• Journal of Life Science
• /
• v.31 no.2
• /
• pp.199-208
• /
• 2021

Euonymus porphyreus, a species of plant in the Celastraceae family, is widely distributed in East Asia, especially in Southern China. The botanical characteristics of E. porphyreus have been reported, but its antioxidative and anticancer activities remain unclear. In this study, we evaluated the antioxidative and anticancer effects of ethanol extracts of E. porphyreus (EEEP) and the molecular mechanism of its anticancer activity in human lung adenocarcinoma A549 cells. The total polyphenol and flavonoid compound contents from EEEP were 115.42 mg/g and 23.07 mg/g, respectively. EEEP showed significant antioxidative effects with a concentration at 50% of the inhibition (IC50) value of 11.09 ㎍/ml, as measured by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay. EEEP showed cytotoxic activity by increasing the SubG1 cell population of A549 cells in a dose-dependent manner. Apoptosis in A549 cells treated with EEEP was evident due to increased apoptotic cells and apoptotic bodies, as detected by Annexin V and 4,6-diamidino-2-phenylindole (DAPI) staining, respectively. EEEP-induced apoptosis resulted in increased expression of the First apoptosis signal (Fas), p53, and Bax, with decreased expression of Bcl-2 and subsequent activation of caspase-8, -9, and caspase-3, leading to cleavage of poly (ADP-ribose) polymerase (PARP). Collectively, these results suggest that EEEP may exert an anticancer effect by inducing apoptosis in A549 cells through both intrinsic and extrinsic pathways.

• Korean Journal of Animal Reproduction
• /
• v.25 no.1
• /
• pp.1-7
• /
• 2001

This study was to test whether in vitro matured Hanwoo oocytes can be successfully cryopreserved by a new vitrification procedure using MVC method. For the vitrification, oocytes were pretreated in 10% ethylene glycol (EG10) for 5~10 min, exposed in EG30 for 30 sec, each oocyte was individually put on the inner wall of 0.25 $m\ell$ straw, and then straws were directly plunged into L$N_2$. Thawing was taken by 4-step procedures 〔1.0 M sucrose (MS), 0.5 MS, 0.25 MS, and 0.125 MS〕 at 37$^{\circ}C$. In vitro developmental capacity (survival, cleavage ($\geq$2-cell) and blastocyst rates) in vitrified group was no significant difference compared to that in other treatment groups (exposed; 100.0, 74.4, 32.3% and control; 100.0, 78.3, 36.3%): high mean percentage of oocytes (91.2%) was survived, 69.4% of them were cleaved and 27.9% of cleaved embryos were developed to blastocyst. Especially, after transfer of in vitro developed embryos in vitrified group, four of six recipient animals were pregnant and three of them were ongoing-pregnant by manual palpation at 250 days after transfer. This result demonstrates that MVC method is very appropriate freezing method for the Hanwoo in vitro matured oocytes and that ovum bank can be maintained efficiently by MVC cryopreservation method.

• Journal of Embryo Transfer
• /
• v.26 no.1
• /
• pp.19-25
• /
• 2011

This study was carried out to evaluate the effect of early pregnant cow as donor for Ovum Pick-Up (OPU) derived oocyte aspiration and embryo production in Holstein heifers. Four non-pregnant and 2 pregnant Holstein heifers were used as donor and then carried out total 17 OPU session for 10 weeks (2 times per week). Recovered cumulus-oocyte-complexes (COCs) were classified into 4 grade by oocyte cytoplasm and cumulus cells and matured in vitro in TCM-199 supplemented with 10% FBS, 10 mg/ml FSH and 1 mg/ml estradiol in 5% $CO_2$ and over 99% humidity for 24 h. After 24 h co-incubation with post-thaw sperm, the presumed zygotes were cultured in CR1aa medium with 4 mg/ml BSA for 3 days and then changed CR1aa medium with 10% of FBS for another 3~4 days. The Mean number of aspirated follicles and collected oocytes in the early stage pregnant and non-pregnant heifers were $13.0{\pm}4.3$ and $10.6{\pm}3.9$, $5.4{\pm}3.4$ and $7.7{\pm}3.6$ per session, respectively. Rate of collected oocyte from aspirated follicles were 59.2% and 50.5%, respectively. The average number of good quality oocytes (Grade I and II) in the early stage pregnant and non-pregnant heifers was $3.7{\pm}2.7$ and $4.9{\pm}2.6$ (Mean${\pm}$SD). Cleavage and blastocyst developmental rates in Grade I and II were 22.2% and 25.5%, and then $1.7{\pm}0.9$ and $1.4{\pm}1.1$ blastocyst per session, respectively. In conclusion, OPU technology can be used in early stage pregnant and non-pregnant heifers without any problem and so applied OPU derived embryo production to maximize the ability of genetically valuable females.

• Korean Journal of Animal Reproduction
• /
• v.23 no.1
• /
• pp.85-92
• /
• 1999

This study was designed to determine effect of cryoprotectant kinds and cell stages on OPP vitrification method in mouse embryos. The freezing speed, cryoprotectants and cell stage could affect of embryo viability following various vitrification methods. The vitrification solution used were consisting of 40% (v/v) ethylene glycol, 18% (w/v) Ficoll, 0.3 M sucrose solution in holding medium (D-PBS supplemented with 5% FCS: HM) (EFS) or 16.5% ethylene glycol , 16.5% dimethyl sulfoxide, 0.5 M sucrose in HM (EDS). The embryos were collected from oviduct at 18 h after hCG injection and then washed and cultured in mHTF medium until use. In experiment 1, the blastocysts were vitrified by OPP straw to determine the optimal vitrification solution of EFS or EDS. The post-thaw survival rates at re-expanded stage rates were significantly different between EFS and EDS (95.0 vs 100%), but at hatching stage was not different between EFS and EDS (90.0 vs 95.0%). respectively. In experiment 2, zygotes, 2-, 4-cell, morula and blastocysts were vitrified by OPP method to determine the acceptable of early stage embryos. The development rates to expanded blastocyst in zygote (70.0%) were significantly lower rather than those in 2-, 4- 8-cell, compacted morula or blastocyst (89.7, 90.0, 92.8, 97.6 or 97.5%), respectively. However, the cell number of post-thaw developed to expanded blastocyst in blastocyst and control blastocyst stage (39.6$\pm$2.81, 35.7$\pm$2.98) were significanty higher than those in zygote, 2-, 4-, 8-cell, compacted morula (29.8$\pm$3.21, 31.3$\pm$3.83, 29.3$\pm$3.58, 28.9$\pm$3.21 or 30.8$\pm$2.93). In experiment 3, the zygotes were exposed in VSl for 1, 2, and 3 min to the optimal exposed time. The cleavage rates (91.6, 88.5, 88.9%) and develop mental rates to blastocyst (83.3, 74.3 and 69.4%) depends on the exposed time in VSl were not significantly different among 1, 2, or 3 min, respectively. The cell number also were not significantly different among exposed time in VS1. respectively. These results indicate that OPP method could be useful for vitrification either EFS or EDS vitrification solution. The post-thaw survival rates at zygote were significantly lower than those at 2-, 4-, 8-cell, morula or blastocyst, respectively. The zygote stage were more sensitive rather than late stage embryos. The exposing time in VS1 for 1 min was better than that for 2 or 3 min, even it was not significantly different. The OPP vitrification method could be useful of mouse embryos either with EFS or EDS vitrification solution.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.701-710
• /
• 2002

Studies on the Viability of In Vitro-Matured Bovine Oocytes Vitrified by Microdrop and Straw Method To establish vitrification method for bovine oocytes, mature bovine oocytes were vitrified by microdrop (MD) or straw (Straw) method and the viability of vitrified oocytes with or without cumulus cells (CC) were examined by several methods; a) parthenogenetic activation; b) pronuclear formation after in vitro fertilization (IVF); and c) embryonic development after IVF. The survival rate of vitrified oocytes by MD was significantly higher than by Straw (92.50 vs. 74.19%, p<0.05). Most of the oocytes survived from vitrification using the MD methods. Cleavage and blastocyst development of parthenogenetically activated oocytes were higher in MD (45.05% and 10.81%, respectively; p<0.05)) than those in Straw method (27.17% and 6.52%, respectively; p<0.05). Male and female pronuclear formation of vitrified-thawed oocytes with or without cumulus cells (CC) after IVF were examined, respectively. The survival rate of vitrified oocytes by MD without CC was no difference between MD and Straw (80.368.14% vs. 67.31%). Normal fertilization (2PN) rates were not different among groups (Fresh; 54.55% vs. MD; 42.22% vs. Straw; 37.14%, p>0.05). While no fertilization (<1PN) rates were significantly different between fresh and vitrified-thawed groups (Fresh; 32.47% vs. MD; 57.78% and Straw 62.86%, p<0.05). The polyspermy (3PN) was appeared in the fresh (12.99%), but no appeared in the vitrified-thawed groups. In the without CC, normal fertilization (2PN) rates were significantly different between fresh and vitrified-thawed oocytes (Fresh; 59.38% vs. MD; 17.31% and Straw; 30.43%, p<0.05). Moreover, no fertilization (<1PN) rates were significantly different between fresh and vitrified-thawed groups (Fresh; 23.44% vs. MD; 73.08% and Straw 58.70%, p<0.05). The polyspermy (3PN, >4PN) was appeared not only fresh but vitrified-thawed groups. After IVF, two-cell developmental rates of vitrified oocytes with CC by MD and Straw were significantly low compared to fresh oocytes (Fresh; 81.76% vs. MD; 22.22% and Straw; 11.36%, p<0.05). Blastocyst developmental rates of vitrified oocytes also were significantly low compared to fresh oocytes (Fresh; 28.38 vs. MD; 1.71% and Straw 0%, p<0.05). In the without CC, two-cell developmental rates were no difference between Fresh and MD (27.59% vs. 19.25%, p<0.05), while blastocyst rates were difference between Fresh and MD or Straw (4.31% vs. 0.62% and 0%, respectively; p<0.05). In conclusion, the results indicate that the vitrified bovine oocytes have the ability to develop to the blastocyst stage after IVF.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.1
• /
• pp.41-56
• /
• 2021

The characteristics of the six rock cleavages(R1~H2) in Jurassic Hapcheon granite were analyzed using the distribution of ① microcrack lengths(N=230), ② microcrack spacings(N=150) and ③ Brazilian tensile strengths(N=30). The 18 cumulative graphs for these three factors measured in the directions parallel to the six rock cleavages were mutually contrasted. The main results of the analysis are summarized as follows. First, the frequency ratio(%) of Brazilian tensile strength values(kg/㎠) divided into nine class intervals increases in the order of 60~70(3.3) < 140~150(6.7) < 100~110·110~120(10.0) < 90~100(13.3) < 80~90(16.7) < 120~130·130~140(20.0). The distribution curve of strength according to the frequency of each class interval shows a bimodal distribution. Second, the graphs for the length, spacing and tensile strength were arranged in the order of H2 < H1 < G2 < G1 < R2 < R1. Exponent difference(λS-λL, Δλ) between the two graphs for the spacing and length increases in the order of H2(-1.59) < H1(-0.02) < G2(0.25) < G1(0.63) < R2(1.59) < R1(1.96)(2 < 1). From the related chart, the six graphs for the tensile strength move gradually to the left direction with the increase of the above exponent difference. The negative slope(a) of the graphs for the tensile strength, suggesting a degree of uniformity of the texture, increases in the order of H((H1+H2)/2, 0.116) < G((G1+G2)/2, 0.125) < R((R1+R2)/2, 0.191). Third, the order of arrangement between the two graphs for the two directions that make up each rock cleavage(R1·R2(R), G1·G2(G), H1·H2(H)) were compared. The order of arrangement of the two graphs for the length and spacing is reverse order with each other. The two graphs for the spacing and tensile strength is mutually consistent in the order of arrangement. The exponent differences(ΔλL and ΔλS) for the length and spacing increase in the order of rift(R, -0.08) < grain(G, 0.14) < hardway(H, 0.75) and hardway(H, 0.16) < grain(G, 0.23) < rift(R, 0.45), respectively. Fourth, the general chart for the six graphs showing the distribution characteristics of the microcrack lengths, microcrack spacings and Brazilian tensile strengths were made. According to the range of length, the six graphs show orders of G2 < H2 < H1 < R2 < G1 < R1(< 7 mm) and G2 < H1 < H2 < R2 < G1 < R1(≦2.38 mm). The six graphs for the spacing intersect each other by forming a bottleneck near the point corresponding to the cumulative frequency of 12 and the spacing of 0.53 mm. Fifth, the six values of each parameter representing the six rock cleavages were arranged in the order of increasing and decreasing. Among the 8 parameters related to the length, the total length(Lt) and the graph(≦2.38 mm) are mutually congruent in order of arrangement. Among the 7 parameters related to the spacing, the frequency of spacing(N), the mean spacing(Sm) and the graph (≦5 mm) are mutually consistent in order of arrangement. In terms of order of arrangement, the values of the above three parameters for the spacing are consistent with the maximum tensile strengths belonging to group E. As shown in Table 8, the order of arrangement of these parameter values is useful for prior recognition of the six rock cleavages and the three quarrying planes.

• Economic and Environmental Geology
• /
• v.8 no.3
• /
• pp.117-124
• /
• 1975

Wet chemical analysis (for $MnO_2$, MnO, and $H_2O$(+)) and electron microprobe analysis (for $Fe_2O_3$ and PbO) give $MnO_2$ 74.91, MnO 11.33, $Fe_2O_3$ (total Fe) 4.19, PbO 0.03, $H_2O$ (+) 9.46, sum 99.92%. 'Available oxygen determined by oxalate titration method is allotted to $MnO_2$ from total Mn, and the remaining Mn is calculated as MnO. Traces of Ba, Ca, Mg, K, Cu, Zn, and Al were found. Li and Na were not found. The existence of (OH) is verified from the infrared absorption spectra. The analysis corresponds to the formula $Mn^{4+}{_{4.85}}(Mn^{2+}{_{0.90}}Fe^{3+}{_{0.30}})_{1.20}O_{8.09}(OH)_{5.91}$, on the basis of O=14, 'or ideally $Mn^{4+}{_{5-x}}(Mn^{2+},Fe^{3+})_{1+x}O_{8}(OH)_{6}$ ($x{\approx}0.2$). X-ray single crystal study could not be made because of the distortion of single crystals. But the x-ray powder pattern is satisfactorily indexed by an orthorhombic cell with a 9.324, b 14.05, c $7.956{\AA}$., Z=4. The indexed powder diffraction lines are 9.34(s) (100), 7.09(s) (020), 4.62(m) (200, 121), 4.17(m) (130), 3.547(s) (112), 3.212(vw) (041), 3.101(s) (300), 2.597(w) (013), 2.469(m) (331), 2.214(vw)(420), 2.098(vw) (260), 2.014 (vw) (402), 1.863(w) (500), 1.664(w) (314), 1.554(vw) (600), 1.525(m) (601), 1.405(m) (0.10.0). DTA curve shows the endothermic peaks at $250-370^{\circ}C$ and $955^{\circ}C$. The former is due to the dehydration: and oxidation forming$(Mn,\;Fe)_2O_3$(cubic, a $9.417{\AA}$), and the latter is interpreted as the formation of a hausmannite-type oxide (tetragonal, a 5.76, c $9.51{\AA}$) from $(Mn,\;Fe)_2O_3$. Infrared absorption spectral curve shows Mn-O stretching vibrations at $515cm^{-1}$ and $545cm^{-1}$, O-H bending vibration at $1025cm^{-1}$ and O-H stretching vibration at $3225cm^{-1}$. Opaque. Reflectance 13-15%. Bireflectance distinct in air and strong in oil. Reflection pleochroism changes from whitish to light grey. Between crossed nicols, color changes from yellowish brown with bluish tint to grey in air and yellowish brown to grey through bluish brown in oil. No internal reflections. Etching reactions: HCl(conc.) and $H_2SO_4+H_2O_2$-grey tarnish; $SnCl_2$(sat.)-dark color; $HNO_3$(conc.)-grey color; $H_2O_2$-tarnish with effervescence. It is black in color. Luster dull. Cleavage one direction perfect. Streak brownish black to dark brown. H. (Mohs) 2-3, very fragile. Specific gravity 3.59(obs.), 3.57(calc.). It occurs as radiating groups of flakes, flower-like aggregates, colloform bands, dendritic or arborescent masses composed of fine grains in the cementation zone of the supergene manganese oxide deposits of the Janggun mine, Bonghwa-gun, southeastern Korea. Associated minerals are calcite, nsutite, todorokite, and some undetermined manganese dioxide minerals. The name is for the mine, the first locality. The mineral and name were approved before publication by the Commission on New Minerals and Mineral Names, I.M.A.

• Journal of Korean Society of Forest Science
• /
• v.16 no.1
• /
• pp.33-62
• /
• 1972

Pitch pine (Pinus rigida Miller) in Korea has become one of the major silvicultural species for many years since it was introduced from the United States of America in 1907. To attain the more rational wood utilization basical researches on wood properties are primarily needed, since large scale of timber production from Pitch Pine trees has now been accomplishing in the forested areast hroughout the country. Under the circumustances, this experiment was carried out to study the wood anatomical, physical and mechanical properties of Pitch Pine grown in the country. Materials used in this study had been prepared by cutting the selected pitch pine trees from the Seoul National University Forests located in Suwon. To obtain and compare the anatomical and physical properties of the different parts of tree such as stem, branch, top and rootwood, this study had been divided into two categories (anatomical and physical). For the anatomical study macroscopical and microscopical features such as annual ring, intercellular cannal, ray, tracheid, ray trachid, ray parenchyma cell and pit etc. were observed and measured by the different parts (stem, branch, root and topwood) of tree. For the physical and mechanical properties the moisture content of geen wood, wood specific gravity, shrinkage, compression parallel to the grain, tension parallel and perpendicular to the grain, radial and tangential shear, bending, cleavage and hardness wree tested. According to the results this study may be concluded as follows: 1. The most important comparable features in general properties of wood among the different parts of tree were distinctness and width of annual ring, transition from spring to summerwood, wood color, odor and grain etc. In microscopical features the sizes of structural elements of wood were comparable features among the parts of tree. Among their features, length, width and thickness of tracheids, resin ducts and ray structures were most important. 2. In microscopical features among the different parts of tree stem and topwood were shown simillar reults in tissues. However in rootwood compared with other parts on the tangential surface distinctly larger ray structures were observed and measured. The maximum size of unseriate ray was attained to 27 cell ($550{\mu}$) height in length and 35 microns in width. Fusiform rays were formed occasionally the connected ray which contain one or several horizontal cannals. Branchwood was shown the same features like stemwood but the measured values were very low in comparing with other parts of tree. 3. Trachid length measured among the different parts of tree were shown largest in stem and shortest in branchwood. In comparing the tracheid length among the parts the differences were not shown only between stem and rootwood, but shown between all other parts of tree. Trachid diameters were shown widest in rootwood and narrowest in branchwood, and the differences among the different parts were not realized. Wall thickness were shown largest value in rootwood and smallest in branchwood, and the differences were shown between root and top or branchwood, and between stem and branch or top wood, but not shown between other parts of tree. 4. Moisture contents of green wood were shown highest in topwood and lowest in heartwood of stem. The differences among the different parts were recognized between top or heartwood and other parts of tree, but not between root and branchwood or root and sapwood. 5. Wood specific gravities were shown highest in stem and next order root and branchwood, but lowest in topwood. The differences were shown clearly between stemwood and other parts of tree, but not root and branchwood. However the significant difference is realized as most lowest value in topwood. 6. In compression strength parallel to the grain compared among the different parts of tree at the 14 percent of moisture content, highest strength was appeared in stem, next order branch and rootwood, but lowest in topwood. 7. In bending strength compared among the different parts of tree at the 14 percent of moisture content clearly highest strength was shown in branchwood, next order stem and root, but lowest in topwood. Though the branchwood has lower specific gravity than stemwood it was shown clearly high bending strength.