• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.949-954
• /
• 2013

We measured and analyzed the brain waves to observe the characteristics of human drowsiness. The basic method is to analyze the EEG(Electroencephalography) signals from subjects according to the frequency bands. It has been reported that alpha waves are related to a wakefulness state, an eye closure state and a state that begins to sleep. In this study, therefore, we restricted the frequency band for analyzing to between 8 and 13Hz called brain's alpha waves. We observed which components had a stronger influence on human drowsiness among the restricted frequency band and represented the experimental results to analyze using the power spectrum method.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.2009-2020
• /
• 2004

A parametric study of the factors controlling static and dynamic denting, as well as local stiffness, has been made on simplified panels of different sizes, curvatures, thicknesses and strengths. Analyses have been performed using the finite element method to predict dent resistance and panel stiffness. A parametric approach is used with finite element models of simplified panels. Two sizes of panels with square plan dimensions and a wide range of curvatures are analysed for several combinations of material thickness and strength, all representative of auto-motive closure panels. Analysis was performed using the implicit finite element code, LS-NIKE, and the explicit dynamic code, LS-DYNA for the static and dynamic cases, respectively. Panel dent resistance and stiffness behaviour are shown to be complex phenomena and strongly interrelated. Factors favouring improved dent resistance include increased yield strength and panel thickness. Panel stiffness also increases with thickness and with higher curvatures but decreases with size and very low curvatures. Conditions for best dynamic and static dent performance are shown to be inherently in conflict ; that is, panels with low stiffness tend to perform well under impact loading but demonstrate inferior static dent performance. Stiffer panels are prone to larger dynamic dents due to higher contact forces but exhibit good static performance through increased resistance to oil canning.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.168-174
• /
• 2005

Reconstruction of the lower lip requires consideration of several factors. There should be retained sensation, maintenance of oral sphincter function, and a large enough opening for the mouth. In addition, it is important to achieve an aesthetically acceptable appearance. Webster's modification of Bernard operation is one of good methods which satisfy above mentioned goals. The purpose of this article is to present the results and review the perioperative problems after reconstruction of the lower lip by this operation. We reviewed seven patients after surgical reconstruction by the same method between January of 1996 and December of 2003. Five patients were male and two were female. The mean follow-up period was 15 months. We obtained functionally and cosmetically acceptable appearance after reconstruction. Most of the reconstructed lower lips were large enough for full mouth opening, but one patient required additional commissuroplasty, and one other patient was treated with wound revision for dehiscence resulting from protrusion of mandibular lateral incisor tooth. All other patients accepted their facial appearance. In conclusion, careful planning and consideration for dental problems and proper closure tension may ensure satisfactory outcome & lower lip competence, when using this modified operative method for lower lip reconstruction.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.479-486
• /
• 2016

System-on-chip (SoC) designs have a number of flip-flops; the more flip-flops an SoC has, the longer the associated scan test application time will be. A scan shift operation accounts for a significant portion of a scan test application time. This paper presents physical-aware approaches for speeding up scan shift operations in SoCs. To improve the speed of a scan shift operation, we propose a layout-aware flip-flop insertion and scan shift operation-aware physical implementation procedure. The proposed combined method of insertion and procedure effectively improves the speed of a scan shift operation. Static timing analyses of state-of-the-art SoC designs show that the proposed approaches help increase the speeds of scan shift operations by up to 4.1 times that reached under a conventional method. The faster scan shift operation speeds help to shorten scan test application times, thus reducing test costs.

• Journal of computational fluids engineering
• /
• v.17 no.1
• /
• pp.94-100
• /
• 2012

In this paper, the cavitating flows around a hydrofoil have been numerically investigated by using a 2-d multi-phase RANS flow solver based on pseudo-compressibility and a homogeneous mixture model on unstructured meshes. For this purpose, a vertex-centered finite-volume method was utilized in conjunction with 2nd-order Roe's FDS to discretize the inviscid fluxes. The viscous fluxes were computed based on central differencing. The Spalart-Allmaras one equation model was employed for the closure of turbulence. A dual-time stepping method and the Gauss-Seidel iteration were used for unsteady time integration. The phase change rate between the liquid and vapor phases was determined by Merkle's cavitation model based on the difference between local and vapor pressure. Steady state calculations were made for the modified NACA66 hydrofoil at several flow conditions. Good agreements were obtained between the present results and the experiment for the pressure coefficient on a hydrofoil surface. Additional calculation was made for cloud cavitation around the hydrofoil. The observation of the vapor structure, such as cavity size and shape, was made, and the flow characteristics around the cavity were analyzed. Good agreements were obtained between the present results and the experiment for the frequency and the Strouhal number of cavity oscillation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.62-69
• /
• 1986

Fatigue surface crack growth was studied in 7075-T651 aluminum alloy plates subjected largely to bending loads. The surface crack length and its depth were measurement by the unloading elastic compliance method. The surface crack growth rate dc/dN, on the surface and da/dN, in the depth direction were obtained by the secant method. The stress intensity factor range .DELTA.K was computed by means of Newman and Raju equation. The aspect ratio a/c was presented in form of a/c=0.815-0.853(a/T). The effect of the stress ratio on the stable surface crack growth rates under increasing .DELTA.T is larger in lower .DELTA.K, while the relation between dc/dN, da/dN and the effective stress intensity factor range .DELTA.K$_{eff}$ is weakly dependent on the stress ratio.o.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.388-394
• /
• 2005

Recently, the authors have developed a method for real-time dynamics of multibody systems, which combines a semi-recursive formulation to derive the equations of motion in dependent relative coordinates, along with an augmented Lagrangian technique to impose the loop closure conditions. The following numerical integration procedures, which can be grouped into the so-called structural integrators, were tested : trapezoidal rule, Newmark dissipative schemes, HHT rule, and the Generalized-${\alpha}$ family. It was shown that, for large multi body systems, Newmark dissipative was the best election since, provided that the adequate parameters were chosen, excellent behavior was achieved in terms of efficiency and robustness with acceptable levels of accuracy. In the present paper, the performance of the described method in combination with another group of integrators, the Implicit Runge-Kutta family (IRK), is analyzed. The purpose is to clarify which kind of IRK algorithms can be more suitable for real-time applications, and to see whether they can be competitive with the already tested structural family of integrators. The final objective of the work is to provide some practical criteria for those interested in achieving real-time performance for large and complex multibody systems.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.145-155
• /
• 1998

A computer code has been developed for the computation of the viscous flow around a ship model with the free surface. In this code, the incompressible Reynolds-averaged Navier-Stokes equations are solved numerically by a finite difference method which employes second-order finite differences for the spatial discretization and a four-stage Runge-Kutta scheme for the temporal integration of the governing equations. For the turbulence closure, a modified version of the Baldwin-Lomax model is exploited. The location of the free surface is determined by solving the equation of the kinematic free-surface condition using the Lax-Wendroff scheme and the boundary-fitted grid is generated at each time step so that one of the grid surfaces always coincides with the free surface. An inviscid approximation of the dynamic free-surface boundary condition is applied as the boundary conditions for the velocity and pressure on the free surface. To validate the computational method and the computer code developed in the present study, the numerical computations are carried out for both Wigley parabolic hull and Series 60 $C_B=0.6$ ship model and the computational results are compared with the experimental data.

• Tunnel and Underground Space
• /
• v.5 no.1
• /
• pp.1-10
• /
• 1995

The behavior of a jointed rock mass depends mainly on the geometrical and mechanical properties of joints. The failure mode of a rock mass and kinematics of rock blocks are governed by the orientation, spacing, and persistence of joints. The mechanical properties such as dilation angle, shear strength, maximum closure, strength of asperities and friction coeffiient play important roles on the stability and deformation of the rock mass. The normal and shear behaviour of a joint are coupled due to dilation, and the joint deformation depends also on the boundary conditions such as stiffness conditons. In this paper, the joint constitutive law including the dilatant behaviour of a joint is numerically modelled using the edge-to-edge contact logic in distinct element method. Also, presented is the method to quantify the input parameters used in the joint law. The results from uniaxial compression and direct shear tests using the numeical model of the single joint were compared to the analytic results from them. The boundary effect on the behaviour of a joint is verified by comparing the results of direct shear test under constant stress boundary condition with those under constant stiffness boundary condition. The numerical model developed is applied to a complex jointed rock mass to examine its performance and to evaluate the effect of joint dilation on tunnel stability.

• Journal of Chest Surgery
• /
• v.33 no.9
• /
• pp.729-733
• /
• 2000

Background: Recent trends suggest that minimally invasive cardiac surgery reduces postoperative morbidity and offers a cosmetic benefit. This study was performed to evaluate the CPB time, ACC time, OP time, ICU stay and postoperative hospital stay following a lower partial sternotomy and those of the median sternotomy. Material and Method: A group of 26 adult patients who underwent cardiac surgery through lower partial sternotomy from August 1997 to July 1999(A group) were compared to 45 adult patients who underwent cardiac surgery through median sternotomy from January 1996 to July 1997(B group). The mean ages(46.4$\pm$14.6 years, A group and 46.8$\pm$13.2 years, B group) were similar. Operations were performed with central cannula and antegrade/retrograde blood cardioplegia. Result: There was no death in each group. No differences were found in CPB time, ACC time, OP time, ICU stay and postoperative hospital stay. Postoperative complications were sternal splitting in a patient in group A and a patient with bleeding that required reoperation and a patient with delayed wound closure in group B. Conclusion: The lower partial sternotomy offered a cosmetic benefit, but does not significantly reduced the length of operative time and hospital stay. Minimally invasive cardiac surgery will be applied increasing because of the suggested advantage and choosing a proper operative technique will be helpful.