• 한국산림과학회지
• /
• 제112권4호
• /
• pp.426-441
• /
• 2023

본 연구에서는 수확벌채에 따른 수목의 뿌리 점착력의 변화와 토양의 포화를 가정한 지표유출의 세 가지 흐름 기법(SFD; Single flow direction, MFD; Multiple flow direction, IFD; Infinite flow direction)을 무한사면 안전율 공식에 적용하여 산사태 발생 예측 모델링의 정확성을 분석하였다. 이를 위해 2020년 8월 집중호우의 영향으로 자연사면과 벌채사면에서 다수의 산사태가 발생한 제천지역을 연구지역으로 선정하였다. 위성영상과 25cm급 항공사진을 이용한 산사태 인벤토리 맵핑 결과, 연구지역 내에서 총 830개소의 산사태 발생원이 확인되었다. 산사태 모델링 결과, 벌채에 따른 뿌리 점착력의 변화를 고려한 경우(MFD: 0.81, IFD: 0.80, SFD: 0.80)가 벌채의 영향을 고려하지 않은 경우(MFD: 0.79, IFD: 0.79, SFD: 0.78)에 비하여 AUROC(Area Under the Receiver Operating Characteristics) 분석에서 정확성이 1.3~2.6% 향상되는 것으로 나타났다. 또한, MFD 알고리즘을 이용한 경우는 다른 알고리즘과 비교하여 AUROC 분석에서 정확성이 최대 1.3% 향상되었다. 이러한 결과는 식생조건의 변화를 고려한 뿌리 점착력의 차등 적용과 지표유출수 흐름기법의 선정이 산사태 예측 모델링에 영향을 미칠 수 있음을 시사한다. 향후 이 연구의 결과는 현지 수문모니터링과 함께 수종별 뿌리 점착력의 특징 및 변화를 고려하여 검증되어야 할 것이다.

• 한국주조공학회지
• /
• 제29권1호
• /
• pp.33-37
• /
• 2009

Cartesian grid system has mainly been used in the casting simulation even though it does not nicely represent sloped and curved surfaces. These distorted boundaries cause several problems. A special treatment is necessary to clear these problems. In this paper, we propose a new method that can consider the cutting cells which are cut by casting and mold based on the partial cell treatment (PCT). This method provides a better representation of geometry surface and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian grid system. Various test examples for several casting process were computed and validated. The analysis results of more accurate fluid flow pattern and less momentum loss owing to the stepped boundaries in the Cartesian grid system were confirmed. By using the cut cell method, performance of computation gets better because of reducing the whole number of meshes.

• BMB Reports
• /
• 제43권6호
• /
• pp.383-388
• /
• 2010

The number of cancer patients has increased due to longer life spans and treatment has become a universal problem. Since molecular-targeted therapies were introduced as a new developmental strategy, certain targets have been examined hundreds of times, with developers overlapping their research efforts. We need to focus our energy and resources on novel drug candidate identification and optimization, in order to enhance the entry of early-stage drug candidates into the therapeutics pipeline. This presents a major opportunity for Korea to jump the decades-old development gap between our programs and those that are more advanced in other countries. Although this country does not have a specific center for validation and development of cancer therapeutics, we do have cutting-edge scientists performing research in many institutions. In this paper, I will review cancer drug development in Korea and suggest future directions, while urging colleagues to utilize their networking expertise so we can move toward a new paradigm of novel therapeutics development. An example of such efforts has begun with the Drug Development Consortium, which was described in the KSBMB chapter. This consortium was launched in 2010 by biochemists, chemists, cell and molecular biologists and pharmacologists. It is clear that effective cancer therapeutics will be developed more efficiently when we all strive for the same goal.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.518-522
• /
• 2011

Cartesian grid system has mainly been used in the casting simulation even though it does not nicely represent sloped and curved surfaces. These distorted boundaries cause several problems. A special treatment is necessary to clear these problems. A cut cell method on Cartesian grids has been developed to simulate three-dimensional mold filling Cut cells at a cast-mold interface are generated on Cartesian grids. Governing equations were computed using volume and areas of cast at cut cells. In this paper, we propose a new method that can consider the cutting cells which are cut by casting and mold based on the patial cell treatment (PCT). This method provides a better representation of geometry surface and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian gird system. Various test examples for several casting process were computed and validated. The analysis results of more accurate fluid flow pattern and less momentum loss owing to the stepped boundaries in the Cartesian grid system were confirmed. We can know the momentum energy at the cut cell is conserved by using the cut cell method. By using the cut cell method. performance of computation gets better because of reducing the whole number of meshes.

• 소성∙가공
• /
• 제22권8호
• /
• pp.437-441
• /
• 2013

Recently, the engraving of letters or a pattern on a product surface has received more attention especially in trying to satisfy the customer requirements. Half-piecing is a protrusion forming process that pierces only 40~50% of the material thickness. In the current study, the half-piercing technique for making clear letters by protruding sheet material was selected and studied. The influence of clearance and penetration depth was investigated by measuring the camber and extruded length of a protrusion after experiments. In addition, a numerical analysis was performed for the same working conditions and compared with experimental results. It is shown that, as the clearance increases, the camber of a protrusion increases rapidly and the extruded length decreases slightly. The deformation pattern around the cutting edge during half-piercing changes from an extrusion mode to a shearing mode as the clearance changes from minus to plus values. It is also confirmed that the experimental results show a good agreement with the numerical analyses.

• 한국유기농업학회지
• /
• 제9권4호
• /
• pp.95-111
• /
• 2001

To carry out the Integrated Fruit Production(IFP), researches on cover crops as well the Integrated Pest Management(IPM) and the Integrated Nutrition Management(INM) should be very important. These concepts are neither clear nor connective till now. The researches on cover crops in Europe and USA are being kept within the category of IFP. Main researches on fruit trees for sustainable agriculture in Italy are new variety creation, development of growing techniques, pest and disease control, and cover crops management, etc. It is necessary of fruit industry in Korea to maintain good quality and taco-friendly fruit production. For this goal, we need international cooperation with highly developed countries in Europe. In first step, we should enlarge research areas and analyze results obtained to get farmers understood the concept of cover crop growing, Furthermore, we make researches more profoundly on cover crops growing considering tree age, mixing rates among cover crops, seeding and cutting time for cover crops, and so on. Researchers, specialists of agricultural extensions, and farmers should concentrate their opinions and conduct IFP together. The IFP should go on systematically and reach finally to get certificates internationally by the International Organization for Biological and integrated Control of Noxious Animals and Plants(IOBC) to enhance selling and exporting fruits.

• 국제초고층학회논문집
• /
• 제6권4호
• /
• pp.297-300
• /
• 2017

Employers are realizing that workplaces have an immense impact on productivity. And, because people typically represent about 90% of a company's costs, even a slight improvement in productivity hits the bottom-line in a very big way. The focus is shifting away from saving money by reducing space needs or cutting energy requirements, and moving toward making the workplace friendlier and healthier. What is a healthy workplace, exactly? The answer should be clear by now. Mountains of research have expounded on this very topic, and then news outlets cover the latest discoveres ad infinitum. The problem is, research is rather dense, while the news isn't comprehensive. Office managers trying to improve workplace wellness want neither a 55-page report nor a half dozen articles to convince their landlord that their space can do better. Recognizing this gap, Harvard researchers have released a concise-yet-complete list of healthy building features. Here, we're sharing these nine features with a few insights of our own on the value of being healthy and productive. Find out: ${\bullet}$ What makes a healthy building and why is it so important ${\bullet}$ How to improve the health of your own office ${\bullet}$ What happens for your people and your bottom line when you make health a priority.

• Steel and Composite Structures
• /
• 제18권3호
• /
• pp.739-756
• /
• 2015

This paper presents investigations on the hysteretic behavior of concrete-filled circular tubular (CFCT) T-joints subjected to axial cyclic loading at brace end. In the experimental study, four specimens are fabricated and tested. The chord members of the tested specimens are filled with concrete along their full length and the braces are hollow section. Failure modes and load-displacement hysteretic curves of all the specimens obtained from experimental tests are given and discussed. Some indicators, in terms of stiffness deterioration, strength deterioration, ductility and energy dissipation, are analyzed to assess the seismic performance of CFCT joints. Test results indicate that the failures are primarily caused by crack cutting through the chord wall, convex deformation on the chord surface near brace/chord intersection and crushing of the core concrete. Hysteretic curves of all the specimens are plump, and no obvious pinching phenomenon is found. The energy dissipation result shows that the inelastic deformation is the main energy dissipation mechanism. It is also found from experimental results that the CFCT joints show clear and steady stiffness deterioration with the increase of displacement after yielding. However, all the specimens do not perform significant strength deterioration before failure. The effect of joint geometric parameters ${\beta}$ and ${\gamma}$ of the four specimens on hysteretic performance is also discussed.

• 한국산림과학회지
• /
• 제102권2호
• /
• pp.239-246
• /
• 2013

본 연구에서는 15% 군상잔존벌채의 식생 및 종다양성 보전 효과를 분석하기 위하여 경상북도 봉화군 신갈나무 성숙림(임령 100년 이상)에서 처리 전 후 조사를 통하여 직접적인 식생 변화를 관찰하였다. 벌채구(0.85), 잔존구(0.15) 및 대조구(1.0)에 1의 초본방형구를 각각 192개, 36개, 300개 설치한 후 하층식생의 피도 및 종다양성의 변화, 초본 및 목본의 생육형별 변화, 그리고 군집 변화(서열분석)등을 분석하였다. 서열분석 결과, 잔존구는 벌채구와 비교하여 전체적인 식생 속성 변화가 낮게 나타났다. 처리 직후, 벌채구는 기계적 피해에 의해 피도가 약간 감소(15.6%에서 14.7%)하였으며, 종풍부도(14종에서 22종)는 증가하였다. 잔존구 및 대조구는 피도 및 종풍부도 모두 증가하였다. 생육형 측면에서 15% 잔존벌채 이후 초기변화는 목본성 종 보다는 초본성 종의 양 증가에 영향을 미치는 것으로 나타났다. 처리 이후, 잔존구는 가장자리 증가에 의한 환경 변화 및 그에 따른 반응을 나타냈고, 벌채구는 벌채교란에 기인한 기계적 피해를 포함한 임분 구조 변화에 의한 반응이 나타났다. 본 연구는 임분 처리 전 자료를 수집하여 진행되고 있다는 점에서 지속적 관찰의 필요성이 높다.

• 한국토양비료학회지
• /
• 제6권4호
• /
• pp.245-251
• /
• 1973

세 Alfalfa 품종(品種)(Medicago sativa L. var. Moapoa, Washoe, Lahontan)의 건물생산량(乾物生産量)과 양분흡수(養分吸收)에 미치는 석회(石灰)와 근류균접종효과(根瘤菌接種效果)를 적황색(赤黃色) 사양토(砂壤土)(여기(麗岐) 산토양 pH 4.9)를 사용(使用) Pot시험(試驗)으로 조사(調査)하였다. 1. 무석회구(無石灰區)에서는 발아율이 낮고 그후 생육(生育)이 되지 아니하였으며 Moapa가 가장 강하였다. 2. 무접종구(無接種區)의 건물수량(乾物收量)은 Moapa>Washoe>Lahontan의 순(順)이고 접종효과(接種效果)는 이와 반대였으며 근류균(根瘤菌) 착생에는 큰 차이(差異)가 없었다. 3. 예취시기가 경과함에 따라 무접종구(無接種區)의 수량(收量)이 증가(增加)하고 접종효과(接種效果)가 감소하였으며 질소농도(窒素濃度)에 있어서도 같은 경향이었다. 4. Moapa는 다른 두 품종(品種)에 비(比)하여 N, Ca, Mg의 농도(濃度)가 높은 반면 P, K의 농도(濃度)는 낮았다. 5. Washoe는 Lahontan에 비(比)하여 K가 높고 Ca가 낮으며, Lahontan은 Washoe에 비(比)하여 P가 높고 Mg가 낮다. 6. 접종(接種)에 의(依)해 예취시기가 경과함에 따라 P, K가 감소하였다. 7. Moapa의 다수성(多收性)은 N, Ca, Mg 흡수력(吸收力)이 강한 반면 P, K의 요구도가 적은데 기인하는 것으로 보였다.