• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.1-14
• /
• 2019

A full scale hydrodynamic simulation that requires an accurate reproduction of shock-induced detonation was conducted for design of an energetic component system. A detailed hydrodynamic analysis SW was developed to validate the reactive flow model for predicting the shock propagation in a train configuration and to quantify the shock sensitivity of the energetic materials. The pyrotechnic device is composed of four main components, namely a donor unit (HNS+HMX), a bulkhead (STS), an acceptor explosive (RDX), and a propellant (BPN) for gas generation. The pressurized gases generated from the burning propellant were purged into a 10 cc release chamber for study of the inherent oscillatory flow induced by the interferences between shock and rarefaction waves. The pressure fluctuations measured from experiment and calculation were investigated to further validate the peculiar peak at specific characteristic frequency (${\omega}_c=8.3kHz$). In this paper, a step-by-step numerical description of detonation of high explosive components, deflagration of propellant component, and deformation of metal component is given in order to facilitate the proper implementation of the outlined formulation into a shock physics code for a full scale hydrodynamic simulation of the energetic component system.

• Journal of The Korean Association of Information Education
• /
• v.23 no.2
• /
• pp.131-139
• /
• 2019

From 2019, software education has become a required subject for all elementary school students. However, many teachers are still unfamiliar with how the classes should be instructed. So this paper presented the meaning, detailed competencies and achievement standard in order to help in the collection, analysis and representation of data among the computational thinking that are key to software education. And it also suggested the applicability of the classes. The full course of the paper is summarized as follows. First, existing studies have summarized the meaning, detail and achievement standard of data related competencies. Based on this, a preliminary investigation was instructed. Pilot study carried out both FGI and closed questions at the same time. This was done in response to the survey's questionnaire reflecting the opinions of experts. Second, the results of the questionnaire generated as a result of the above were verified for validity, stability, and reliability among the PhD, PhD courses, software education teachers, and software education workers. Third, I developed and applied the five lessons as a class objective as 'Choosing collection method-Select the collection method according to the problem situation.', 'Searching for meaning of data-Understand what the analyzed data mean..', 'Using various expression methods-Use a variety of expression tools.' using the backward design model to integrate education, class, and assessment. As a result, the detailed competencies of data collection, analysis, and representation and achievement standard were presented. This may help in setting specific and specific criteria for what direction classes are recommended when planning data-related classes in elementary schools.

• Journal of Korean Classical Literature and Education
• /
• no.16
• /
• pp.273-296
• /
• 2008

The author analyzed the psychological factors which affected on the way of Mrs. Park in the became a virtuous woman and compared these psychological factors with a virtuous women in Samganghaengsildo based on the relationship between Mrs. Park in and Samganghaengsildo's the virtuous women volume. First of all, it's about the power of authority on women. The volume of Samganghaengsildo's virtuous women was about the group of women who were recognized as virtuous women by the king who had absolute power at the time period. The volume of Samganghaengsildo's virtuous women was very well known for women. This book had a huge impact on women since the government authority educated the women using this book. In addition, the incredible events which were written in Samganghaengsildo indicated that the behavior of virtue was the right thing to follow since even super power recognized it as a good thing to do and the woman might be punished when she didn't follow the behavior of virtue. Second, it was based on the similarity of circumstance and uncertainty for the future. Mrs. Park in showed similar behavioral patterns with a virtuous woman in Samganghaengsildo since she took her role model from the virtuous woman. When Mrs. Park lost her husband, she was not sure about her future and the volume of Samganghaengsildo pointed out that there was another world after the death and she would meet her husband again after the death. In addition, the incorrect information that she would feel better psychologically when she followed her dead husband instead of living herself. Third, it is about the resemblance of obsessive mind and self internalization. The examination of the record of Mrs. Park showed that Mrs. Park tried to internalize integrity, loyalty, and virtue of virtuous women in Samganghaengsildo and became herself like virtuous women. In addition, the woman's obsessive mindset remarkly reflected in Samganghaengsildo. For instance, Mrs. Park in held to the time of death of her husband and the writer who wrote about the behavior of Mrs. Park also emphasized that the time of death of Mrs. Park was closed to the time of the death of her husband. This explained that the obsessive mindset of women in the epic of virtue women could have influence on the women's mind who tried to show the similar behavior with a virtue woman and internalize it. Finally, the people of the day also were not free from it.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.111-124
• /
• 2021

Recently, Interest in the restoration and 3D reconstruction of cultural properties due to the fire of Notre Dame Cathedral on April 15, 2019 has been focused once again after the 2008 Sungnyemun fire incident in South Korea. In particular, research to restore and reconstruct the actual measurement of cultural properties using LiDAR(Light Detection and ranging) and conventional surveying, which were previously used, using various 3D reconstruction technologies, is being actively conducted. This study acquires data using unmanned aerial imagery of UAV(Unmanned Aerial Vehicle), which has recently established itself as a core technology in the era of the 4th industrial revolution, and the existing CRP(Closed Range Photogrammetry) and terrestrial LiDAR scanning for the Recumbent Buddha of Unju Temple. Then, the 3D reconstruction was performed with three fusion models based on SfM(Structure-from-Motion), and the reproducibility and accuracy of the models were compared and analyzed. In addition, using the best fusion model among the three models, the relationship with the Polar Star(Polaris) was confirmed based on the real world coordinates of the Recumbent Buddha, which contains the astronomical history of Buddhism in the early 11th century Goryeo Dynasty. Through this study, not only the simple external 3D reconstruction of cultural properties, but also the method of reconstructing the historical evidence according to the type and shape of the cultural properties was sought by confirming the historical evidence of the cultural properties in terms of spatial information.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1615-1627
• /
• 2020

The purpose of this study is to compare and analyze the performance of KOMPSAT-3 Digital Surface Model (DSM) made in overseas testbed area. To that end, we collected the KOMPSAT-3 in-track stereo image taken in San Francisco, the U.S. The stereo geometry elements (B/H, converse angle, etc.) of the stereo image taken were all found to be in the stable range. By applying precise sensor modeling using Ground Control Point (GCP) and DSM automatic generation technique, DSM with 1 m resolution was produced. Reference materials for evaluation and calibration are ground points with accuracy within 0.01 m from Compass Data Inc., 1 m resolution Elevation 1-DSM produced by Airbus. The precision sensor modeling accuracy of KOMPSAT-3 was within 0.5 m (RMSE) in horizontal and vertical directions. When the difference map was written between the generated DSM and the reference DSM, the mean and standard deviation were 0.61 m and 5.25 m respectively, but in some areas, they showed a large difference of more than 100 m. These areas appeared mainly in closed areas where high-rise buildings were concentrated. If KOMPSAT-3 tri-stereo images are used and various post-processing techniques are developed, it will be possible to produce DSM with more improved quality.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.34-39
• /
• 2023

Growth modeling in plant factories can not only control stable production and yield, but also control environmental conditions by considering the relationship between environmental factors and plant growth rate. In this study, using the expolinear function, we modeled perilla [Perilla frutescens (L.) Britt.] cultivated in a plant factory. Perilla growth was investigated 12 times until flower bud differentiation occurred after planting under light intensity, photoperiod, and the ratio of mixed light conditions of 130 μmol·m^-2·s^-1, 12/12 h, red:green:blue (7:1:2), respectively. Additionally, modeling was performed to predict dry and fresh weights using the expolinear function. Fresh and dry weights were strongly positively correlated (r = 0.996). Except for dry weight, fresh weight showed a high positive correlation with leaf area, followed by plant height, number of leaves, number of nodes, leaf length, and leaf width. When the number of days after transplanting, leaf area, and plant height were used as independent variables for growth prediction, leaf area was found to be an appropriate independent variable for growth prediction. However, additional destructive or non-destructive methods for predicting growth should be considered. In this study, we created a growth model formula to predict perilla growth in plant factories.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4A
• /
• pp.337-342
• /
• 2010

Generally most sluice gates are closed and opened by a mechanical winch, a winch using an oil-pressure, or a winch mixing both. Because of their size and structure, they should be safely operated with more than two pulling devices helping each other. At the moment of their opening and closing, there usually occur some additional loads to the structure which cannot be exactly measurable at the stage of designing. Such additional loads can cause the sluice gate to be unbalanced and make it hard to open and close the gate, and by also overloading a winch, they can inflict a significant damage to the safety of the sluice gate. This paper explains a FDC(Force-Displacement Control) system which simultaneously considered the oil-pressure and displacement in order to evenly distribute the force and make a winch balanced at the opening and closing motion. This FDC system was implemented by means of the PID(Proportional Integral Derivative) function of XG 5000 program. It was experimented on a model of the sluice gate winch with the hydraulic oil pressure cylinder. The experiments showed that the developed FDC system made the winch of hydraulic oil pressure cylinder open and close cooperatively in spite of various external loads. Therefore the FDC system is proven effective when it is applied to a winch of sluice gate.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.27-35
• /
• 2024

Fuel gases such as methane and propane are used in explosion hazardous area of domestic plants and can form non-uniform mixtures with the influence of process conditions due to leakage. The fire-explosion risk assessment using literature data measured under uniform mixtures, damage prediction can be obtained the different results from actual explosion accidents by gas leaks. An explosion characteristics such as explosion pressure and flame velocity of non-uniform gas mixtures with concentration change similar to that of facility leak were examined. The experiments were conducted in a closed 0.82 m long stainless steel duct with observation recorded by color high speed camera and piezo pressure sensor. Also we proposed the quantification method of non-uniform mixtures from a regression analysis model on the change of concentration difference with time in explosion duct. For the non-uniform condition of this study, the area of flame surface enlarged with increasing the concentration non-uniform in the flame propagation of methane and was similar to the wrinkled flame structure existing in a turbulent flame. The time to peak pressure of methane decreased as the non-uniform increased and the explosion pressure increased with increasing the non-uniform. The ranges of K_G (Deflagration index) of methane with the concentration non-uniform were 1.30 to 1.58 [MPa·m/s] and the increase rate of K_G was 17.7% in methane with changing from uniform to non-uniform.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.269-276
• /
• 2009

Radiation treatment techniques using photon beam such as three-dimensional conformal radiation therapy (3D-CRT) as well as intensity modulated radiotherapy treatment (IMRT) demand accurate dose calculation in order to increase target coverage and spare healthy tissue. Both jaw collimator and multi-leaf collimators (MLCs) for photon beams have been used to achieve such goals. In the Pinnacle3 treatment planning system (TPS), which we are using in our clinics, a set of model parameters like jaw collimator transmission factor (JTF) and MLC transmission factor (MLCTF) are determined from the measured data because it is using a model-based photon dose algorithm. However, model parameters obtained by this auto-modeling process can be different from those by direct measurement, which can have a dosimetric effect on the dose distribution. In this paper we estimated JTF and MLCTF obtained by the auto-modeling process in the Pinnacle3 TPS. At first, we obtained JTF and MLCTF by direct measurement, which were the ratio of the output at the reference depth under the closed jaw collimator (MLCs for MLCTF) to that at the same depth with the field size $10{\times}10\;cm^2$ in the water phantom. And then JTF and MLCTF were also obtained by auto-modeling process. And we evaluated the dose difference through phantom and patient study in the 3D-CRT plan. For direct measurement, JTF was 0.001966 for 6 MV and 0.002971 for 10 MV, and MLCTF was 0.01657 for 6 MV and 0.01925 for 10 MV. On the other hand, for auto-modeling process, JTF was 0.001983 for 6 MV and 0.010431 for 10 MV, and MLCTF was 0.00188 for 6 MV and 0.00453 for 10 MV. JTF and MLCTF by direct measurement were very different from those by auto-modeling process and even more reasonable considering each beam quality of 6 MV and 10 MV. These different parameters affect the dose in the low-dose region. Since the wrong estimation of JTF and MLCTF can lead some dosimetric error, comparison of direct measurement and auto-modeling of JTF and MLCTF would be helpful during the beam commissioning.

• Asia pacific journal of information systems
• /
• v.23 no.3
• /
• pp.1-23
• /
• 2013

Open Source Software Development (OSSD) differentiates itself from traditional closed software development in that it reveals its source codes online and allows anyone to participate in projects. Even though its success was in doubt, many of the open collaborative working models produced successful results. Academia started to get interested in how developers are willing to participate even when there are no extrinsic rewards for their efforts. Many studies tried to explain developers' motivations, and the pursuit of ideology, reputation, and altruism are found to be the answers. Those studies, however, focused mostly on how the first contribution is made out of a certain motivation. Nowadays, OSSD reaches at its maturity and 70% of professional developers have used or utilized open source software or code in their works. As the proportion of people experiencing OSS, the accounts from previous studies are expected to be weakened. Also, extant literature fails to explain how the motivation of participating in OSS evolves over time and experiences. Given that changing over time or over experiences is the natural in the perception of motivation, studies in an attempt to understand how the motivation changes or evolves are in need. In this study, we aimed to explain how the perception about OSS from past usage or related experiences leads to the intention to sustain OSS participations. By doing so, we try to bridge the gap between previous studies and the actual phenomenon. We argued that perceived instrumentality about OSS learned from past experiences will first affect the formation of organizational identity towards general OSS community. And once the organizational identity is formed, it will affect the one's following behaviors related to OSS development, most likely to sustain the favoring stance toward OSS community. Our research distinguishes itself from previous one in that it divides the paths from organizational identity formed to the intention to sustain the voluntary helping behaviors, by altruistic and conforming intentions. Drawing on this structural model, we could explain how organizational identity engages in forming the sustaining intention from past experiences, and that the intention to help at individual level and organizational level works at different level in OSS community. We grounded our arguments on Social identity theory and Organizational Citizenship theory. We examined our assumption by constructing a structural equation model (SEM) and had 88 developers to answer our online surveys. The result is analyzed by PLS (partial least square) method. Consequently, all paths but one in our model are supported, the one which assumed the association between perceived instrumentality and altruistic intention. Our results provide directions in designing online collaborative platforms where open access collaboration is meant to occur. Theoretically, our study suggests that organizational citizenship behavior can occur from organizational identity, even in bottom-up organizational settings. More specifically, we also argue to consider both organizational level and individual level of motivation in inducing sustained participations within the platforms. Our result can be interpreted to indicate the importance of forming organizational identity in sustaining the participatory behaviors. It is because there was no direct association between perceived instrumentality from past experiences and altruistic behavior, but the perception of organizational identity bridges the two constructs. This means that people with no organizational identity can sustain their participations through conforming intention from only the perception of instrumentality, but it needs little more than that for the people to feel the intention to directly help someone in the community-first to form the self-identity as a member of the given community.