• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1747-1751
• /
• 2000

It is well known that acoustic signals, even measured in an anechoic chamber, can be contaminated due to the wall interference. Therefore, it is necessary to reconstruct the original signal from the measured data, which is very critical for the case of measurement of source signal in a water tunnel. In this thesis, new methods for the reconstruction of sound sources are proposed and validated by using Boundary Element Method from measured data in a closed space. The inverse Helmholtz integral equation and its normal derivative are used for the reconstruction of sound sources in a closed space. An arbitrary Kirchhoff surface over the sources is proposed to solve the surface information instead of direct solution for the source. Although sound sources are not directly known by the inverse Helmholtz equation, the original sound source of pressure-field outside of the wall can be indirectly obtained by using this new method.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.737-738
• /
• 2010

러시아의 액체로켓엔진 개발과정과 특징을 살펴보았다. 1960년대에는 closed cycle을 채용하여 연소압과 비추력을 최대한 높이려고 노력하였으며, 근래에는 기존 개발 부품의 이용과 최적화된 시험-개선과정으로 엔진개발비용을 최소화하고, 시장확대를 위한 활발한 국제협력을 진행하고 있다.

• Journal of Chest Surgery
• /
• 제20권1호
• /
• pp.202-208
• /
• 1987

Congenital coronary artery fistula is a rare condition, and with widespread use of cardiac catheterization, angiography and selective coronary arteriography are being recognized with increasing frequency. Fistula originating from the right coronary artery are more common then those from the left coronary artery. The fistula empties into the right side of the heart in 90% of the cases with the right ventricle being the most common recipient chamber followed by the right atrium and the pulmonary artery. Recently we experienced two cases of congenital coronary artery fistula which originated from the left coronary artery each other. The first case was 17 moth-old-male, who have had the symptoms of frequent URI, dyspnea and continuous murmur in physical examination. The fistulous communication was noted between the left circumflex coronary artery and the right ventricle with aneurysmal dilation of RV wall. The proximal opening of the fistulous tract was directly close with partial aneurysmorrhaphy of RV wall. Also the termination site of fistulous tract in RV chamber was closed. The second case was 35-year-old female, who have had the symptom of exertional dyspnea and continuous murmur in physical examination. The tortuous and dilated fistulous tract was noted between the left anterior descending coronary artery and the pulmonary artery. The proximal opening of the fistula was ligated near the left anterior descending coronary artery with preservation of normal continuity of coronary artery. And the dilated tortuous vessel was excised. Also the terminal site in pulmonary artery was directly closed just above the pulmonic valve. Postoperative hospital courses of two patients were uneventful without any specific complications and discharged without problems.

• 한국전산구조공학회논문집
• /
• 제16권3호
• /
• pp.219-228
• /
• 2003

강관이 매설되어 있는 폐쇄형 시스템에서 동결된 화강토의 온도분포에 관한 수치해석 및 실험적 연구가 수행되었다. 실험을 통해 측정된 부동수분량의 온도상관식을 제시하였으며, Lachenbruch의 열전도율 식을 사용하여 열전도율 측정값을 비교·분석하였다. 원형 단면 강관이 매설된 모형토조의 동결챔버를 제작하여 동결토의 온도를 측정하고 유한요소 수치해석을 수행하여 실험 결과와 비교하였다. 수치해석시 동결된 화강토의 잠열효과가 고려되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.251-254
• /
• 2001

In this paper, we analyzed the properties change of electric wire when the thermal stress was applied to NFR-8 and FR-PVC 600[V] wire. Messurement is made of the attenuation of a light beam by smoke accumulating with in a closed chamber due to nonflaming pyrolytic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometrical factor and the measured optical density a measurement characteristic of the concentration of smoke. Referenced documents were ASTM E662 standard test method for specific Ds genalated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of $2.5{\pm}0.04[w/cm^{2}]$ for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 25.2 to 37.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. The amount of carbon monoxide generated was found to be much higher in FR-PVC decomposition than in NFR-8 due to incomplete combustion of FR-PVC which has high content of carbon in compound.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.251-254
• /
• 2001

In this paper, we analysed the properties change of electric wire when the thermal stress was applied to NFR-8 and FR-PVC [600] wire. Measurement is made of the attenuation of a light beam by smoke accumulating with in a closed chamber due to nonflamining pyrolytic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometrical factor and the measured optical density a measurement characteristic of the concentration of smoke. Referenced documents were ASTM E662 standard test method for specific Ds generated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of 2.5${\pm}$0.04[w/$\textrm{cm}^2$] for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 7.2 to 77.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. The amount of carbon monoxide generated was found to be much higher in FR-PVC decomposition than in NFR-8 due to incomp1ete combustion of FR-PVC which has high content of carbon in compound.

• Journal of Ecology and Environment
• /
• 제42권4호
• /
• pp.272-277
• /
• 2018

Background: Studying the ecosystem carbon cycle requires analysis of interrelationships between soil respiration (Rs) and the environment to evaluate the balance. Various methods and instruments have been used to measure Rs. The closed chamber method, which is currently widely used to determine Rs, creates a closed space on the soil surface, measures $CO_2$ concentration in the inner space, and calculates Rs from the increase. Accordingly, the method is divided into automatic or manual chamber methods (ACM and MCM, respectively). However, errors of these methods and differences in instruments are unclear. Therefore, we evaluated the characteristics and difference of Rs values calculated using both methods with actual data. Results: Both methods determined seasonal variation patterns of Rs, reflecting overall changes in soil temperature (Ts). ACM clearly showed detailed changes in Rs, but MCM did not, because such small changes are unknown as Rs values are collected monthly. Additionally, Rs measured using MCM was higher than that using ACM and differed depending on measured plots, but showed similar tendencies with all measurement times and plots. Contrastingly, MCM Rs values in August for plot 4 were very high compared with ACM Rs values because of soil disturbances that easily occur during MCM measurements. Comparing Rs values calculated using monthly means with those calculated using MCM, the ACM calculated values for monthly averages were higher or lower than those of similar measurement times using the MCM. The difference between the ACM and MCM was attributed to greater or lesser differences. These Rs values estimated the carbon released into the atmosphere during measurement periods to be approximately 57% higher with MCM than with ACM, at 5.1 and $7.9C\;ton\;ha^{-1}$, respectively. Conclusion: ACM calculated average values based on various Rs values as high and low for measurement periods, but the MCM produced only specific values for measurement times as representative values. Therefore, MCM may exhibit large errors in selection differences during Rs measurements. Therefore, to reduce this error using MCM, the time and frequency of measurement should be set to obtain Rs under various environmental conditions. Contrastingly, the MCM measurement is obtained during $CO_2$ evaluation in the soil owing to soil disturbance caused by measuring equipment, so close attention should be paid to measurements. This is because the measurement process is disturbed by high $CO_2$ soil concentration, and even small soil disturbances could release high levels into the chamber, causing large Rs errors. Therefore, the MCM should be adequately mastered before using the device to measure Rs.

• 대한토목학회논문집
• /
• 제33권6호
• /
• pp.2317-2328
• /
• 2013

이 연구에서는 수리모형실험을 통해 유수실 상부 덮개가 유공 케이슨 방파제 전면벽 및 후면벽에서의 파압에 미치는 영향을 고찰하였다. 수리모형실험은 유공 케이슨의 유수실 상부 덮개가 있는 경우 및 없는 경우에 대해서 전면벽 유공률을 변화시키면서 이루어졌다. 유수실 상부가 덮개로 막혀 있을 때에는 모든 실험 조건에서 유의미하게 더 큰 파압이 취득되었으며 따라서 유수실 상부 덮개 존재에 따른 두 벽에서의 계측 파압 차이는 매우 뚜렷하게 나타났다. 그 결과 계측 파압을 적분하여 계산된 전파력의 크기 역시 상부 덮개가 있는 케이슨 방파제의 경우가 더 컸으며, 이 경우 잘 알려진 Takahashi의 파압식에 근거한 파력값을 상회하였다. 한편, 전면벽 유공률에 따라서는 방파제 전면벽 및 후면벽에서 모두 유공률이 클수록 더 큰 파압이 계측되었다.

• 한국농림기상학회지
• /
• 제5권2호
• /
• pp.94-100
• /
• 2003

토양으로부터의 $CO_2$ 방출은 생태계의 탄소 순환에 중요한 위치를 차지한다. 주요 생태계의 순 $CO_2$ 교환과 일차 생산량 등을 정확히 산출하려면 군락 $CO_2$ 플럭스와 더불어 토양 $CO_2$ 플럭스의 관측이 함께 이루어져야 한다. 본 논문에서는 닫힌 역학 챔버 시스템을 활용한 토양 이산화탄소 플럭스의 관측 방법을 간략히 검토하고, 한반도 주요 생태계에 구축된 한국 타워 플럭스 관측 지역망(KoFlux)의 거점 관측소에서 예비 관측된 결과와 서로 다른 관측 시스템간의 상호비교 결과를 보고하고자 한다.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.18-23
• /
• 2016

Injection molded thermoplastic parts may need to be coated to facilitate paint adhesion, or to satisfy other surface property requirements, such as appearance, durability, and weather resistance. In this paper, a two-component polyurethane metering system was developed for the simultaneous injection and surface coating of a plastic substrate. The system was composed of storage tanks, feed pumps, axial piston pumps, mixing head. The tank was designed to be double-jacket structured and fabricated for polyol and isocyanate, respectively. A temperature chamber was used to maintain the material temperature to be $80^{\circ}C$ during flowing from storage tank to mixing head. Inside the chamber, feed pump, low pressure filter, high pressure pump, high pressure filter, pressure sensor, flow meter were installed. A mixing head of L-type was used for homogeneous mixing of polyol and isocyanate. Inside the mixing head, a cartridge heater and a temperature sensor were installed to control the temperature of the materials. The flow rate of axial-piston pump was controlled by using closed-loop feedback control algorithm. The input flow-rates were compared with the measured values. The output error was 6.7% for open-loop control, whereas the error was below 2.2% for closed-loop control. In addition, the pressure generated through mixing-head nozzle increased with increasing flow rate. It was found that the pressure drop between metering pump and mixing-head nozzle was almost 10 bar.