• 한국의류학회지
• /
• 제33권7호
• /
• pp.1109-1120
• /
• 2009

This study develops a fitted torso type basic pattern for men by utilizing 3D body scan data. Recent fashion trends are reflected in the development of the pattern. The subjects were 15 men in their 20's, who wear size 95 (M size). Body scan data was obtained through a 3D whole body scanner (WB4, Cyberware, USA), and a body surface development figure for developing male fitted torso type basic pattern was attained through the use of Rapid Form 2006 as well as Auto CAD 2006 programs. The results are as follows: A body surface development figure through body surface segment method showed high exactitude in an error range of 100$\pm$1%. In addition, it occurred in an error range of 100:1:3% because of the hard scanning conditions in the incline of the shoulder and armpit areas. However, the body surface development figure as well as the direct measurement results can be used as basic data for the given patternmaking since the error range falls into 100$\pm$3%. Dart amounts obtained from the average cross section were center back 2.2cm (24.3%), back armpit point 3.8cm (41.8%), front armpit point 3.0cm (33.9%). As shown the jacket pattern, the biggest dart amount was portioned out at the back armpit point. The drafting equations for the development pattern acquired are as follows; Full width=C/2+5cm, back length=height/4-1cm, armhole depth=(C/10+12cm)+3cm, back width=2C/10+2cm, front width=2C/10. The development pattern was a fitted torso basic pattern that was composed of 3 pieces, so it would be very useful in developing shirt or jacket patterns. According to the results of the evaluation of the developed pattern appearance, it obtained higher scores of over 3.5 points in almost items, meaning that the developed pattern is appropriate for a male fitted torso type basic pattern. It suggests a possibility of patternmaking from a body surface development figure in 2-D to prototype.

• 복식
• /
• 제61권4호
• /
• pp.117-137
• /
• 2011

This study analyzed historical records on silk tabby-ju(細), Si(總)- in a diachronic and spatial point of view. The historical records were written in Samguksagi(三國史記) of Korea, Eastern barbarian[東弟] section of Ershiwush(二十五史) of China and Ritkokusi(六國史)of Japan from the $4^{th}$ century to the early $10^{th}$ century. The study finally could reach the conclusions as follow. Firstly, records that fabrics like Ju were used were found in the Korean historical documents written on Balhae(渤海) of the $8^{th}$ century and Sllla(新羅) of the $9^{th}$ century. On the other hand, no official record on production of fabrics like Ju was found in the Japanese historical documents up to the $10^{th}$ century. Instead, there are some records that Si was produced and used for the first time in the $7^{th}$ century and it was rapidly spread in the $8^{th}$ century. In the $9^{th}$ century, the number of records on Si was sharply decreased and the importance of Si in the foreign-relation point of view also went down gradually. Secondly, records on using and trading with both Ju(細) and Si(總)in the foreign relation of two countries were shown from the $8^{th}$ century to the $9^{th}$ century. In the period, international exchange had been promoted among Balhae, Silla and ancient Japan. In the $9^{th}$ century, fabrics like Ju of ancient Korea was introduced to ancient Japan ancient Japanese people could not manufacture Ju by themselves at that time. On this account, we assumed that ancient Japanese people might consider Ju as high quality fabric rather than Si that had been used as general fabric. Meanwhile, it is found that Japan presented various kinds of Si to Balhae and Silla from the early $8^{th}$ century. As the foreign relation between Sllia and ancient Japan got weaker in the mid-$8^{th}$ century, frequency and amount of supplying Si to Balhae were relatively increased. Besides Si, Balhae was given a lot of silk yarn and floss. These fabrics presumably were used as raw material of Ju in Balhae because Balhae got low output of silk due to its geographical condition.

• 한국의류산업학회지
• /
• 제1권3호
• /
• pp.252-258
• /
• 1999

미혼여성과 기혼여성을 대상으로 인체계측을 실시하여 직접 계측치와 지수치를 이용하여 주축요인분석을 한 결과 도출된 인자를 독립변수로 군집분석을 한 하반신 체형변인과 직물에 의한 플레어 스커트의 외관형상을 분석하기 위하여 영상처리를 이용하여 착용실험을 한 결괴는 다음과 같다. 1. 플레어 스커트의 헴라인 단면형상 분석 결과 체형변인에 의한 플레어 스커트의 드레이프 면적과 드레이프 계수는 드레이프의 면적이 크면 드레이프 계수도 큰 값을 나타내었다. 직물의 노드수는 드레이프성이 좋을수록 많이 형성되고 노드수가 많으면 노드지수 값은 작은 값을 가진다. 노드지수 값이 크면 노드의 고저가 균일하게 나타나고 작으면 노드의 고저가 불균일하게 나타난다. 또한 인체 측정치수의 허리둘레와 엉덩이둘레의 차이, 허리너비와 엉덩이너비의 차이 값이 큰 마름모형 체형변인에서 노드수는 많이 나타나고 노드지수 값은 작게 나타났다. 통형에 가까운 체형변인은 노드지수가 큰 값을 나타내므로 노드의 고저가 균일하게 나타났다. 직물의 노드수가 많으면 노드산 평균은 낮고, 노드지수 값이 큰 반면 노드수가 작으면 노드산펑균이 높으므로 노드산과 곡의 고저가 심하게 나타났다. 그러므로 직물의 드레이프성이 우수하다 할지라도 적정의 중량을 가지지 않으면 노드가 불균일하게 형성되어 의복 외관의 좋은 외관형상을 형성하지 못하는 결점이 나타나는 것으로 해석되었다. 2. 플레어 스커트의 헴라인 단면의 최대횡경은 인체측정값의 너비항목과 최대종경은 두께항목과 관련성이 높은 것으로 나타났다. 단면비의 값이 크면 최대횡경의 값이 크고 최대종경의 값이 작은 타원형에 가까운 단면형상이 나타나고, 단면비의 값이 작으면 최대횡경 값이 작고 최대총경 값이 큰 원형에 가까운 단변형상으로 나타났다. 3. 플레어 스커트의 외관형상 분석 결과 정면처짐분은 둘레항목, 너비항목 시아항목의 차이 값이 작을수록, 직물의 드레이프성이 좋을수록 크게 나타났다. 미혼여성과 기혼여성을 비교해 보면 기혼여성의 체형이 너비, 둘레항목사이의 치어 값이 적기 때문에 처짐분이 크게 나타났다. 측면처짐분은 인체측정값의 두께항목과 상관이 깊어 앞부분은 배두께가 클수록, 뒷부분은 엉덩이두께가 클수록 처짐분량이 크게 나타났다. 후면처짐분은 정면과 같이 S시료에서 드레이프성이 좋을수록 처짐분이 크고, 엉덩이너비는 크고, 엉덩이두께가 작올수록 처짐분이 크게 나타났다. 4. 플레어 스커트의 3차원 입체형상은 외관형상의 굴곡이 낮아 평평할 수록 이미지의 평균값은 높고 편차는 낮게 나타났다. 체형변인에 의한 플레어 스커트의 주름 형상을 정면, 측면, 후면에서 이미지 값 분포로 비교해 보면 정면, 후면보다 측면의 외관이 평활하여 이미지 분포폭이 좁게 나타나고 최빈값을 중심으로 회색에 가까운 쪽으로 치우쳐 있는 것을 불 수 있다. 5. 체형변인에 따른 플레어 스커트의 주름특성을 평가하기 위하여 영상처리법으로 얻은 결과를 3차원 업체형상으로 분석하기 위하여 6개의 영역을 측정한 결과 플레어 스커트는 체형유형에 따라 곡면을 형성하는 주름의 수와 주름강도가 다르게 나타나 위 아랫부분의 주름폭은 차이가 있었다. 위부분에서 아랫부분으로 내려올수록 주름높이 폭은 커졌다. 그러므로 주름의 높이와 플레어 스커트의 헴라인 단연형상의 노드각도와 밀접한 관련이 있는 것으로 나타났다. 즉, 주름의 높이가 높으면 노드 각도는 작은 값을 보이고, 주름의 높이가 낮으면 노드각도는 큰 값을 나타내었다.

• 한국의상디자인학회지
• /
• 제14권1호
• /
• pp.81-96
• /
• 2012

The purpose of this study is to provide fundamental information for standardization of 3D body measurement. This research analyzes errors occurring in the process of extracting body size from 3D body scan data. First, as a result of analyzing basic state of the 3D body scanner's calibration, the point number of each section was almost the same, while the right and left as well as the front and back coordinates of the center of gravity are not, showing unstable data. Nevertheless, the latter does not influence on the size of cylinder such as width and circumference. Next, we analyzed point coordinates variations of scan data on a mannequin nude by life casting. The result was great deflection in case of complicated or horizontal sections including the reference point beyond proper distance from centers of four cameras. In case of the mannequin's size, accuracy proves comparatively high in that measurement errors in height, width, depth, and length dimension occurred all within allowable errors, only except chest depth, while there were a lot of measurement errors in a circumference dimension. Secondly, analysis of accuracy of automatic extraction identification program algorithm presented that a semi-automatic measurement program is better than an automatic measurement program. While both of them ate very acute in parts related to crotch, they are not in armpit related parts. Therefore, in extracting of human body size from 3D scan data, what really matters seems to parts related to armpits.

• International Journal of Costume and Fashion
• /
• 제5권1호
• /
• pp.1-13
• /
• 2005

Two hundreds of female aged 19 years old and up were recruited to evaluate the postural changes and bilateral variation of asymmetry over age. To find out the differences among the age group, subjects were classified into 5 groups, early young age(19-29), late young age(30-39), early middle age(40-49), late middle age(50-59), and old age(60-). 35 body measurements were taken by the 3-D body scanner which allowed us to take measurements which cannot be measured using traditional methods, including the shape of a cross section, slice area surface are, and volume. Bilateral variations were observed as a function of age; Depth of scapular point level, scapular point to center back, and blade angle. Postural change of anterior cervical angle, upper anterior thoracic angle, upper posterior thoracic angle, posterior cervical angle, and center back/center front ratio were also exhibited. In each measurements, subjects were classified into normal, and abnormal group. Percentiles of abnormal in shoulder line angle, blade angle, neck point $\∼$ acromial point $\∼$ scapular point, posterior cervical angle, and upper posterior thoracic angle were increased over age group. The upper body of lateral view was classified into 3 types of posture based on the previous research; straight, erect(leaning back), and stooped(bent forward). The percentiles of subjects who have straight postures were decreased as a function of age, but those of stooped postures were increased. Subjects who have erect postures did not so. The stooped posture group shows the big cervical fossa angle, anterior cervical angle, posterior cervical angle, upper posterior thoracic angle, and the small upper anterior thoracic angle comparing to the straight and erect posture group. These results could be apply for clothing construction reflecting the changes in back, shoulder, neck, and the bilateral asymmetry according to the target age group.

• 복식문화연구
• /
• 제32권2호
• /
• pp.215-231
• /
• 2024

The changing media landscape has diversified how and what is discussed about fashion. This study aims to examine expert discussions about fashion shows on social media from the perspective of fashion criticism. To achieve this goal objectively, a text mining program, Leximancer, was used. In total, 58 videos were collected from the panel discussion section of Showstudio from S/S 21 to S/S 24, and the results of text mining on 24,080 collected texts after refinement are detailed here. First, the researchers examined the frequency of keywords by season. This revealed that in 2021-2022, digital transformation, diversity, and fashion films are now commonly used to promote fashion collections, often replacing traditional catwalk shows. From 2023, sustainability and virtuality appeared more frequently, and fashion brands focused on storytelling to communicate seasonal concepts. In S/S 2024, the rise of luxury brand keywords and an increased focus on consumption has been evident. This suggests that it is influenced by social and cultural phenomena. Second, the overall keywords were analyzed and categorized into five concepts: formal descriptions and explanations of the collection's outfits, sociocultural evaluations of fashion shows and designers, assessments of the commerciality and sustainability of the current fashion industry, interpretations of fashion presentations, and discussions of the role of fashion shows in the future. The significance of this study lies in its identification of the specificity of contemporary fashion criticism and its objective approach to critical research.

• 한국컴퓨터정보학회논문지
• /
• 제27권8호
• /
• pp.161-168
• /
• 2022

본 연구에서는 20대 경도비만 남성을 대상으로 시판 남성용 상체 보정속옷에 대한 착용만족도를 알아보고 개선점을 파악하고자 하였다. 피험자는 20대 남성이면서 BMI지수가 25~30인 (경도비만)인 사람으로 15명을 선정했다. 연구 결과, 남성들의 보정속옷에 대한 인지도와 관심도는 낮은 편이었다. 착용 만족도 조사에서는 입고 벗을 때 불편하다고 부정적으로 답한 사람이 많았다. 압박감면에서는 초반에는 압박감이 강하다고 느끼지만 시간이 지날수록 익숙진다고 하였다. 답답함과 더위와 관련하여 부정적으로 응답한 사람이 과반을 넘었고 땀 흡수 및 배출과 관련해서도 부정적인 의견이 많았다. 시각적인 부문에서는 가슴 보정, 허리 옆부분 보정, 허리 앞부분에서 모두 긍정적인 반응을 보였다. 결론적으로, 남성용 상체 보정속옷의 개선점은 과한 압박감이 가져다주는 답답함과 소화불량, 여름철을 고려하여 더위와 땀과 관련한 기능성 부분인 것으로 나타났다.