• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2001

The computations of the turbulent flow around the ship models with the free-surface effects were carried out. Incompressible Reynolds-Averaged Navier-Stokes equations were solved by using an explicit finite-difference method with the nonstaggered grid system. The method employed second-order finite differences for the spatial discretization and a four-stage Runge-Kutta scheme for the temporal integration. For the turbulence closure, a modified Baldwin-Lomax model was exploited. The location of the free surface was determined by solving the equation of the kinematic free-surface condition using the Lax-Wendroff scheme and a free-surface conforming grid was generated at each time step so that one of the grid boundary surfaces always coincides with the free surface. An inviscid approximation of the dynamic free-surface boundary condition was applied as the boundary conditions for the velocity and pressure on the free surface. To validate the computational method developed in the present study, the computations were carried out for beth Wigley and Series 60 $C_B=0.6$ ship model and the computational results showed good agreements with the experimental data.

• Archives of Plastic Surgery
• /
• v.35 no.2
• /
• pp.169-173
• /
• 2008

Purpose: Sacrococcygeal pilonidal sinus is a chronic inflammatory disease that mostly affects young people, which warrants surgical intervention. Although many surgical methods have been suggested, an optimal surgical method remains controversial because of high recurrence rates and postoperative complications. The objective of this study is to evaluate the results of wide excision and coverage with fasciocutaneous advancement flap for the treatment of sacrococcygeal pilonidal sinus, and to assess the usefulness of this method Methods: From May 1995 to October 2006, the authors treated 19 patients with the use of coverage with fasciocutaneous flap after wide excision. The results were evaluated regarding recurrence rates, complications, and the change in sensitivity of the gluteal region after surgery. The follow-up period was 7 to 142 months (mean, 76 months). All patients were male. Results: Postoperative complications were wound infection at the suction drain insertion site and skin necrosis around the suture margin in one case, respectively. During the follow up period, only one recurrence (5.3%) was seen in fifth postoperative month, which was successfully treated by the same operative procedure. There was no other complications such as seroma, hematoma, wound dehiscence and flap loss. Extensive scarring and anatomic distortion did not occur in the reconstructed area. In addition, sensitivity of the gluteal region did not diminish. The aesthetic results were satisfactory for all patients as well. Conclusion: The authors advocate that fasciocutaneous flap closure be a good alternative method to cover defects after the excision of sacrococcygeal pilonidal sinus.

• Tunnel and Underground Space
• /
• v.24 no.4
• /
• pp.282-288
• /
• 2014

Stoping method has been acknowledged as one of the typical metalliferous underground mining methods. Notwithstanding with the popularity of the method, the majority of stoping mines are suffering from excessive unplanned dilution which often becomes as the main cause of mine closure. Thus a reliable unplanned dilution management system is imperatively needed. In this study, reliable unplanned dilution prediction system is introduced by adopting artificial neural network (ANN) based on data investigated from one underground stoping mine in Western Australia. In addition, contributions of input parameters were analysed by connection weight algorithm (CWA). To validate the reliability of the proposed ANN, correlation coefficient (R) was calculated in the training and test stage which shown relatively high correlation of 0.9641 in training and 0.7933 in test stage. As results of CWA application, BHL (Length of blast hole) and SFJ (Safety factor of Joint orientation) show comparatively high contribution of 18.78% and 19.77% which imply that these are somewhat critical influential parameter of unplanned dilution.

• Fisheries and Aquatic Sciences
• /
• v.16 no.3
• /
• pp.159-164
• /
• 2013

The mouse bioassay and high performance liquid chromatography (HPLC) post-column oxidation method are different methods of quantifying paralytic shellfish poisoning toxins. In this study, we compared their ability to accurately quantify the toxicity levels in two types of field sample (oysters and mussels) with different toxin profiles for routine regulatory monitoring. A total of 72 samples were analyzed by both methods, 44 of which gave negative results, with readings under the limit of detection of the mouse bioassay ($40{\mu}g/100g$ saxitoxin [STX] eq). In 14 oysters, the major toxin components were gonyautoxin (GTX) 1, -2, -3, -4, -5, decarbamoylgonyautoxin-2 (dcGTX2), and decarbamoylsaxitoxin (dcSTX), while 14 mussels tested positive for dcSTX, GTX2, -3, -4, -5, dcGTX2, neosaxitoxin (NEO), STX, and dcSTX. When the results obtained by both methods were compared in two matrices, a better correlation ($r^2=0.9478$) was obtained for mussels than for oysters ($r^2=0.8244$). Additional studies are therefore needed in oysters to investigate the differences in the results obtained by both methods. Importantly, some samples with toxin levels around the legal limit gave inconsistent results using HPLC-based techniques, which could have a strong economic impact due to enforced harvest area closure. It should therefore be determined if all paralytic shellfish poisoning toxins can be quantified accurately by HPLC, and if the uncertainties of the method lead to doubts regarding regulatory limits.

• Korean Journal of Cleft Lip And Palate
• /
• v.15 no.2
• /
• pp.61-68
• /
• 2012

Cleft lip and palate is the most common congenital facial malformation and has a significant developmental, physical, and psychological impact on those with the deformity and their families. When treating the patients with unilateral cleft lip, many surgeons adopt the rotation advancement flap method originally developed by Millard, or the triangular flap technique developed by Tennison, Randall or the modifications of these techniques. Among these, Millard's rotation advancement flap method has its advantage in designing the flap using the patient's anatomic landmarks. For performing this rotation advancement technique, skillful operation is needed to obtain esthetically satisfactory results. Vomer flap sometimes is used to repair anterior hard palate in complete cleft lip and palate patients. Vomerine tissue is readily available in the vicinity of the palatal defect and elevation of the vomerine flap is relatively simple procedure. In this article, we will introduce the comprehensive vomer flap technique conjunction with primary lip closure and review the comparative studies of the outcome of simultaneous repair of cleft lip and cleft hard palate with Millard's rotation advancement method and vomer flap.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.389-398
• /
• 2002

The mixed mode problem (I and II) of a peny-shaped interface cracks in remote tension loading on a bi-material cylinder is studied using finite element method. The energy release rates for the tip of the crack in the interface were calibrated for several different moduli combinations and crack ratios using the modified crack closure integral technique and J-integral method, with numerical results obtained from a commercial finite element program. Numerical results show that non-dimensional value of$\sqrt{G_{II}E^*}/\sqrt[p]{\pi a}$ increases as the crack size or moduli ratio increases. Meanwhile, non-dimensional value of$\sqrt{G_{I}E^*}/\sqrt[p]{\pi a}$ decreases as the moduli ratio increases, but above the moduli ratio of 3 its value decreases then increases again as the crack size increases. Reliability of the numerical analysis in this study was acquired with comparison to an analytical solution for the peny-shaped interface crack in an infinite medium.

• Archives of Plastic Surgery
• /
• v.34 no.2
• /
• pp.250-257
• /
• 2007

Purpose: Aging changes of midface include drooping of lower lid, wrinkles of malar area, orbitomalar groove and deepening of nasolabial fold from drooping of malar fat pad. Improvement of lower lid can be achieved through lower blepharoplasty, but improvement of cheek can not be gained. Superficial subciliary cheek lift(by Moelleken, 1996) is a method that lifts malar fat pad through extended subciliary incision. We obtained simultaneous improvement of lower lid, malar wrinkles and orbitomalar groove with modification of this technique. Methods: From December 2003 to January 2006, we performed this method on 21 patients among volunteers for lower blepharoplasty who wanted to correct orbitomalar groove and malar wrinkles. Under local anesthesia, lateral extension of subciliary incision is done 1cm from the lateral orbital rim. Skin-muscle flap is elevated, and dealing of orbital fat and septum is the same as with ordinary lower blepharoplasty. After downward subcutaneous dissection through extended incision, exposing the upper 1/3 level of malar fat pad, superolateral fixation is done to superior deep temporal fascia. Excision of the upper part of fat pad is performed, if needed. After excision of overlapped skin-muscle flap, skin closure is done. Results: We obtained satisfactory results with this simple method for improvement of orbitomalar groove and malar wrinkles among patients for lower blepharoplasty. During a follow-up period of 5 months on the average, no revision was performed. Conclusion: Under local anesthesia, lower blepharoplasty and improvement of orbitomalar groove and malar wrinkles can be achieved at the same time. It is good for patients who do not want conventional midface-lifting. But surgeons should select patients and perform cautiously for it may leave a scar of the extended incision that require over 2 months for maturation and it is insufficient for improvement of nasolabial fold compared to conventional mid face-lifts.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1845-1851
• /
• 2007

Background noise and room reverberation are two causes of degradation in speech in listening situations. Many algorithms developed to enhance reverberant speech. In this paper we propose a dereverberation method for enhancement of speech using modified the linear prediction(LP) residual in reverberant room condition. The proposed dereberberation method based on the fact that the signification excitation of the vocal tract system takes place at the instant of glottal closure in voiced speech. Our method used delay information form each sensor, and we need reverberant signals from 3 sensors. We obtain a new LP residual signal using modified IP residual combination which derived form weighting of the LP residual and the Hilbert transform of LP residual. The nature of the coherently added Hilbert envelop has several large amplitude spikes because of the effects of noise and reverberation. This residual of the clean speech is used to excite the time-varying all-pole filter to obtain the enhanced speech. We achieved simulation of proposed algorithm for performance analysis in reverberation environment. The proposed algorithm improves substantially the quality of reverberant speech.

• Archives of Aesthetic Plastic Surgery
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2017

Background Creating a natural-looking umbilicus during closure of the donor-site in abdominally based free flap breast reconstruction is a factor of satisfaction for both the patient and surgeon. We present a simple method of umbilical transposition that results in an aesthetic, natural-looking umbilicus. Methods From March 2011 to November 2014, fifty three consecutive female patients received abdominal flap breast reconstruction. Twenty patients (from March 2011 to February 2013) underwent umbilical transposition through a cross like incision in the abdominal flap, with fascial fixation sutures but no dermal flaps. Thirty three patients (March 2013 to November 2014) received umbilical transposition in the following method. An oval-shaped incision is made at the location of the new umbilicus on the abdominal flap. This oval is deepithelialized, and full-thickness incisions are made at the 2, 6, and 10 o'clock directions to create three triangular dermal flaps. These are pulled down to the abdominal fascia using sutures that pass through the umbilical stalk and the abdominal fascia at the 3, 9, and 12 o'clock directions. This results in an umbilical stalk lined with dermal flaps, creates a natural periumbilical concavity, and anchors the abdominal flap inward to minimize tension. The cranial flap enhances superior hooding. Results Patient and surgeon satisfaction, surveyed 2 months after surgery with a satisfaction scoring system, were higher in the dermal flap group. Conclusions The technique using three dermal flaps in an oval skin incision is simple, relatively easy to learn, and results in an aesthetic, natural-looking umbilicus.

• Water Engineering Research
• /
• v.3 no.2
• /
• pp.75-84
• /
• 2002

An Euler-Lagrange two-phase flow model is presented fur simulation sheet-flow transport under wave and current. The flow is computed by solving the Reynolds Averaged Navier-Stokes equation in conjunction with the k-$\varepsilon$ turbulence model for turbulence closure. The sediment transport is introduced as a motion of granular media under the action of unsteady flow from the Lagragian point of view. In other word, motion of every single particle is numerically traced with Movable Bed Simulator (MBS) code based on the Distinct Element Method (DEM), in which the frequent interparticle collision of the moving particles during the sheet-flow transport is sophisticatedly taken into account. The particle diameter effect on time-dependent developing process of sheet-flow transport is investigated, by using three different diameter sizes of sediment. The influence of an imposed current on oscillatory sheet-flow transport is also investigated. It is concluded that the sediment transport rate increases due to the relaxation process related to the time-lag between flow velocity and sediment motion.