• Nuclear Engineering and Technology
• /
• 제26권1호
• /
• pp.140-148
• /
• 1994

원전 증기발생기 2차측 제철 화학세정을 기존의 93$^{\circ}C$ 표준공정보다 고온인 1$25^{\circ}C$에서 검증시험을 수행하였다. 원전 증기발생기를 1$25^{\circ}C$에서 화학 세정한다는 가정아래 현장세정 조건을 결정하고 이를 다시 모사하여 3l 용량의 소형 검증시험 조건을 결정하였다. 1 gallon 용량의 316 스텐레스강 압력용기를 반응용기로 사용하는 화학세정 시험장치에서 검증시험을 수행하여 스러지 용해거동, 모재 부식률, 세정제 화학조성 변화거동 등을 측정하였다. 1$25^{\circ}C$ 검증시험 결과에서 93$^{\circ}C$ 표준공정보다 세정시간을 절반이하로 단축시키고도 더 효율적인 세정효과를 얻을 수 있을 뿐만이 아니라 2차측 모재의 부식률도 감소함을 확인할 수 있었다. 그러나 고온 세정공정은 아직 현장적용 경험이 없고, 별도의 외부순환 세정 장치를 이용하는 93$^{\circ}C$ 표준공정과는 달리 주냉각재의 잠열로 2차측을 가열하므로 세정이 완료될 때까지 주냉각 펌프를 계속 가동하여야 하는 단점이 있다. 가동중인 증기발생기에 대한 화학세정을 수행할 때 93$^{\circ}C$ 표준공정과 고온공정의 장 단점을 신중히 검토하여 최적공정을 적용하여야 할 것이다.

• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.97-109
• /
• 2020

Membrane fouling is the main drawback of membrane technology. Frequent membrane cleaning and membrane replacement are, therefore, required to reduce membrane fouling that causes permeate flux reduction, lower rejection, or higher operating pressure. Studies have proved that the alteration of membrane properties is the key controlling factor in lessening membrane fouling. Among stimuli-responsive membranes, thermo-responsive membrane is the most popular, with a drastic phase transition and swelling-shrinking behavior caused by the temperature change. In this study, the thermo-responsive ability of two commercial membranes, PolyCera® Titan membrane and PolyCera® Hydro membrane, at different temperatures was studied on the antifouling function of the membrane in palm oil mill effluent (POME) treatment. The evaluation of the membrane's thermo-responsive ability was done through three cycles of adsorption (fouling) and desorption (defouling) processes in a membrane filtration process. The experimental result depicted that PolyCera® Hydro membrane had a higher membrane permeability of 67.869 L/㎡.h.bar than PolyCera® Titan membrane at 46.011 L/㎡.h.bar. However, the high membrane permeability of PolyCera® Hydro membrane was compensated with low removal efficiency. PolyCera® Titan membrane with a smaller mean pore size had better rejection performance than PolyCera® Hydro membrane for all tested parameters. On the other hand, PolyCera® Titan membrane had a better hydrodynamic cleaning efficiency than PolyCera® Hydro membrane regardless of the hydrodynamic cleaning temperature. The best hydrodynamic cleaning performed by PolyCera® Titan membrane was at 35℃ with the flux recovery ratio (FRR) of 99.17 ± 1.43%. The excellent thermo-responsive properties of the PolyCera® Titan membrane could eventually reduce the frequency of membrane replacement and lessen the use of chemicals for membrane cleaning. This outstanding exploration helps to provide a solution to the chemical industry and membrane technology bottleneck, which is the membrane fouling, thus reducing the operating cost incurred by the membrane fouling.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.194-195
• /
• 2012

• 복식
• /
• 제52권3호
• /
• pp.19-27
• /
• 2002

This paper surveys the mordanting and dyeing properties of Sophora japonica L. Appropriate extraction, dyeing and mordanting condition of Sophora japonica L. were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of Sophora japonica L. solution was 367.6mn, rutin solution was 365.6mn. The color of Sophora japonica L. solution was affected at pH 2 and pH 8~9. The optimum temperature to extract Sophora japonica L. was during 1 hour in 8$0^{\circ}C$. The effective dyeing temperature and time of silk were 10$0^{\circ}C$, 60min. K/S value of dyeing fabrics was increased by pre-mordanting treatment, especially Fe, Sn, Cr. In the case of Sophora japonica L. light fastness was increased by Fe mordanting. Perspiration fastness was better in acidic solution than that in alkaline solution. Fastness to rubbing and dry-cleaning were good in general.

• 한국재료학회지
• /
• 제20권3호
• /
• pp.167-173
• /
• 2010

In this study, we used activated carbon (AC) and titanium oxysulfate as a titanium precursor to prepare carbon/titania composites. We then mixed it with bentonite in different ratios to make a carbon/titania/bentonite monolith for use in architecture bricks by using Phenolic rosin (PR) as a bonding agent. The physicochemical properties of the prepared composites were analyzed by BET surface area, scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX), self-cleaning effect and bactericidal tests. The BET surface areas increased as the ratio of carbon/titania composites increased. The SEM microscopy showed that the $TiO_2$ and bentonite were coated on the surface of the AC. The XRD patterns showed a mixture structure of anatase and rutile of $TiO_2$ with a clear $SiO_2$ structure. The EDX spectra of the carbon/titania/bentonite monolith confirmed the presence of various elements, namely C, O, Ti and Si, as well as other, impure elements. Moreover, to determine the self-cleaning effect of the carbon/titania/bentonite monolith, we used methylene blue (MB, $C_{16}H_{18}N_3S{\cdot}Cl{\cdot}3H_2O$) in an aqueous solution under the irradiation of visible light. Accordingly, all of the samples had excellent degradation of the MB solution. Furthermore, it was observed that the composites with sunlight irradiation had a greater effect on E. coli than any other experimental conditions.

• 한국CDE학회논문집
• /
• 제16권1호
• /
• pp.61-72
• /
• 2011

As the customer's needs for diverse colors, the process of bus painting shop is becoming more and more complex. In particular, frequent changes of paint colors in each spray process require the cleaning of the painting nozzles and setting them up for the new paints, which results in increased time and cost and reduced production. This also increases environmental influences. This paper proposes, as a solution to this issue, the use of color selection field (CSF). CSF is physically a system of conveyors that are used to rearrange objects in a flow line. CSF is proposed, in this paper, to be introduced right before the spray process so that buses are better grouped according to their desired colors. Various parameters of the CSF, such as the number of conveyors and algorithms to determine the rearranged sequence of buses, have been determined by running simulations using the digital manufacturing technology, and investigating the simulation results. As an outcome of the proposed solution, the CSF system is expected to reduce approximately 30% of the nozzle cleaning cost for a Korean motor company case, which will not only benefit the company economically, but will also benefit the environment.

• 한국염색가공학회지
• /
• 제10권4호
• /
• pp.1-6
• /
• 1998

It is important in the durable water and oil repellent finishing for wool fabric what kinds of water-repellent agents will be used. Water repellent agents and its concentration were aleady chosen in the previous paper, one of the crosslinking agents which has less damages(harsh handle or yellowing) to the treated fabrics was a low molecular weight urethane-based resins(eg. Elastron BN-11). In repellent finishing, fabrics were padded in a bath which contained aqueous solution of water-repellent agents, and crosslinking agents, and wetting agents, followed by drying and curing. The most suitable treating condition for excellent repellency and durability to dry-cleaning was as follows ： Fabrics are padded at liquor pick-up ratio of 50%, with aqueous solution which contained $30g/\ell$ of water-repellent agents, and $1g/\ell$ of crosslinking agents, and 40g/s of wetting agents. And the padded fabrics were dried at $110^\circ{C}$ for 1 minute, and cured at $160^\circ{C}$ for 1 minute. For the fabrics, water and oil repellencies and durability to repeated dry-cleanings were observed. For enhancing the durability to dry-cleaning, the role of crosslinking agents was important for they bonds water-repellent agents and fibers to 3-dimensional net structure. Therefore, the most suitable drying and curing conditions should be selected according to the kinds of crosslinking agents.

• 한국재료학회지
• /
• 제17권3호
• /
• pp.125-131
• /
• 2007

[ $TiO_{2}-solution$ ] was aaded in $SiO_{2}-solution$ by various composition. $SiO_{2}-TiO_{2}$ thin films were obtained by the dip-coating method on the $SiO_{2}$ glass substrates, and then heat-treated at various temperature. Nano-size $TiO_{2}$ particles dispersed $SiO_{2}-TiO_{2}$ films showed absorption peak by quantum size effect at short wavelength region $350{\sim}400nm$, which made them good candidates for non-linear optical materials and photo-catalytic materials. The thickness of $SiO_{2}-TiO_{2}$ films were $300{\sim}430nm$. The contact angle of $SiO_{2}-TiO_{2}$ films for water was $5.3{\sim}47.9^{\circ}$, and therefore it is clear that $SiO_{2}-TiO_{2}$ films have super hydrophilic properties and the self-cleaning effects.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.824-830
• /
• 2006

Several tests were conducted to optimize the design parameters of ln-situ soil flushing processes for diesel contaminated soil. According to the batch extraction test for three anionic surfactants evaluation, Calgonit limiting bubble occurrence was selected for its higher oil cleaning efficiency. After optimum surfactant selection, there were many sets of column flushing test. Over 70% of BTEX was removed in this surfactant dose with 400% of soil volume. In the case of no surfactant addition flushing in column, so called "blank flushing test", BTEX removal rate was 64%. But when we reused the effluent for the cleaning solution, the removal rate was decreased to 46.9%. This result showed reabsorption of oil occurred on the soil. With the addition of Calgonit solution to the diesel contaminated column, BTEX was removed up to 98.9% during the first flushing and 99.4% for the second recirculation flushing. In microcosm tests, diesel contaminated soils were cleaned by both surfactant flushing and biological activities. In anoxic condition, nitrate was used as an electron acceptor while the surfactant and the oil were used an electron donor. BTEX removal efficiency could be achieved up to 80% by biological degradation.

• Restorative Dentistry and Endodontics
• /
• 제17권2호
• /
• pp.413-420
• /
• 1992

The purpose of this study was to compare the effectiveness of hand instrumentation with K - file and ultrasonic instrumentation and irrigation system in removing pulpal debris and canal wall planing. 20 mandibular molar teeth were instrumented to size 30 K - file and 20 teeth were instrumented with ultrasonic Suprasson. And Normal Saline and 2.5% NaOCl were used as irrigation solution. All specimens were viewed at the coronal, middle, and apical third of the root canals for the evaluation of the cleaning effect under the multiview microscope. The result were as follows : 1. All of the technique and irrigation solution was effecient in the debris removal and canal wall planing at the cervical and middle thirds of the root canal. 2. All of the techniques and irrigation solutions was less efficient in the debris removal and canal planing at the apical third of the root canal. 3. The debris removal and canal wall planing was depended more on the anatomical variations of the root canal than on the techniques and irrigation solutions.