• Korean Journal of Ecology and Environment
• /
• v.52 no.2
• /
• pp.105-117
• /
• 2019

In order to investigate the characteristics of benthic macroinvertebrate communities in the Gihwa stream, a tributary of the Dong River, we surveyed the community and environmental factors in April and November 2013 at 6 sites. The benthic macroinvertebrate taxa represented total 63 species belonging to 29 families, 12 orders, 5 classes and 4 phyla. Total 48 (10~28 in each site) species were collected in April and 44 (13~24 in each site) in November. The number of individuals increased slightly from $560{\sim}2,290m^{-2}$ in April to $806{\sim}3,674m^{-2}$ in November. Chironomidae spp. was dominant species in April and Stenopsyche bergeri was dominant species in November. In the Functional Feeding Groups, Gathering-collector(53.9%) was dominant in April, while Filtering-collector (44.3%) increased in November. Intolerant order category (i.e. EPT species richness) in St.1, St.5 and St.6 increased in November compared to April due to the increase of Trichoptera. St.2, St.3 and St.4, which were located near the fish farm, were low EPT as a whole, but Benthic macroinvertebrate index (BMI) was good state in November than April due to decrease of Chironomidae spp.. The environmental factors in the survey site showed similar tendency except for St.1 between both seasons, and electrical conductivity, salinity, and water width showed seasonal differences. Cluster analysis and Nonmetric multidimensional scaling (NMDS) based on benthic macroinvertebrate community data were divided into two groups according to season. Electrical conductivity, salinity and substrate composition were the most influential factors determining the distribution patterns of macroinvertebrate communities.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.10
• /
• pp.261-268
• /
• 2021

Cloud computing is a computing paradigm in which users can utilize computing resources in a pay-as-you-go manner. In a cloud system, resources can be dynamically scaled up and down to the user's on-demand so that the total cost of ownership can be reduced. The Modeling and Simulation (M&S) technology is a renowned simulation-based method to obtain engineering analysis and results through CAE software without actual experimental action. In general, M&S technology is utilized in Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), Multibody dynamics (MBD), and optimization fields. The work procedure through M&S is divided into pre-processing, analysis, and post-processing steps. The pre/post-processing are GPU-intensive job that consists of 3D modeling jobs via CAE software, whereas analysis is CPU or GPU intensive. Because a general-purpose desktop needs plenty of time to analyze complicated 3D models, CAE software requires a high-end CPU and GPU-based workstation that can work fluently. In other words, for executing M&S, it is absolutely required to utilize high-performance computing resources. To mitigate the cost issue from equipping such tremendous computing resources, we propose HEMOS-Cloud service, an integrated cloud and cluster computing environment. The HEMOS-Cloud service provides CAE software and computing resources to users who want to experience M&S in business sectors or academics. In this paper, the economic ripple effect of HEMOS-Cloud service was analyzed by using industry-related analysis. The estimated results of using the experts-guided coefficients are the production inducement effect of KRW 7.4 billion, the value-added effect of KRW 4.1 billion, and the employment-inducing effect of 50 persons per KRW 1 billion.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.4
• /
• pp.64-73
• /
• 2021

The purpose of this study is to present a method to assess the landscape aesthetic value of Bukhansan National Park using geotagged images that have been shared on social media sites. The method presented in this study consisted mainly of collecting geotagged image data, identifying landscape images, and analyzing the cumulative visibility by applying a target probability index. Ramblr is an application that supports outdoor activities with many users in Korea, from which a total of 110,954 geotagged images for Bukhansan National Park were collected and used to assess the landscape aesthetics. The collected geotagged images were interpreted using the Google Vision API, and were subsequently were divided into 11 landscape image types and 9 non-landscape image types through cluster analysis. As a result of analyzing the landscape types of Bukhansan National Park based on the extracted landscape images, landscape types related to topographical characteristics, such as peaks and mountain ranges, accounted for the largest portion, and forest landscapes, foliage landscapes, and waterscapes were also commonly found as major landscape types. In the derived landscape aesthetic value map, the higher the elevation and slope, the higher the overall landscape aesthetic value, according to the proportion and characteristics of these major landscape types. However, high landscape aesthetic values were also confirmed in some areas of lowlands with gentle slopes. In addition, the Bukhansan area was evaluated to have higher landscape aesthetics than the Dobongsan area. Despite the high elevation and slope, the Dobongsan area had a relatively low landscape aesthetic value. This shows that the aesthetic value of the landscape is strongly related not only to the physical environment but also to the recreational activities of visitors who are viewing the scenery. In this way, the landscape aesthetics assessment using the cumulative visibility of geotagged images is expected to be useful for planning and managing the landscape of Bukhansan National Park in the future, through allowing the geographical understanding of the landscape values based on people's perceptions and the identification of the regional deviations.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.407-426
• /
• 2020

The purpose of this study was to make convergent and combined analysis of the sport industry and exercise rehabilitation in the era of New Normal based on the Fourth Industrial Revolution and devise a comprehensive plan for future activation. For this purpose, literature review was performed mainly by analyzing the environment of the sport industry in the New Normal era based on the Fourth Industrial Revolution and by carrying out convergent and combined analysis of the sport industry to present a convergent and combined activation plan for exercise rehabilitation comprehensively as follows: First, it is necessary to make a strategy of promoting exercise rehabilitation in convergent and combined ways at the sport industry level. This means development of a convergent and combined exercise rehabilitation-tourism-ICT model as well as a convergent and combined exercise rehabilitation-ICT model through collaboration among ministries, including those of health and sports. Second, it is necessary to convert into a convergent and combined way of thinking and extend and reinforce educational competitiveness in the area of exercise rehabilitation. That is, it is necessary to refine the education and training systems for reinforcing personal ICT competence of exercise rehabilitation majors and relevant ones and provide convergent and combined business commencement education. Third, it is necessary to make different types of research and development by applying practical, convergent and combined skills based on the industrial field to exercise rehabilitation and relevant areas. Efforts should be made to overcome any risk in the era of New Normal and support business commencement with convergent and combined skills for exercise rehabilitation. Fourth, it is necessary to make mid- and long-term clusters where exercise rehabilitation and relevant businesses can be accumulated. This means building an industrial hub and complex for exercise rehabilitation and requires making an R&D-based cluster with industrial-academic-governmental collaboration, maximizing the synergy effects with local infrastructures, and fulfilling the function of realizing a spontaneous profit-generating structure.

• Korean Journal of Ichthyology
• /
• v.33 no.4
• /
• pp.226-239
• /
• 2021

Sebastes minor, Sebastes trivittatus, Sebastes owstoni, and Sebastes steindachneri are indigenous fish species inhabiting the central part of the East Sea, Korea. In order to understand the molecular evolution of these four rockfishes, we sequenced the complete mitochondrial genomes (mitogenomes) of S. minor and S. trivittatus. To further analyze the phylogeny of Sebastes species, the mitogenomes of 16 rockfishes were comparatively investigated. The complete mitochondrial DNA (mtDNA) nucleotide sequences of S. minor and S. trivittatus were 16,408 bp and 16,409 bp in length, respectively. A total of 37 genes were found in mtDNA of S. minor and S. trivittatus, including 13 protein-coding genes, 2 ribosomal RNA genes, and 22 transfer RNA genes, which exhibited similar characters with other Sebastes species in the East Sea, Korea. In addition, we detected a conserved motif "ATGTA" in the control region of the four Sebastes species, but no tandem repeat units. Comparative analyses of the congeneric mitochondrial genomes were performed, which showed that control regions were more variable than the concatenated protein-coding genes. As a result of analysing phylogenetic relationships of four Sebastes species by using concatenated nucleotide sequences of 13 protein-coding genes, S. minor, S. trivittatus, S. owstoni and S. steindachneri were clustered into three clades. The phylogenetic tree exhibited that S. minor and S. steindachneri shared a closer relationship, whereas S. trivittatus and S. vulpes formed another distinct clade. Our results contribute to a better understanding of evolutionary patterns of Sebastes species inhabiting the middle East Sea, Korea.

• Journal of Marine Life Science
• /
• v.8 no.1
• /
• pp.8-31
• /
• 2023

To understand the distribution and formation mechanism of benthic foraminiferal assemblages, grain size analysis, ¹⁴C radiocarbon dating, and benthic foraminifera analysis were conducted on thirty-two surface sediments collected from the continental shelf of the northern East China Sea, respectively. Surface sediment was composed of sandy mud~muddy sand facies with an average of 52.04% of sand, 13.72% of silt, and 34.20% of clay. These sedimentary facies are palimpsest sediment. Benthic foraminifera was classified into a total of 48 genera and 104 species, including agglutinated foraminifera, calcareous-hyaline, and calcareous-porcelaneous foraminifera. The production rate of agglutinated foraminifera increased toward the Yangtze River area while that of planktonic foraminifera increased toward Jeju Island. Dominant species are Ammonia ketienziensis, Bolivina robusta, Eggella advena, Eilohedra nipponica, Pseudorotalia gamardii, Pseudoparrella naraensis. ¹⁴C radiocarbon datings of Bolivina robusta and Pseudorotalia gamardii with the highest production rate were 2,360±40 yr B.P. and 2,450±40 yr B.P., respectively. In the result of cluster analysis, three assemblages composed of P. gaimardii, B. robusta, and A. ketienziensis-P. naraensis were classified broadly. P. gaimardii assemblage is thought to be formed from about 2.5 yr B.P. at the sea area of the Yangtze River to 50 m in water depth affected by fresh water. B. robusta assemblage is thought to be formed from about 2.4 yr B.P. at the sea area of Jeju Island to 50~100 m affected by offshore water. And then, A. ketienziensisP. naraensis assemblage was formed in the northwest sea area (Central Yellow Sea Mud). These distributions and composition of benthic foraminiferal assemblages formed from about 2.5 yr B.P. in the northern East China Sea are thought to be due to the change of benthic ecology environment that occurred by the sea level increase during the late Holocene.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.1
• /
• pp.9-23
• /
• 2007

To investigate the degree of pollution using the species composition of benthic community and environments, the present study was conducted in Jinhae Bay, May of 1998. In Jinhae Bay, benthic macrofaunal community was investigated on the base of the samples from 67 stations. The main facies of the surface sediment was silty clay and clay. The total species number and the mean density of macrobenthic animals were 255 species and 984 $ind./m^2$, respectively. There were 90 species and 773 $ind./m^2$ of polychaetes as the most major faunal group in Jinhae Bay. At the region between the eastern mouth of Jinhae Bay and Gadeok Is., the species number and density were higher, while lower at the western area of Jinhae Bay. The most dominant benthic macrofauna in Jinhae Bay was the polychaetes, Lumbrineris longifolia(16.9%), and followed by polychaetes Tharyx sp.(6.7%), Clone teres(4.7%), Glycinde sp.(4.2%), bivalves Theora fragilis(4.0%), crustaceans Corophium sp.(4.0%) and so on. The most of the predominant species appeared mainly on the region between the eastern mouth of Jinhae Bay and Gadeok Is. Cluster analysis based on the macrobenthic faunal composition showed that Jinhae Bay could be divided into three station groups: The western Jinhae Bay(Station group A), the mouth of Jinhae Bay(Station groupe B), and offshore area between Gadeok Is. and Geoje Is.(Station group C). The mouth of Jinhae Bay had the highest mean species number and the mean density, and its important species was Lumbrineris longifolia. The offshore area between Gadeok Is. and Geoje Is. had medium mean species number and the mean density. The western Jinhae Bay had the lowest mean species number and the mean density. The distribution of BPI and BC values, used to assess benthic pollution, showed similar patterns. According to the classification proposed by Borja et al.(2000), the stations of the western inner-bay were heavily polluted sites, the stations between mouth of the bay and the offshore area were slightly polluted sites, and the stations of the other area were meanly polluted sites. Benthic community healthiness of the western Jinhae Bay was classified to 'Transitional to pollution' by BC values. The degree of pollution in Jinhae Bay may have extended gradually from the western Jinhae Bay to the mouth of the bay.

• The Korean Journal of Air & Space Law and Policy
• /
• v.25 no.1
• /
• pp.97-158
• /
• 2010

The purpose of this paper is to research on the contents and improvement of national legislations relating to space development in Korea to make the sustainable progress of space development project in Korea. Korea has launched its first satellite KITST-1 in 1992. The National Space Committee has established "The Space Development Promotion Basic Plan" in 2007. The plan addressed the development of total 13 satellites by 2010 and the space launch vehicle by 2020, and the launch of moon exploration spaceship by 2021. Korea has built the space center at Oinarodo, Goheng Province in June 2009. In Korea the first small launch vehicle KSLV-1 was launched at the Naro Space Center in August 2009, and its second launch was made in June 2010. The United Nations has adopted five treaties relating to the development of outer space as follows : The Outer Space Treaty of 1967, the Rescue and Return Agreement of 1968, the Liability Convention of 1972, the Registration Convention of 1974, and the Moon Treaty of 1979. All five treaties has come into force. Korea has ratified the Outer Space Treaty, the Rescue and Return Agreement, the Liability Convention and the Registration Convention excepting the Moon Treaty. Most of development countries have enacted the national legislation relating to the development of our space as follows : The National Aeronautic and Space Act of 1958 and the Commercial Space Act of 1998 in the United States, Outer Space Act of 1986 in England, Establishment Act of National Space Center of 1961 in France, Canadian Space Agency Act of 1990 in Canada, Space Basic Act of 2008 in Japan, and Law on Space Activity of 1993 in Russia. There are currently three national legislations relating to space development in Korea as follows : Aerospace Industry Development Promotion Act of 1987, Outer Space Development Promotion Act of 2005, Outer Space Damage Compensation Act of 2008. The Ministry of Knowledge Economy of Korea has announced the Full Amendment Draft of Aerospace Industry Development Promotion Act in December 2009, and it's main contents are as follows : (1) Changing the title of Act into Aerospace Industry Promotion Act, (2) Newly regulating the definition of air flight test place, etc., (3) Establishment of aerospace industry basic plan, establishment of aerospace industry committee, (4) Project for promoting aerospace industry, (5) Exploration development, international joint development, (6) Cooperative research development, (7) Mutual benefit project, (8) Project for furthering basis of aerospace industry, (9) Activating cluster of aerospace industry, (10) Designation of air flight test place, etc., (11) Abolishing the designation and assistance of specific enterprise, (12) Abolishing the inspection of performance and quality. The Outer Space Development Promotion Act should be revised with regard to the following matters : (1) Overlapping problem in legal system between the Outer Space Development Promotion Act and the Aerospace industry Development promotion Act, (2) Distribution and adjustment problem of the national research development budget for space development between National Space Committee and National Science Technology Committee, (3) Consideration and preservation of environment in space development, (4) Taking the legal action and maintaining the legal system for policy and regulation relating to space development. The Outer Space Damage Compensation Act should be revised with regard to the following matters : (1) Definition of space damage and indirect damage, (2) Currency unit of limit of compensation liability, (3) Joint liability and compensation claim right of launching person of space object, (4) Establishment of Space Damage Compensation Council. In Korea, it will be possible to make a space tourism in 2013, and it is planned to introduce and operate a manned spaceship in 2013. Therefore, it is necessary to develop the policy relating to the promotion of commercial space transportation industry. Also it is necessary to make the proper maintenance of the current Aviation Law and space development-related laws and regulations for the promotion of space transportation industry in Korea.

• Journal of Intelligence and Information Systems
• /
• v.18 no.1
• /
• pp.1-21
• /
• 2012

In recent years, mobile phone has experienced an extremely fast evolution. It is equipped with high-quality color displays, high resolution cameras, and real-time accelerated 3D graphics. In addition, some other features are includes GPS sensor and Digital Compass, etc. This evolution advent significantly helps the application developers to use the power of smart-phones, to create a rich environment that offers a wide range of services and exciting possibilities. To date mobile AR in outdoor research there are many popular location-based AR services, such Layar and Wikitude. These systems have big limitation the AR contents hardly overlaid on the real target. Another research is context-based AR services using image recognition and tracking. The AR contents are precisely overlaid on the real target. But the real-time performance is restricted by the retrieval time and hardly implement in large scale area. In our work, we exploit to combine advantages of location-based AR with context-based AR. The system can easily find out surrounding landmarks first and then do the recognition and tracking with them. The proposed system mainly consists of two major parts-landmark browsing module and annotation module. In landmark browsing module, user can view an augmented virtual information (information media), such as text, picture and video on their smart-phone viewfinder, when they pointing out their smart-phone to a certain building or landmark. For this, landmark recognition technique is applied in this work. SURF point-based features are used in the matching process due to their robustness. To ensure the image retrieval and matching processes is fast enough for real time tracking, we exploit the contextual device (GPS and digital compass) information. This is necessary to select the nearest and pointed orientation landmarks from the database. The queried image is only matched with this selected data. Therefore, the speed for matching will be significantly increased. Secondly is the annotation module. Instead of viewing only the augmented information media, user can create virtual annotation based on linked data. Having to know a full knowledge about the landmark, are not necessary required. They can simply look for the appropriate topic by searching it with a keyword in linked data. With this, it helps the system to find out target URI in order to generate correct AR contents. On the other hand, in order to recognize target landmarks, images of selected building or landmark are captured from different angle and distance. This procedure looks like a similar processing of building a connection between the real building and the virtual information existed in the Linked Open Data. In our experiments, search range in the database is reduced by clustering images into groups according to their coordinates. A Grid-base clustering method and user location information are used to restrict the retrieval range. Comparing the existed research using cluster and GPS information the retrieval time is around 70~80ms. Experiment results show our approach the retrieval time reduces to around 18~20ms in average. Therefore the totally processing time is reduced from 490~540ms to 438~480ms. The performance improvement will be more obvious when the database growing. It demonstrates the proposed system is efficient and robust in many cases.

• Journal of Intelligence and Information Systems
• /
• v.25 no.4
• /
• pp.1-33
• /
• 2019

The small and medium sized enterprises (hereinafter SMEs) are already at a competitive disadvantaged when compared to large companies with more abundant resources. Manufacturing SMEs not only need a lot of information needed for new product development for sustainable growth and survival, but also seek networking to overcome the limitations of resources, but they are faced with limitations due to their size limitations. In a new era in which connectivity increases the complexity and uncertainty of the business environment, SMEs are increasingly urged to find information and solve networking problems. In order to solve these problems, the government funded research institutes plays an important role and duty to solve the information asymmetry problem of SMEs. The purpose of this study is to identify the differentiating characteristics of SMEs that utilize the public information support infrastructure provided by SMEs to enhance the innovation capacity of SMEs, and how they contribute to corporate performance. We argue that we need an infrastructure for providing information support to SMEs as part of this effort to strengthen of the role of government funded institutions; in this study, we specifically identify the target of such a policy and furthermore empirically demonstrate the effects of such policy-based efforts. Our goal is to help establish the strategies for building the information supporting infrastructure. To achieve this purpose, we first classified the characteristics of SMEs that have been found to utilize the information supporting infrastructure provided by government funded institutions. This allows us to verify whether selection bias appears in the analyzed group, which helps us clarify the interpretative limits of our study results. Next, we performed mediator and moderator effect analysis for multiple variables to analyze the process through which the use of information supporting infrastructure led to an improvement in external networking capabilities and resulted in enhancing product competitiveness. This analysis helps identify the key factors we should focus on when offering indirect support to SMEs through the information supporting infrastructure, which in turn helps us more efficiently manage research related to SME supporting policies implemented by government funded institutions. The results of this study showed the following. First, SMEs that used the information supporting infrastructure were found to have a significant difference in size in comparison to domestic R&D SMEs, but on the other hand, there was no significant difference in the cluster analysis that considered various variables. Based on these findings, we confirmed that SMEs that use the information supporting infrastructure are superior in size, and had a relatively higher distribution of companies that transact to a greater degree with large companies, when compared to the SMEs composing the general group of SMEs. Also, we found that companies that already receive support from the information infrastructure have a high concentration of companies that need collaboration with government funded institution. Secondly, among the SMEs that use the information supporting infrastructure, we found that increasing external networking capabilities contributed to enhancing product competitiveness, and while this was no the effect of direct assistance, we also found that indirect contributions were made by increasing the open marketing capabilities: in other words, this was the result of an indirect-only mediator effect. Also, the number of times the company received additional support in this process through mentoring related to information utilization was found to have a mediated moderator effect on improving external networking capabilities and in turn strengthening product competitiveness. The results of this study provide several insights that will help establish policies. KISTI's information support infrastructure may lead to the conclusion that marketing is already well underway, but it intentionally supports groups that enable to achieve good performance. As a result, the government should provide clear priorities whether to support the companies in the underdevelopment or to aid better performance. Through our research, we have identified how public information infrastructure contributes to product competitiveness. Here, we can draw some policy implications. First, the public information support infrastructure should have the capability to enhance the ability to interact with or to find the expert that provides required information. Second, if the utilization of public information support (online) infrastructure is effective, it is not necessary to continuously provide informational mentoring, which is a parallel offline support. Rather, offline support such as mentoring should be used as an appropriate device for abnormal symptom monitoring. Third, it is required that SMEs should improve their ability to utilize, because the effect of enhancing networking capacity through public information support infrastructure and enhancing product competitiveness through such infrastructure appears in most types of companies rather than in specific SMEs.