analyzed may provide further insights.