• 소성∙가공
• /
• 제12권4호
• /
• pp.296-301
• /
• 2003

Though a glass tens has outstanding optical performance, it has not been widely used because manufacturing process shows poor productivity and high cost. However, press-forming method of glass lens overcomes these disadvantages with mass production. When glass lens is produced by press-forming method using closed die, it is needed that the volume of glass lens preform is precisely measured in order to prevent incomplete products and to increase in life of die. The present. paper shows the shortcoming of forming process with closed die, and performs FEM simulation of forming process with open die in order to overcome this shortcoming. The design parameters of open die are selected on the basis of assembly with optical module and maintenance of optical performance. FEM simulation is carried out with selected parameter of open die and two basic preform. According to distribution of effective strain in glass lens, optical property of glass lens formed at each set of die and preform is compared.

• 소성∙가공
• /
• 제12권5호
• /
• pp.457-464
• /
• 2003

In the powder compact melting technique, proper precursor fabrication is very important because density distribution after foaming and foamability are determined during precursor fabrication process. The fabrication of the precursor has to be performed very carefully because any residual porosity or other defects will lead to poor results in further processing. In order to evaluate the effect of the compaction parameters on the kinetics of the foaming process, a series of experiments were performed. In this study, aluminium foams with a closed cell structure were fabricated by using both the powder compact method and the induction heating process. A proper induction coil was designed to obtain a uniform temperature distribution over the entire cross sectional area of precursor. To establish the foamable precursor fabrication conditions, effects of process parameters such as the titanium hydride content (0.3∼1.5 wt.%), pressing pressure of the foamable precursor (50∼150kN) on the pore morphology were investigated.

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.60-65
• /
• 2022

In the pultrusion process for the CFRP (Carbon fiber reinforced plastic) rectangular pipe, the drawing device is eseential which can continuously produces products and draws the carbon fiber tow. In addition, since the degree of cure changes depending on the temperature and the temperature ditribution of the curing mold changes depending on the pultrusion speed, the temperature distribution of the curing mold under certain conditions must be studied before processing. In this study, in the pultrusion process using a closed impregnation method, which has several advantages compared to the general pultrusion process using a open bath impregnation method, the drawing force required to pull the carbon fiber tows and the temperature distribution of the curing mold was analyzed to design the drawing device and the curing mold efficiently.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1276-1277
• /
• 2006

The ever increasing requirements on today's compacts with regard to their geometry and precision call for flexible high-precision and most capable production systems. DORST Technologies has coped with these requirements by developing the new HP series for pressing forces between 1600 kN and 16000 kN and the new HS series for pressing forces between 150 kN and 1200 kN. These fully hydraulic presses featuring upper ram, lower ram, core rod, filler, up to 4 lower tool levels and up to 4 upper tool levels with closed-loop controlled movements. Thanks to latest servo technology and an electronic bus system it is possible to have all movements closed-loop controlled in the desired relation to each other. Thus, today's hydraulic presses provide high stroke rates, low energy consumption and a user-friendly interface. The input of data is carried out via clearly arranged screen masks on a touch-screen. The innovative DORST $IPG^{(R)}$ (Intelligent Program Generator) has been designed to support the set-up staff in preparing and optimizing the toolprogram. The combination of the machine type with the hydraulic unit determines the productivity in consideration of the specific application and the part to be pressed. Thanks to the closed-loop control circuits, DORST hydraulic automatic presses of the latest generation ensure unmatched precision and repeatability - and consequently process reliability - often without necessitating subsequent machining steps.

• 한국추진공학회지
• /
• 제19권4호
• /
• pp.8-14
• /
• 2015

Purdue 대학교의 Ismailov 등이 수행한 closed-type 스월 인젝터의 동특성에 대한 모델링 및 계산 결과를 실험을 통해 확인하고자 하는 과정의 일환으로 수행된 연구이다. Closed-type 스월 인젝터의 스월 챔버의 길이와 지름의 영향이 인젝터의 동특성에 미치는 영향을 관찰하고자 스월 챔버의 길이와 지름을 변화시킬 수 있는 인젝터를 제작하였다. 이러한 과정에서 closed-type 스월 인젝터의 동특성에 대한 실험을 진행하기에 앞서서 정적인 분무 특성을 확인하였다. 인젝터 전단에 설치된 유량계를 통하여 유량을 확인하였으며, Lefebvre의 방식에 따라 closed-type 스월 인젝터의 오리피스에 전극을 설치하여 매니폴드 압력에 따른 액막 두께의 변화를 측정하였다. 또한 압력별로 촬영된 순간적인 분무 사진을 통하여 매니폴드 압력에 따른 분사각과 분열길이의 변화를 관찰하였다.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.1939-1946
• /
• 2009

현대의 기업은 급변하는 비즈니스 환경에 맞는 응용 프로그램을 적시에 개발이 필요하다. 그러나 대부분의 기업들은 비즈니스 프로세스 개념 없이 애플리케이션을 개발하여 업무 변경 시, 필요한 응용프로그램을 적시에 개발하기 어렵다. 이를 해결하기 위해 클로즈 아키텍처 기반의 비즈니스 프로세스 프레임워크 제안한다. 이는 BPM(Business Process Model)과 SOA(Service Oriented Architecture), 그리고 CBD(Component Based Development) 접목을 통해 급변하는 비즈니스 프로세스 변경/개선이 용이하며, 이를 지원하는 응용프로그램을 재사용을 통해 적시에 개발하고 자 한다. 본 논문에서는 비즈니스 프로세스 프레임워크 내에 5-Layer 구조 및 그에 따른 BNF(Backus Naur Form)을 정의하였다.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.9-14
• /
• 2012

Currently a variety of efforts to conserve and restore the injured the Annal of the Joseon Dynasty are continued and many studies about the aging pathway of the beeswax-treated volume have being progressed. In this study, two chambers were set up to assess the influence of VOCs(Volatile Organic Compounds) generated in process of beeswax deterioration. One chamber was closed and the other was continuously ventilated in order to remove the VOCs. In results, the acid compounds of beeswax-treated Hanjis aged in closed chamber was more than that aged in ventilated chamber. The folding endurance of beeswax-treated Hanjis aged in closed chamber was lower than that aged in ventilated chamber. Accumulated acid compounds of beeswax-treated Hanji in closed chamber may cause accelerated aging and strength decrease. In conclusion, accumulated acid compounds can accelerate the aging of beeswax-treated Hanji and cause the severe deterioration of inside of beeswax-treated volume. Therefore, to preserve more safely beeswax-treated volumes of the Annals of the Joseon Dynasty, it is essential that VOCs emitted from beeswax-treated volume are ventilated.

• 한국디지털건축인테리어학회논문집
• /
• 제10권3호
• /
• pp.39-46
• /
• 2010

Recently, in rural areas have been occurred closed school due to reduce children of people who consider educational environment. In July 2009 statistic, Closed school are ut to 3,348; sale process(61%), lease(25%), neglect(14%). Closed school are not only local community education, but also to act as cultural and historical role. First of all, it will be utilized public facilities as well as welfare facilities for local residents. In this study suggests the welfare facility where is remodelled as good case so that it will use as a data when closed school need remodeling. The main contents is as follows; it is set the slope next to the school building, a classroom is remodelled 2 triple rooms which are installed Ondol and a toilet, teacher's room is converted into the canteen, corridors are converted into the kitchen. Having good condition in the area, close school is appropriate to use welfare facility and also effective to convert teacher's space into normal space, canteen, kitchen. Finally, developed 2~5 composition type of elderly facility.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.490-499
• /
• 1989

본 연구에서의 CO$_{2}$ 프로세스는 1차 루프인 원자로에서 유도되는 나트륨 과 2차 루프인 CO$_{2}$ 가스터빈 사이클로 구성하였고, CO$_{2}$ 임계점 부근에서 압축을 행하였다. 또한 최적의 사이클을 결정하기 위해 h-s 선도와 이에 대한 열역 학적, 칼로리로 유도하였다. 그리고 최적화를 위해 출력을 각각 300,600, 1000MWe로 선택하였고, 터빈 입구압은 150-350bar의 범위로 선택하였으며 이들로부터 열효율에 영향을 주는 각 설계변수의 특성을 연구 분석하였다.

• 교육녹색환경연구
• /
• 제10권3호
• /
• pp.27-35
• /
• 2011

This study is processing to analyze the causes and to suggest the solution about extension of closed schools which comes from urban decay in the city. The meaning of this report is based on the purpose to help the substantial application of the equipments of closed schools. This is used by groping the composite application scheme for improving the values of recycling facilities of closed schools which is according to abolition and amalgamation. To complete the purpose of this report, many documents, records and corroborative evidences were used to process this study. We suggest the program that is available to invest space. That is analyzed the environment and the social application that the building has is proper or not.