• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1313-1323
• /
• 2004

In accordance with adoption of new convention for the control of ship's ballast water at the diplomatic conference held in London Feb, 2004, every country has to regulate the ballast water and deposit matters. When this Resolution comes into effect in 2009, all vessels engaged in international voyage must have ballast water control program, ballast water records, equipments which are suitable to the standard of exchange and performance for the ballast water. This study estimates objectively their performances, merits and demerits of the ballast water treatment technique and exchanging techniques for safe operation of ships. It is desirable to design an equipment to control the ballast water using the brush-type vacuum suction nonstop reverse cleaning system to overcome the clogging phenomenon and the direct disc filtering to maximize filtering area for the optimum process considering biological availabilities. It will be expected to protect against marine pollution and to maintain clean sea if it is secured to develop new ballast water treatment techniques. And it will also be expected to cope with the Resolution and each regulation of the developed countries from the ballast water.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.209-213
• /
• 2006

In this paper describes image enhancement technique using deconvolution processing for ultrasonic nondestructive testing. . When flaws are detected for B-scan or C-scan, blurring effect which is caused by the moving intervals of transducer degrades the quality of images. In addition, acquisited images suffer form speckle noise which is caused by the ultrasonic components reflected from the grain boundary of material [1,2]. The deconvolution technique can restore sharp peak value or clean image from blurring signal or image. This processing is applied to C-scan image obtained from known specimen. Experimental results show that the deconvolution processing contributes to get improved the quality of C-scan images.

• Smart Structures and Systems
• /
• v.8 no.2
• /
• pp.191-204
• /
• 2011

A technique for damage localization and assessment based on measurements of both eigenvectors curvatures and eigenfrequencies is proposed. The procedure is based on two successive steps: a model independent localization, based on changes of modal curvatures, and the solution of a one-dimensional minimization problem to evaluate damage intensity. The observability properties of damage parameters is discussed and, accordingly, a suitable change of coordinates is introduced. The proposed technique is illustrated with reference to a cantilever Euler beam endowed with a set of piezoelectric transducers. To assess the robustness of the algorithm, a parametric study of the identification errors with respect to the number of transducers and to the number of considered modal quantities is carried out with both clean and noise-corrupted data.

• Journal of ILASS-Korea
• /
• v.27 no.3
• /
• pp.126-133
• /
• 2022

The objective of this is to experimentally investigate the effect of mixed jet on the oxygen transfer characteristics with the primary nozzle area ratio of an annular nozzle ejector for the application of a microbial fuel cell. A direct visualization method with a high speed camera system was used to capture the horizontal mixed jet images, and a binarization technique was used to analyze the images. The clean water unsteady state technique was used for the oxygen transfer measurement. The air-water mixed jet discharging into a water tank behaved similar to a buoyancy or horizontal jet with the primary nozzle area ratio. It was found that an optimum primary nozzle area ratio was observed where the oxygen transfer performance reached its maximum value due to the decrease of air volume fraction and the increase of jet length and air bubble dispersion.

• Clean Technology
• /
• v.9 no.4
• /
• pp.153-161
• /
• 2003

This study was carried out as a basic experiment for development of adsorption process in which benzene and toluene was adsorbed on activated carbon. In the static adsorption experiment, Adsorption character of benzene and toluene was studied by change of temperature and pressure. Activated carbon 12~20mesh and activated carbon 20~40mesh was used as adsorbents, Benzene, toluene and nitrogen as adsorbates. Experimental data were obtained to fitted to Langmuir isotherm and dependence was acquired. Parameters of adsorption heat and adsorption constant was obtained. Static adsorption experiment for binary mixtures confirmed that Langmuir isotherm parameters could be applicable to Extended Langmuir isotherm. Experimental technique used in this study only requires pressure measurement and this technique is different from the conventional method which measures gas mole compositions before adsorption and after adsorption. The dynamic adsorption experiment was carried out and the experimental results was compared with the computer simulation results. In this study, basic data was acquired to decide adsorption conditions in the process.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.3
• /
• pp.237-246
• /
• 1994

Experimental data are reported for charging and collection of NaCl aerosols in the 0.03- to $0.2{\mu}m$-geometric-mean-diameter range in 2-stage parallel-plate electrostatic precipitators. The NaCl aerosols are generated with geometric standard deviation of about 1.74 and particle generation rate of about 10^9 particles/see by the constant output atomizer and injected into the air flow in the clean wind-tunnel. The 2-stage parallel-plate electrostatic precipitator installed in the test section of the wind-tunnel is operated with a positive corona discharge. The NaCl aerosols in the channel flow are sampled and transported to the aerosol particle number concentration measurement system by using the isoaxial sampling and transport system constructed based on the Okazaki and Willeke design. The aerosol particle number concentration measurement system measures the size distribution of submicrometer aerosols by an electrical mobility detection technique. It is confirmed from comparing the measured collection efficiencies in this study and the predicted ones by our previous theoretical analysis that the predicted collection efficiencies agree well with the experimental ones. It is also found from the comparison that below about $0.02{\mu}m$ all particles are not charged and the uncharged particles are not collected, and consequently 2-stage parallel-plate electrostatic precipitators are not suitable for that particle size range.

• Journal of Internet Computing and Services
• /
• v.15 no.6
• /
• pp.55-64
• /
• 2014

In a Web application, you can pass without restrictions special network security devices such as IPS and F/W, URL parameter, which is an important element of communication between the client and the server, is forwarded to the Web server. Parameters are modulated by an attacker requests a URL, disclose confidential information or through e-commerce, can take financial gain. Vulnerability parameter manipulation thereof cannot be able to determine whether to operate in only determined logical application, blocked with Web Application Firewall. In this paper, I will present a technique OTACUS(One-Time Access Control URL System) to complement the shortcomings of the measures existing approaches. OTACUS can be effectively blocked the modulation of the POST or GET method parameters passed to the server by preventing the exposure of the URL to the attacker by using clean URL technique simplifies complex URL that contains the parameter. Performance test results of the actual implementation OTACUS proves that it is possible to show a stable operation of less than 3% increase in the load.

• Clean Technology
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2011

This study presents a fabrication method of cell-chip using aqueous solution based surface modification. The applications of cell-chip have potential for fundamental study of genetics, cell biology as well as cancer diagnostics and treatment. Conventional methods for fabrication of cell-chip have been limited in economic loss and environmental pollution because of the use of harsh organic solvent, complex process of silicon technology, and expensive equipment. In order to fabricate cell chip, we have proposed simple and eco-friendly process combined polyelectrolyte multilayer coating with microcontact printing. For the proof of concept, the cell chip can be applied to analyze the different expression of cell surface glycans and derivatives between cancer and normal cells. Our proposed method is useful technique for the application of novel cancer diagnostics and basic medical engineering.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.5
• /
• pp.377-385
• /
• 2008

In this study, we demonstrated that, although hydrogen molecules can be adsorbed onto the adsorbent such as MOF and MC itself, the loading of noble metal such as Pt is necessary to enhance the $H_2$ storage capacity since $H_2$ molecules can be dissociatively adsorbed on Pt metal and migrated to high-surface-area adsorbent via the primary spillover. In addition, the hybrid material have been prepared coupling MOF-5 with Pt/MC through carbon bridges formed by sucrose polymerization/carbonization. That this material showed the highest $H_2$ uptake at room temperature and about 100 bar is believed to be associated with the secondary spillover effect. Thus, such a strategy is very promising in developing $H_2$ storage technology using porous adsorbents. However, further experiments should be carried out to explore the choice of bridge carbon, the hybridization method, the dispersion technique of noble metals, etc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.928-935
• /
• 2013

This paper proposed a combining technique of feature vectors which improves the performance of radar target recognition. The proposed method obtains more information than monostatic or bistatic case by combining extracted feature vectors from two receivers. For verifying the performance of the proposed method, we calculated monostatic and bistatic RCS(BRCS) of three full-scale fighters by changing the receiver position. Then, the scattering centers are extracted using 1-D FFT-based CLEAN from the calculated RCS data. Scattering centers are used as feature vectors for neural network classifier. The results show that our method has the better performance than the monostatic or bistatic case.