• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.199-203
• /
• 2003

Idler of excavator are large product with diameter 500 - 600 mm and parts of a power transmit device. The object of the paper is developed large products by hot closed-die forging. The forging process which is proposed from numerical analysis and various tests is developed a large products with good quality. To estimate the design process parameters such as working load, temperature and flash thickness so on, numerical analysis are used by DEFORM 2D. To obtain a flow stress data and optimal forging temperature is carried out hot compression and tensile test at a various temperature range. Developed product is tested mechanical properties of elongation, hardness and tensile strength so on. Test results are presented excellent mechanical properties.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.528-532
• /
• 1987

Closed-loop fiber-optic gyroscope with linear scale factor for a wide dynamic range is demonstrated using a gating process and two-harmonic phase modulation, of which the second harmonic is obtained by a frequency doubler. Also the effects of the second harmonic and duty cycle of gating signal on the linearity of scale factor are estimated theoretically and compared with the measured data. The experimental results show the best linearity of scale factor is about 0.5% within the rotation rate 90.deg./sec. The closed-loop fiber-optic gyroscope with gated two-harmonic phase modulation can be used in the application demanding less sensitive performance and modest scale factor linearity.

• 태양에너지
• /
• 제19권1호
• /
• pp.9-17
• /
• 1999

An Experimental study on the boiling and condensation heat transfer performance of thermosyphons with low intergral-fins was performed to investigate its heat transfer characteristics. A plain thermo syphon having the same inner and outer diameter as the finned thermosyphons was also tested for comparison. Water and CFC-30 was used as working fluids. The experimental results have been assessed and compared with same existing theories. Good agreement with the theories of Imura and Nusselt was obtained. The vertical closed-type thermosyphons with low integral-fins gave significant increases in the overall heat transfer coefficient compared to plain thermosyphon. In addition, the overall heat transfer coefficients and the operating characteristics was obtained as a function vof operating temperature for the practical applications. Also, the closed two-phase thermosyphons with low integral-fins would be highly recommended to achieve some inexpensive and compact heat exchangers in the range of low temperatures.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1732-1739
• /
• 2017

This paper presents a sensorless vector control algorithm of closed loop Gopinath flux observer to enhance the robustness at low speed by switching P/PI mode. Closed loop Gopinath flux observer has the problem in sensorless vector control of induction motor at low speed. This paper solves the problem using the characteristic function of closed loop Gopinath flux observer. P mode shows better performance than PI mode under the cut-off frequency of observer. But P mode always has a flux error due to DC offset, so this paper combines P mode and PI mode. This algorithm shows good performance over wide speed range. The performance has been confirmed through computer simulations using MATLAB SIMULINK and experiments.

• 한국지형학회지
• /
• 제25권4호
• /
• pp.1-19
• /
• 2018

This study tries to identify distributional characteristics of stream incision rates at 23 points in the northern part of the Taebaek Mountains. Soyang-gang, Naerin-cheon, Odae-cheon, Dong-gang and upper reaches of Okdong-cheon Rivers closed to the Range show higher incision rates and the rates clearly decrease with distance from the Range. Therefore, the incision process in the northern part of the Range has been greatly influenced by uplift around the Range, and the Sobaek Mountain Range seem to play a role in the incision process. Limestone areas show lower incision rates due to degradation of terrace surface by dissolution. This study suggests that local hydrological, geological and geomorphological conditions can be regarded as an important factor in stream incision rates, although stream incision rates are greatly influenced by regional uplift.

• 소성∙가공
• /
• 제22권5호
• /
• pp.269-274
• /
• 2013

Experiments and numerical simulations of the incremental upsetting test were carried out to investigate void closure behavior and mechanical characteristic of a 1.5wt%C ultra-high carbon steel. The experimental results showed that the voids become quickly smaller as the reduction ratio increases. The simulation results confirmed this behavior and indicated that the voids were completely closed at a reduction ratio of about 40~45% during incremental upsetting. After the completion of the incremental upsetting tests, the process of diffusion bonding was employed to heal the closed voids in the deformed specimens. To check the appropriate temperature for diffusion bonding, deformed specimens were kept at 800, 900, 1000 and $1100^{\circ}C$ for an hour. In order to investigate the effect of holding time for diffusion bonding at $1100^{\circ}C$, specimens were kept at 10, 20, 30, 40, 50 and 60minutes in the furnace. A distinction between closed and healed voids was clearly established using microstructural observations. In addition, subsequent tensile tests demonstrated that complete healing of a closed void was achieved for diffusion bonding temperatures in the range $900{\sim}1100^{\circ}C$ with a holding time larger than 1 hour.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.90-97
• /
• 1991

본 연구에서는 하이브리드 스텝핑 모터의 공진 배제를 위한 폐회로제어시스템 을 개발하였고 펄스 발생, 위치 및 속도변화, 가감속제어, 정여괴전방향결정, 카운트 및 스텝핑 모터의 온/오프기능 등을 하드웨어 대신 마이크로컴퓨터를 이용한 소프트웨 어로 대치하였으며, 구동회로의 복잡함을 피하기 위해 스텝핑 모터의 전용제어기인 PMM8713IC를 사용하였고 궤환정보는 샤프트 엔코더를 사용하였다.그리고 리드 스크 루우를 사용한 1축 테이블을 제작하여 개회로제어시와 폐회로제어시의 동특성 및 공진 현상을 검토하였다.

• 한국전자통신학회논문지
• /
• 제10권4호
• /
• pp.507-512
• /
• 2015

거리 측정정보를 사용하는 무선위치추정시스템에서 추정기법으로 반복기법기반 근사해를 주로 많이 사용하고 있으나 지역최소문제 및 계산량을 고려해 대안으로 선형 닫힌 형태의 해가 연구되어 왔다. 그러나 각 닫힌 형태의 해는 별도의 특성을 가진 오차요인을 갖고 있으며 이 문제로 인해 그 사용이 제한되기도 한다. 본 논문에서는 대표적인 두 닫힌 형태의 해를 융합하여 각 해가 갖는 오차요인을 서로 상쇄시키는 기법을 제안한다. 두 해를 융합하기 위한 가중치를 각 오차요인이 갖는 오차 특성 기반 퍼지 기법으로 결정하는 방법을 사용한다. 제안된 기법의 성능은 시뮬레이션 기반으로 검증한다.

• Journal of Oral Medicine and Pain
• /
• 제15권1호
• /
• pp.79-89
• /
• 1991

The author examined the patterns and various ranges of mandibular movements in TMJ lock closed patients in the frontal, sagittal and horizontal plane and obtained the following results. 1. In the frontal trajectory, the mean amount of maximum mouth opening was 24.4mm and the opening paths were deviated to the affected side in 87.1% of the patients. The mean amount of maximum laterotrusion to the affected side was 10.4mm and that of non-affected side was 7.5mm. There was a significant difference between them(p<0.001). 2. In the sagittal trajectory, the mean amount of the maximum protrusion was 7.0mm, the mean amount of the maximal retrusion was 1.0mm 3. In the horizontal trajectory, the pattern of laterotrusion showed asymmetry: the mean length of non-affected side was smaller than that of the affected side. Protrusive path were deviated to the affected side in 64.5% of the patients, the mean degree of deviation was 16.4$^{\circ}$. The mandibular movements of TMJ lock-closed patients can be characterized by decreased range of mouth opening, protrusive movement, and laterotrusive movement to the non-affected side and also characterized by deviated opening and protrusive path to the affected side.

• Journal of Trauma and Injury
• /
• 제37권1호
• /
• pp.6-12
• /
• 2024

Purpose: Open pelvic bone fractures are relatively rare and are considered more severe than closed fractures. This study aimed to compare the clinical outcomes of open and closed severe pelvic bone fractures. Methods: Patients with severe pelvic bone fractures (pelvic Abbreviated Injury Scale score, ≥4) admitted at a single level I trauma center between 2016 and 2020 were retrospectively analyzed. Patients aged <16 years and those with incomplete medical records were excluded from the study. The patients were divided into open and closed fracture groups, and their demographics, treatment, and clinical outcomes were compared before and after 1:2 propensity score matching. Results: Of the 321 patients, 24 were in the open fracture group and 297 were in the closed fracture group. The open fracture group had more infections (37.5% vs. 5.7%, P<0.001) and longer stays in the intensive care unit (median 11 days, interquartile range [IQR] 6-30 days vs. median 5 days, IQR 2-13 days; P=0.005), but mortality did not show a statistically significant difference (20.8% vs. 15.5%, P=0.559) before matching. After 1:2 propensity score matching, the infection rate was significantly higher in the open fracture group (37.5% vs. 6.3%, P=0.002), whereas the length of intensive care unit stay (median 11 days, IQR 6-30 days vs. median 8 days, IQR 4-19 days; P=0.312) and mortality (20.8% vs. 27.1%, P=0.564) were not significantly different. Conclusions: The open pelvic fracture group had more infections than the closed pelvic fracture group, but mortality was not significantly different. Aggressive treatment of pelvic bone fractures is important regardless of the fracture type, and efforts to reduce infection are important in open pelvic bone fractures.