• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.213-215
• /
• 2001

This paper describes an improved analysis method for sheath circulating current on three-underground transmission cables using EMTP(Electromagnetic Transient Program). Author studied diversely the sheath circulating current on three-underground cables depending on the various length rate, the phase arrangement, and the grounding resistance of the sheath in the cross-bonded section. It was clear that very large circulating current is generated in cable systems due to unbalanced length rate and phase arrangement in the cross-bonded section. The analysing method for two or more underground cables will be really Improved for cable system utility.

• Journal of Magnetics
• /
• v.12 no.4
• /
• pp.152-155
• /
• 2007

Spin dependent transport was investigated in lateral $Py(Ni_{81}Fe_{19})/Au/Py$ spin valve devices. Clear spin valve effect was observed in conventional four-terminal measurement geometry. Higher resistance was found in antiparallel magnetization field of two Py electrodes which is determined by anisotropy magnetoresistance (AMR) measurements. The rectangular shape of spin signal together with good agreement of switching field convinces observed spin valve signal is resulted from effective spin injection and detection. The magnetoresistance ratio decays exponentially with channel length by which spin diffusion length of Au channel was estimated to be 76 nm.

• Journal of Plant Biology
• /
• v.28 no.1
• /
• pp.9-20
• /
• 1985

Dimensional variation of secondary xylem elements, such as vessel element and fiber, was investigated in root, stem and branch of Alnus hirsuta and A. firma. It is clear that vessel diameter in the root is the widest, next in the stem, and the least in the branch. Length of vessel element among them becomes, however, larger in following sequence; stem, root, and branch, whereas fiber diameter and length are the widest in the root, the second in the stem, and the least in the branch. The size of secondary xylem element at any one level in tree increases from the center (pith) of the organs through a number of annual rings to the outer.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.4
• /
• pp.193-200
• /
• 2003

The use of underground transmission tables has continuously increased in densely inhabited urban and suburban area. Due to a increasing demand of underground cables, two or more circuits are installed in parallel for several kilometers. It, however, has not been realized that the sheath circulating current is generated in the system where a large number of cables are laid in the same route. In this paper, Author studied diversely the sheath circulating current on underground cables depending on the various length rate, the phase arrangement, and the grounding resistance of the sheath in the cross-bonded section. It was clear that very large circulating current is generated in cable systems due to unbalanced length rate and phase arrangement in the cross-bonded section.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.488-491
• /
• 2000

Bi-2223/Ag superconducting wires have been mainly prepared by a powder-in-tube method. The drawing and the rolling are main processes to increase the core density and wire length. In the fabrication of long wire, especially, the drawing should be precisely controlled to assure the filament homogeneity. In this paper, the influences of drawing die angle, bearing length and reduction ratio on the sausaging and the critical current density of the wire are investigated. Single cored and multi-filamentary wires are fabricated by PIT method with different conditions. The core densities and sausaging in the wires are investigated and are discussed regarding their relationship to the I$_{c}$. It was made clear that the geometry of drawing die is sensitively dependent on the sausaging. The improvement of I$_{c}$ was achieved by reducing the die angle and high core density.ity.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.9-13
• /
• 1998

Visual system of Korean Salamander(Hynobius leechi) was morphologically studied. Fertilized eggs in egg sacs were collected and were developed in sterile saline solution. Various sized larvae of 5-30mm in length were fixed. Specimens were paraffin sectioned and were observed under light microscope. In 5mm length larva, lens rudiment induced by optic cup was combined with sensory ectoderm. The shape of lens was changed as spherical in 12mm length larva, but the retinal layer did not differentiated into three layers. The differentiation of retinal layer was clear in 14-16mm length larva. The central region of lens fibers was degenerated. Iris and ciliary body were formed from the marginal zone of optic cup in 20mm length larva. Choroid was thicker in elder eye of 30mm length larva and cartilage developed at outer region of optic cup. The outer segment of photoreceptor cell layer grew longitudinally. Optic nerve was connected to the ventral part of brain through cartilage.

• Development and Reproduction
• /
• v.14 no.1
• /
• pp.21-25
• /
• 2010

Nile tilapia (Oreochromis niloticus) are mouth-brooders so that the females holding eggs in their mouth sacrifice their somatic growth for reproduction. For this reason, artificial control of reproduction for the culture of this species has been of interest. Manipulation of photoperiod is an emerging technique for such purpose, but little information is available to establish appropriate photoperiod regime. To obtain necessary basic information, sexually mature females were individually accommodated to glass aquarium, and the spawning activity of these females were monitored for two years under natural photoperiod regime. Female tilapia spawned most frequently on March, April and May when the day length gradually increased from 11 hours to 14 hours and least frequently on September, October, November and December when the day length gradually decreased from 13 hours to less than 10 hours in the first year. The decrease of spawning frequency as day length decreased was also observed in the second year, although the increase of spawning frequency as day length increased was less clear. Spawning of female tilapia was less active when the night was dark due to the disappearance of moonlight (Dark Phase), compared to the Phase of Getting Lighter, Light Phase and Phase of Getting Darker. Results from this study suggest that long day length, particularly increasing phase, is favoured for active spawning of Nile tilapia, and that this species, as a tropical fish species, may utilize changing lunar phases as a secondary environmental cue for reproduction.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.2
• /
• pp.56-74
• /
• 2013

Stall stagnations in the system of axial-flow compressors and ducts occur in transition from deep surge conditions to decayed or converged stall conditions. The present study is concerned with the boundaries between the deep surges and the stagnation stalls on the basis of analytical results by a code on surge transients analysis and simulation. The fundamental acoustical-geometrical stagnation boundaries were made clear from examinations of the results on a variety of duct configurations coupled with a nine-stage compressor and a single stage fan. The boundary was found to be formed by three parts, i.e., B- and A-boundaries, and an intermediate zone. The B-boundary occurs for the suction-duct having a length of about a quarter of the wave-length of the first resonance in the case of very short and fat plenum-type delivery duct. On the other hand, the A-boundary occurs for the long and narrow duct-type delivery flow-path having a length about a fifth of the wavelength and relatively small sectional area in the case of short and narrow suction ducts. In addition to this, the reduced surge-cycle frequencies with respect to the duct lengths are observed to have respective limiting values at the stagnation boundaries. The reduced frequency for the B-boundary is related with a limiting value of the Greitzer's B parameter. The tendency and the characteristic features of the related flow behaviors in the neighborhood of the boundaries were also made clearer.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.1
• /
• pp.51-56
• /
• 2004

Age and growth of three-lined tonguefish (Cynoglossus abbreviatus) were studied using samples from the waters off Yosu, Korea, from June to December, 2001. Sagittal otoliths had relatively clear annuli. Each annulus was formed once a year in April. The peak of the gonadosomatic index occurred also in April. The oldest fish observed in this study was 5 years old for females and 4 years old for males. The relationship between the otolith radius (R) and total length (L) was as follows: L=14.921R-2.5318 for females and L=13.527R-0.5584 for males. The relationship between total length and body weight (W) was as follows: $W=0.0008L^{3.54}$ for females and $W=0.0029L^{3.14}$ for males. The growth in length of the fish was expressed by the von Bertalanffy's growth equation as: $$L_t=44.54(1-e^{-0.16(t+2.69)})\;for\;females\;and\;L_t=41.52(1-e^{-0.15(t+3.34)})\;for\;males$$.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1579-1586
• /
• 2020

Dissimilar metal joints (DMJs) are more common in the application of piping system of many industries. A 2- D and 3-D finite element analysis (FEA) is carried out on dissimilar metal Single Edged Notch Bending (DMSENB) specimens fabricated from ferritic steel, austenitic steel and Inconel - 182 alloy to study the behavior of DMJs with constraints by using linear elastic fracture mechanics (LEFM) principles. Studies on DMSENB specimens are conducted with respect to (i) dissimilar metal joint width (DMJW) (geometrical constraints) (5 mm, 10 mm, 20 mm, 30 mm and 50 mm) (ii) strength mismatch (material constraints) and (iii) crack lengths (16 mm, 20 mm and 24 mm) to study the DMJ behavior. From the FEA investigation, it is observed that (i) SIF increases with increase of crack length and DMJWs (ii) significant constraint effect (geometry, crack tip and strength mismatch) is observed for DMJWs of 5 mm and 10 mm (iii) stress distribution at the interfaces of DMSENB specimen exhibits clear indication of strength mismatch (iv) 3-D FEA yields realistic behavior (v) constraint effect is found to be significant if DMJW is less than 20 mm and the ratio of specimen length to the DMJW is greater than 7.4.