• Journal of the Korean housing association
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2006

The purpose of this study is to understand how visual factors of healthcare facilities would have an effect on psycho-physiological health of inpatients. First, visual factors of a ward, where inpatients mostly spend their time in a hospital, were extracted in order to find out how visual environment would affect inpatient's health. Then experimental samples were made and inpatients' reactions against them were analyzed. This study is composed of two approaches a questionnaire for psychological analysis and an electroencephalogram measurement for physiological analysis. The results of this experiment show that psycho-physiological health of subject's can be remarkably improved according to artificial arrangement of visual environment of a ward. Especially, they also show that insignificant changes of visual environment such as furnishing trees, flowerpots or framed pictures in a ward, where there is no view and completely closed, will be able to exert a range of positive effects on an subject's psycho-physiological health. In conclusion, further studies need to be delivered about indoor designs to positively bring in natural elements to a ward as well as visibility ratio of views and skylines from a ward.

• Journal of Hydrogen and New Energy
• /
• v.17 no.3
• /
• pp.279-285
• /
• 2006

Recirculation for the unreacted fuel is necessary to improve the overall efficiency of the fuel cell system and to prevent fuel starvation since the fuel cell for a vehicle application is a closed system. In case of the automotive fuel cell, the ejector which does not require any parasitic power is good for the performance improvement and easy operation. It is essential to design the customized ejector due to the lack of the commercial ejector corresponding to the operating conditions of the fuel cell systems. In this study, the design methodology for the ejector customized to an automotive fuel cell is proposed. The model based sensitivity analysis prevents the time-consuming redesign and reduces the cost of developing ejector. As a result, the customized ejector to meet the desired performance within overall operating range has developed for the PEMFC automotive system.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.7
• /
• pp.399-405
• /
• 2002

This paper presents an implementation of digital high-performance Position sensorless motion control system of an induction motor drives with Direct Torque Control(DTC). The system consist of closed loop stator flux and torque observer, speed and torque estimators, two hysteresis controller, optimal switching look-up table, IGBT voltage source inverter, and TMS320C31 DSP board. The stator flux observer is based on the combined current and voltage model with stator flux feedback adaptive control of which inputs are current and voltage sensed on motor terminal for wide speed range. The speed observer is using the model reference adaptive system(MRAS) with rotor flux linkages for speed turning signal. The simulation and experimental results are provided to evacuate the consistency and the performance of the suggested position sensorless control algorithm. The developed position sensorless system are shown a good motion control response characteristic and high performance features using 2.2[kw] general purposed induction motor.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.9
• /
• pp.418-423
• /
• 2003

This paper describes an electronic compass using micromachined X- and Y-axis micro fluxgate sensors which were perpendicularly aligned each other to measure X- and Y-axis magnetic fields respectively. The fluxgate sensor was composed of rectangular-ring shaped magnetic core and solenoid excitation(49 turns) and pick-up(46 turns) coils. Excitation and pick-up coil patterns which were formed opposite to each other wound the magnetic core alternatively to improve the sensitivity and to excite the magnetic core in an optimal condition with reduced excitation current. The magnetic core has DC effective permeability of ~1000 and coercive field of ~0.1 Oe. The magnetic core is easily saturated due to the low coercive field and closed magnetic path for the excitation field. To decrease the difference of induced second harmonic voltages from X- and Y-axis, excitation condition of 2.8 $V_{P-P}$ and 1.2 MHz square wave was selected. Excellent linear response over the range of -100 $\mu$T to +100 $\mu$T was obtained with 210 V/T sensitivity. The size of each micro fluxgate sensor excluding pad region was about 2.6${\times}$1.7 $mm^2$ and the power consumption was estimated to be 14 mW.W.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.151-155
• /
• 2002

This paper presents a micro fluxgate magnetic sensor in printed circuit board (PCB). The fluxgate sensor consists of five PCB stack layers including one layer magnetic core and four layers of excitation and pick-up coils. The center layer as a magnetic core is made of a micro patterned amorphous magnetic ribbon with extremely high DC permeability of ∼100,000 and the core has a rectangular-ring shape. The amorphous magnetic core is easily saturated due to the low coercive field and closed magnetic path for the excitation field. Four outer layers as an excitation and pick-up coils have a planar solenoid structure. The chip size of the fabricated sensing element is 7.3${\times}$5.7m㎡. Excellent linear response over the range of -100${\mu}$T to +100${\mu}$T is obtained with 540V/T sensitivity at excitation square wave of 3V$\_$P-P/ and 360kHz. The very low power consumption of ∼8mW was measured. This magnetic sensing element which measures the lower fields than 50${\mu}$T, is very useful for various applications such as: portable navigation systems, military research, medical research, and space research.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.702-707
• /
• 2002

This paper presents a micro fluxgate sensor in printed circuit board (PCB). The fluxgate sensor consists of five PCB stack layers including one layer magnetic core and four layers of excitation and pick-up coils. The center layer as a magnetic core is made of a micro patterned amorphous magnetic ribbon and the core has a rectangular-ring shape. The amorphous magnetic core is easily saturated due to the low coercive field and closed magnetic path for the excitation field. Four outer layers as an excitation and pick-up coils have a planar solenoid structure. The chip size of the fabricated sensing element is 7.3$\times$5.7$\textrm{mm}^2$. Excellent linear response over the range of -100$\mu$T to +100$\mu$T is obtained with 540V/T sensitivity at excitation square wave of 3 $V_{p-p}$ and 360kHz. The very low power consumption of ~8mW was measured. This magnetic sensing element, which measures the lower fields than 50$\mu$T, is very useful for various applications such as: portable navigation systems, military research, medical research, and space research.h.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.5
• /
• pp.9-17
• /
• 2010

Corrective control compensates the stable-state behavior of asynchronous sequential machines so that the closed-loop system can be changed in a desirable way. Using corrective control, we present a novel fault tolerance scheme that overcomes permanent faults for asynchronous sequential machines. When a permanent fault occurs to an asynchronous machine, the fault is not recovered forever while the machine is irreversibly stuck in a set of failure states. But, if the machine has control redundancy in the limited behavior range, corrective control can be applied to solve the fault tolerance problem against permanent faults. We present the condition on detecting permanent faults and the existence condition of an appropriate corrective controller. The design procedure for the proposed controller is described in a case study.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.1
• /
• pp.54-61
• /
• 2001

Condensing heat transfer coefficients of R-22 and R-134a were measured in smooth, horizontal copper tubes with inner diameters of 1.77mm, 3.36mm, and 5.35mm, respectively. The experiments were conducted in the closed loop, which was driven by a magnetic gear pump. Data are presented for the following range of variables : mass velocity from 200 to 500kg/$m^2$.s and quality from 0 to 1.0. The heat transfer coefficients in the small diameter tubes (ID < 7mm) were observed to be strongly affected by various diameters and the heat transfer characteristics in the small diameter tubes differed from those in the large diameter tubes. Heat transfer coefficients in the small diameter tubes are higher than those in the large diameter tubes at the same experimental condition. It was found that some well-known previous correlations(Shahs correlation and Cavallini-Zecchins correlation) were not suitable for small diameter tubes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.23-30
• /
• 2008

As a basic machining process, turning is a widely used machining process in which a single-point cutting tool removes material from the surface of a rotating material. A common method of evaluating machining performance is to measure the surface roughness. In a turning operation, it is important to select cutting conditions for achieving high cutting performance. As a rule, cutting conditions can be classified into feed rate, depth of cut and insert radius. While cutting process even though cutting conditions are optimized, the average roughness can be deterioration due to wear of the cutting tool edge. In this study, the aim is to maintain the average roughness even though the cutting condition is irregularly changing within the predictable range due to the working environment. First, the surface roughness model influenced by cutting conditions is constructed based on the experimental results in a turning operation, Second, applying the sliding mode control theory to the turning operation model which is composed of the surface roughness model and the motor transfer function, the surface roughness is closed to the desired value. Finally, the effectiveness of this approach is demonstrated through the computer simulation.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.13 no.2
• /
• pp.151-154
• /
• 2002

Background and Objectives : The pitch range of the human voice is variable, extending from chest register to falsetto register. Although numerous studies have investigated after laryngeal mechanism description of falsetto tone, systematic and objective studies were lack. The purpose of this study was to systematically analyze and compare modal with falsetto voice. Materials and Methods : Seven adult baritones were selected from a larger population of volunteers at choir. Simultaneous measurements of acoustic, electroglottographic and aerodynamic study were made during /e/ sustained in two vocal registers, lowest modal and highest falsetto. Statistical analysis was performed using Wilkoxson signed rankes test. Results : In the acoustic analysis, shimmer was increased in flasetto voice(p<0.05). In the electroglottographic analysis, closed quotient(CQ), speed quotient(SQ) at the modal voice were higher than at the falsetto voice(p<0.05). In the aerodynamic analysis, and airflow rate(MFR) of falsetto voice was higher than modal voice(p<0.05). Conclusions : In the results of the study indicate that, falsetto register ineffective, inefficient, generally unpleasant because it was produced by incomplete clousure of true vocal cord. We anticipated that further study with large samples can provide an objective criteria for status and classification of singer's modal and falsetto voice.