• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.8-18
• /
• 2023

Increasing of energy demand due to the rapid growth of global population and the development of world economy has inevitably resulted in the continuously increase of fossil fuel usage in the world. However, highly dependence on fossil fuels has necessarily brought about critical environmental issues and challenges such as severe air pollutions and rapid global warming. In order to settle these environmental and energy problems, clean energy generations in the conventional combustion processes have widely adapted in the world. In particular, novel thermochemical conversion processes such as pyrolysis and gasification have rapidly been applied for generating clean energy. Fluidized bed technologies having advantages such as various fuel use, easy continuous operation, high heat and material transfer, isothermal operation, and lower operation temperature are widely adopted and used because they are suitable for thermochemical energy conversion. The latest research trends and important findings in the thermo-chemical conversion process with fluidized bed technologies are summarized in this review. Also, the need for research such as layered materials and substances to reduce fine dust (biomass, natural resource waste, etc.) was suggested. Through this, it is intended to increase interest and understanding in fluidized bed technology and to present directions for solving future challenges in fluidized bed process technology development.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.989-997
• /
• 1994

The major objective of this study is to develop an effective method to estimate ${\alpha}$ and ${\beta}$ in an aeration basin at a conventional activated sludge wastewater treatment plant. A series of unsteady state batch tests were simultaneously performed with clean water and mixed liquor in two batch reactors under identical operational conditions. Oxygen uptake rates (OURs) of the mixed liquor were measured during the tests. The results show that the OURs due to synthesis respiration and endogenous respiration were averaged about $17.96 mg/(l{\cdot}hr)$ and about $12.29mg/(l{\cdot}hr)$, respectively. The corresponding ${\alpha}$ and ${\beta}$ were ranged between 0.65 to 0.95, and between 0.88 to 0.93, respectively. Based on the overall experimental results, the proposed experimental test method and the proposed method for determination of ${\alpha}$ and ${\beta}$ are found to be relatively simple and easy to use in evaluating the characteristics of aeration systems.

• Journal of Preventive Medicine and Public Health
• /
• v.53 no.4
• /
• pp.289-292
• /
• 2020

Yemen has been faced with the worst cholera epidemic of modern times, with more than 1 million suspected cases and 3000 deaths at the time of writing. This problem is largely due to the longstanding civil war between pro-government forces and the Houthi armed movement, which has severely damaged already vulnerable sanitation and healthcare facilities and systems in the country. It is further compounded by a dire lack of basic amenities, chronic malnutrition, and unfavourable weather conditions. Another contributory component may be aerial transfer by cholera-infected chironomid insects. To contain the spread of cholera in Yemen, a nation-wide armistice should be negotiated, and national and local committees must be convened to coordinate efforts on the ground. Community isolation facilities with proper sanitation, reliable disposal systems, and a clean water supply should be set up to isolate and treat sick patients. The continuity of vaccination programmes should be ensured. Public health campaigns to educate local communities about good hygiene practices and nutrition are also necessary. The One Health paradigm emphasizes a multi-sectoral and transdisciplinary understanding and approach to prevent and mitigate the threat of communicable diseases. This paradigm is highly applicable to the ongoing cholera crisis in Yemen, as it demands a holistic and whole-of-society approach at the local, regional, and national levels. The key stakeholders and warring parties in Yemen must work towards a lasting ceasefire during these trying times, especially given the extra burden from the mounting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) outbreak worldwide.

• Korean Journal of Materials Research
• /
• v.22 no.3
• /
• pp.130-135
• /
• 2012

We present a method of graphene synthesis with high thickness uniformity using the thermal chemical vapor deposition (TCVD) technique; we demonstrate its application to a grid supporting membrane using transmission electron microscope (TEM) observation, particularly for nanomaterials that have smaller dimensions than the pitch of commercial grid mesh. Graphene was synthesized on electron-beam-evaporated Ni catalytic thin films. Methane and hydrogen gases were used as carbon feedstock and dilution gas, respectively. The effects of synthesis temperature and flow rate of feedstock on graphene structures have been investigated. The most effective condition for large area growth synthesis and high thickness uniformity was found to be $1000^{\circ}C$ and 5 sccm of methane. Among the various applications of the synthesized graphenes, their use as a supporting membrane of a TEM grid has been demonstrated; such a grid is useful for high resolution TEM imaging of nanoscale materials because it preserves the same focal plane over the whole grid mesh. After the graphene synthesis, we were able successfully to transfer the graphenes from the Ni substrates to the TEM grid without a polymeric mediator, so that we were able to preserve the clean surface of the as-synthesized graphene. Then, a drop of carbon nanotube (CNT) suspension was deposited onto the graphene-covered TEM grid. Finally, we performed high resolution TEM observation and obtained clear image of the carbon nanotubes, which were deposited on the graphene supporting membrane.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.9
• /
• pp.1318-1328
• /
• 2011

The tropics is not an ideal location for calf rearing as the high temperatures and humidities introduce many potential disease problems to milk fed calves. In addition, the type of dairy farming (generally poorly resourced small holder farming) and the general lack of awareness of the long term implications of poorly reared stock do not encourage farmers to pay close attention to their calf and heifer rearing systems. Surveys of calf rearing systems in Asia, tropical Africa and South America highlight the high calf and heifer mortalities. A range of 15 to 25% pre-weaning calf mortality is typical on many tropical dairy farms. It is often as high as 50%, indicating very poor calf management. This contrasts with US findings of less than 8% mortality from birth to 6 months while surveys of Australian farmers report only 3% losses. Simple extension programs on farms in Sri Lanka and Kenya have drastically reduced calf mortalities and improved pre-weaning growth rates. Improved management strategies leading to lower calving intervals, higher calving rates, reduced still born and pre-weaned calf mortalities and fewer non pregnant heifers can supply many more dairy herd replacements than currently occurs. Such strategies can increase the number of replacement heifer calves in the herd from 15 to over 35%, thus allowing farmers to increase their herd sizes through natural increases. Simple management procedures such as ensuring adequate intake of good quality colostrum within the first 12 hours of life, housing and good hygiene to minimise disease transfer, providing clean drinking water, developing appropriate feeding protocols to encourage early rumen development and paying closer attention to climate control and animal health can all lead to improved calf vigour and performance. Good record keeping is also important so farmers can more easily identify susceptible calves and quickly treat potential problems.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.849-855
• /
• 2012

The effect of electric fields on the response of diffusion flames in a counterflow has been investigated experimentally by varying the AC voltage and frequency. The result showed that the flame was stationary with high AC frequency above the threshold frequency, and it increased with the applied voltage and then leveled off at 35 Hz. Below the threshold frequency, however, the flame oscillated with a frequency that was synchronized with the applied AC frequency. This oscillation can be attributed to the ionic wind effect due to the generation of bulk flow, which arises from the momentum transfer by molecular collisions between neutral molecules and ions, where the ions in the reaction zone were accelerated by the Lorentz force.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.2
• /
• pp.110-122
• /
• 1999

Hot-wire anemometers are most commonly used in measuring hood capture velocities due to their accuracy and convenience. But it was questionable that the anemometers being used in the field are accurate enough for the purpose of measurements. To answer this ques tion, a calibration wind tunnel was newly devised and tested. Subsequently, 53 hot-wire anemometers being currently used in the field were tested to evaluate the accuracy of anemometers. The average error was 16.93% while the average errors in the low (0.5~5m/s) and high (5~20m/s) velocity range were 17.40% and 16.45%, respectively. Most of anemometers underestimated the true velocities. It might be due to the contamination of hot-wire, resulting in the slow heat transfer between the sensor and air flow. Astonishingly, 16 of 53 anemometers were out of order due to the malfunctioning of zero adjustment control, power supply, display panel and sensor. It is desirable to calibrate periodically and clean the sensor after using in the dirty environment.

• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.158-164
• /
• 2018

Multi-walled carbon nanotube (MWCNT)-copper (Cu) composites are successfully fabricated by a combination of a binder-free wet mixing and spark plasma sintering (SPS) process. The SPS is performed under various conditions to investigate optimized processing conditions for minimizing the structural defects of CNTs and densifying the MWCNT-Cu composites. The electrical conductivities of MWCNT-Cu composites are slightly increased for compositions containing up to 1 vol.% CNT and remain above the value for sintered Cu up to 2 vol.% CNT. Uniformly dispersed CNTs in the Cu matrix with clean interfaces between the treated MWCNT and Cu leading to effective electrical transfer from the treated MWCNT to the Cu is believed to be the origin of the improved electrical conductivity of the treated MWCNT-Cu composites. The results indicate the possibility of exploiting CNTs as a contributing reinforcement phase for improving the electrical conductivity and mechanical properties in the Cu matrix composites.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.760-770
• /
• 2008

Though flash images are in general less noisy and present details better than no-flash images, they may sometimes be unnaturally saturated to white/gray-tone and have ridiculously strong shadows around the foreground objects due to the strong flashlight. In this paper, we propose a new algorithm to improve the color quality of the flash images by transfer of the color information of the same-scene no-flash images. The proposed algorithm preserves the vivid edges and the clean details of the flash image while transferring natural colors of the no-flash image, so that it makes the constructed images of the better subjective quality. The performance of the proposed algorithm is verified by experiment which applied to the two types of images with different noise levels.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.141-151
• /
• 2013

This study presents a modeling of aerosol extinction vertical profiles in Korea by using the Moderate Resolution Imaging Spectro-radiometer(MODIS) derived aerosol optical thickness(AOT) and ground based visibility observation data. The method uses a series of physical equations for the derivation of aerosol scale height and vertical profiles from MODIS AOT and surface visibility data. The modelled results under the standard atmospheric condition showed small differences with the standard aerosol vertical profile used in the radiative transfer model. Model derived aerosol scale heights for two cases of clean(${\tau}_{MODIS}=0.12{\pm}0.07$, visibility=$21.13{\pm}3.31km$) and hazy atmosphere(${\tau}_{MODIS}=1.71{\pm}0.85$, visibility=$13.33{\pm}5.66km$) are $0.63{\pm}0.33km$ and $1.71{\pm}0.84km$. Based on these results, aerosol extinction profiles can be estimated and the results are transformed into the KML code for visualization of dataset. This has implications for atmospheric environmental monitoring and environmental policies for the future.