• Journal of Environmental Health Sciences
• /
• v.46 no.5
• /
• pp.504-512
• /
• 2020

Objective: The purpose of this study was to evaluate the indoor to outdoor ratio (I/O ratio) of time activity patterns affecting PM_2.5 concentrations in homes in Korea through a simulation. Methods: The time activity patterns of homemakers were analyzed based on the 'Time-Use Survey' data of the National Statistical Office in 2014. From September 30 to October 2, 2019, the experimenter lived in multifamily housing located in Guro-gu, Seoul. The I/O ratio of PM_2.5 concentration was measured by installing sensor-based instruments. Results: The average indoor and outdoor PM_2.5 concentrations during the three days were 33.1±48.9 and 45.9±25.3 ㎍/㎥, respectively. The average I/O ratio was 0.75±0.60. The indoor concentration tended to increase when PM_2.5 source activity such cooking and cleaning was present and outdoor PM_2.5 was supplied through ventilation. Conclusions: This study could be used as basic data for estimating indoor PM_2.5 concentrations with personal activity pattern and weather conditions using outdoor concentrations.

• Fashion & Textile Research Journal
• /
• v.2 no.4
• /
• pp.331-338
• /
• 2000

To study on the actual condition of care label attached to clothing and consumers' perception, 250 summer clothes sold at department store-blouse, trousers, one-piece dress, knit cardigan and skirt-were investigated during July 2000. In addition, a questionnaire was administered to 192 women in Taegu during August. The fiber contents of surveyed clothes were polyester 100% & polyester blend (26%), rayon 100% & rayon blend (18%), cotton 100% & cotton blend (17%), wool 100% & wool blend (14%) and others. All clothes surveyed were attached care label and the signals showed on care labels were 4~6 kinds about cleaning, squeezing, drying, bleaching, and ironing methods. 92% of clothes had to be dry-cleaned and only 8% could be wet-cleaned. Considered the surveyed clothes were for summer which needs frequent washing and the clothing items, the number of clothes had to dry-cleaned were too many. The bleaching instructions were no chlorine bleach (74%), no bleaching (21%) and others. The ironing instructions were cool ironing ($80{\sim}120^{\circ}C$) with cover (24%) and warm ironing ($140{\sim}160^{\circ}C$) with cover (69%) primarily. The drying instructions was dry on a hanger in the shade (54%) and 38% had no signal or incorrect signal. The properties of summer clothes considered important by consumers were wrinkled hardly, hand-washable, machine-washable, needed no iron and etc. Actually most of summer clothes were hand or machine-washed. Also, the majority of respondents felt inconvenient to have to dry-clean summer clothes. More than 80% respondents looked over care label and fiber content label before buying clothes. However most of respondents did not followed that instructions exactly and thought care label instructions were not correct. Considered this results, the suppliers have to make efforts to attach correct and appropriate care label which furnish the correct information to consumers.

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.375-387
• /
• 2007

The Iksan Mireuksaji stone pagoda, designated as national treasure No. 11 in Korea, has been in the process of disassembling for reconstruction as part of the cultural heritage conservation program. The pagoda is mainly consisting of granite, which is relatively resistant to weathering. However, it has lost its original rock color due to various contaminants deposited at the surface since it exposed to the atmospheric environment long time. In this research, we categorized the secondary inorganic contaminants into the genetic type, and also quantitatively examined occurrences and types of pollutants in the oxidation area of the pagoda surface in which the area is clearly distinguished by naked eyes. Geochemical behavior of soluble pollutants through reaction experiments are demonstrated, and effective methods of cleaning for the conservation and scientific applicability of the surface cleaner are also studied.

• Journal of Korean society of Dental Hygiene
• /
• v.20 no.1
• /
• pp.53-62
• /
• 2020

Objectives: The purpose of the study was to analyze the association between dyslipidemia and periodontitis in Korean adults aged 30 and older. Methods: We examined 3,992 subjects participating in the 2015 Korean National Health and Nutrition Examination Survey. Periodontal status was evaluated using the community periodontal index (CPI). People with 3 or 4 CPI codes were classified as the periodontitis group. For statistical analyses, chi-square test and logistic multiple regression were used. Results: The prevalence of periodontitis was higher in men, people aged 70 and over, people whose income status was among the lower 25%, and people whose educational level was high school or lower (p<0.001). The prevalence of periodontitis was higher in people who brushed their teeth twice or less, those who did not use interdental cleaning devices, those who did not have a dental checkup in the last 12 months, and those who had not drunk or smoked (p<0.05). The prevalence of periodontitis was increased with individuals whose BMI was ≥25 kg/㎡, those whose glycated hemoglobin was ≥6.5%, and whose lipid levels were higher or lower than the normal range. In the logistic regression model, an increase in triglyceride was found to increase the prevalence of periodontitis (p<0.05). Conclusions: The study suggests that dyslipidemia, especially hypertriglyceridemia, is a predictor of periodontitis.

• Korean Journal of Digital Imaging in Medicine
• /
• v.3 no.1
• /
• pp.126-132
• /
• 1997

Purpose : To apply to Program of Auto processor quality control after comparison of Film density variations with amendments to Auto density by using Check density program and Adjust density program of calibration mode into the Laser imager. Methods : Observe Check and Adjust density variations on the Control chart with standard step and value during seven months from December, 1995 to June, 1956 extending twice a week. (1) Measure density value on the steps after printing out 17-step sensitometric pattern of the Check density program. (2) In the same way, measure density values after amending density by using Adjust density program If they are exceeding allowable error limit. Results : In case of Check density program, the exceeding limit rates of Density difference(DD) and Middle density(MD) are: FL-IM3543 DD=75%. MD=72.5%, FL-IMD DD=0%. MD=30.8%(14.5%) After amending density by using Adjust density program, the exceeding limit rates of all both Laser imager were zero percent. The standard deviations are show lower FL-IM D than FL-IM3543 on the Check density control chart, but higher on the Adjust density control chart. Conclusion : (1) Check density variations by printingout sensitometric pattern extending once a week at least for quality control of the Laser imager. (2) In case of a dusty place, check the Laser beam transmission after cleaning Laser optical unit extending once a month. (3) Be sure to measure and check density values by using adjust density program if they are exceeding allowable error limit. (4) Maintain much better film density by performing the adjust density program even if check density values are existed within normal limit.

• Fashion & Textile Research Journal
• /
• v.11 no.6
• /
• pp.953-960
• /
• 2009

The natural dyeing of fabrics with myrobalan extract was investigated. After dyeing of silk, cotton and rayon with myrobalan extract, the dyeability of myrobalan extract was evaluated with the conditions of concentration, temperature, time, repeat-numbers, pH, mordants variables, the changes of dyeability and surface colors by methods of mordanting and color fastness. The wavelength of maximum absorption of the colored solution from myrobalan extract appeared at 272 nm. Therefore, the substance of myrobalan extract was verified as tannin dyes. The optimum dyeing of fabrics was carried out at 30%(o.w.f) dye concentration. Silk fabrics dyed with myrobalan extract showed the highest K/S value at the temperature of $80^{\circ}C$ when it was dyed for seventy minutes, while cotton and rayon fabrics showed the highest K/S value at the temperature of $90^{\circ}C$ when they were dyed for seventy minutes and thirty minutes, respectively. Dyeing operation was carried out in acidic dyebath of pH 3. The K/S value of silk fabric was higher in pre-mordant stage than in post-mordant, while the K/S values of cotton and rayon fabrics were higher in post-mordant stage. The surface colors of dyed fabrics were different according to used mordants: Al and Cu mordanted fabrics were dyed in yellowish colors, while Fe mordanted fabric was dyed in khaki-black color. Light-fastness of the color fastness was improved in Fe-mordant. Washing-fastness was relatively good, and dry cleaning-fastness of dyed fabrics was excellent.

• Fashion & Textile Research Journal
• /
• v.19 no.3
• /
• pp.337-343
• /
• 2017

The purpose of this study is to investigate the optimal dyeing conditions and human-friendly properties of the extract from the branches of Alnus firma tree which is widely used for forestation and to provide basic information for quantification and commercialization of natural dyeing by discovering such as dye material. The optimal dyeing conditions, as a result, were shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 40 minutes of dyeing time. In terms of dye uptake depending on the mordanting methods, it showed the best result in order of Fe, Sn, Cu and Al at pre-mordanting while found strong in order of Fe, Cu, Al and Sn at post-mordanting. Color fastness to washing and dry cleaning was found strong at grade 4-5 and fastness to light was rated at 2. The grade of change in color to rubbing and perspiration was good at 4-5. In aspects of functional properties, it showed excellent results of 98% deodorization rate at 120 minutes of dyeing time, 96.1% UV protection rate and 99.9% bacterial reduction against Staphylococcus aureus and Klebsiella pneuminiae. It is considered, therefore, the extract from Alnus firma tree is of great value as an eco-friendly natural dyestuff.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.41-49
• /
• 2013

Objectives: The purpose of this study was to clarify the association between serum carcinoembryonic antigen (CEA) and type of work in the shipbuilding industry. Methods: 1,072 final study subjects were admitted to a general hospital from April through July 2010 for the purpose of medical examination. Data on general characteristics such as age, smoking history, alcohol history and exercise habits was gathered through structured self-administered questionnaires. Information on job factors was collected from a medical examination, by interview and through company personnel data. Serum CEA levels were measured after eight hours' fasting and were analyzed by a radioimmunoassay. Results: On univariate analysis, the mean serum CEA level was significantly higher among married (p=0.02), older age (p<0.01), longer work time (p<0.01), smokers (p<0.01), lower education (p<0.01), and indirect and direct exposure groups (p<0.01). On multiple regression analysis, serum CEA level was influenced by smoking (p=0.001), duration of work (p=0.019), and direct exposure group (p<0.001). However, among the direct exposure group, serum CEA level was not significantly different between welding, mounting, electro-device constructive work, grinding and cleaning, and painting. Conclusions: The goal of this research was to determine if there were differences between serum CEA levels according to occupational role among shipyard workers. The direct exposure group of shipyard workers had a relatively higher level of serum CEA than did the indirect exposure group and office workers, most likely due to occupational exposure.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.2
• /
• pp.108-116
• /
• 2013

BACKGROUND: Certain crop-based waste materials have been recognized as cost-effective and highly efficient adsorbents for removal and recovery of different kind of heavy metals from aqueous solutions. The ability is strongly attributed to the carboxyl functional group of some pectin substances such as galacturonic acid often found in fruit peels. The present manuscript was aimed at assessing the potential applicability of banana peel for metal removal from contaminated waters. METHODS AND RESULTS: As revealed by laboratory investigations, banana peel contains pectin (10-21%), lignin (6-12%), cellulose (7.6-9.6%), and hemicelluloses (6.4-9.4%). The pectin extraction is reported to have glucose, galactose, arabinose, rhamnose, xylose, and galactouroninc acid. Several studies conducted under different conditions proved that banana peel is capable of adsorbing 5.71, 2.55, 28.00, 6.88, 7.97, and 5.80 mg/g of $Cd^{2+}$, $Co^{2+}$, $Cu^{2+}$, $Ni^{2+}$, $Pb^{2+}$, and $Zn^{2+}$, respectively, from aqueous solutions. Adsorption capacity is, however, dependent upon several factors including solution pH, dose of adsorbent and metal concentration, contact time and shaking speed. CONCLUSION(S): Since the annual world production of banana exceeds 100 million tons, about 40 million tons of banana peel (40% of total weight of the fresh fruit) remains vastly unused. Exploring a sound technology with banana peel would therefore, not only address the much needed sustainable tool for cleaning contaminated waters, but of course bring an additional value to the banana industry worldwide.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2300-2305
• /
• 2010

This study was performed about color-contained mud to provide fun and diversity for the event of mud self massage as a core program of Boryeong Mud Festival which has become one of representative festivals in Korea. Adjusting its own lower brightness of mud and based on the primary study performed about the expressivity of yellowish colors, inorganic colors (oxidized steel in red, ultra marine pink, ultra marine blue, chrome oxide green) were added for the development of colored mud in diverse colors on the basis of Korean traditional colors. It had been judged about each expressivity of color by methods of colormeter, naked eyes inspection and feeling of usage, etc. For the color decided, it had been examined about the coloring when it got wet with the cleaning condition so that it can be used for the event of mud self massage as a program of Boryeong Mud Festival to increase diversity of the Festival and also attempted to develope colored mud to show Korean traditional colors.