• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.1
• /
• pp.35-42
• /
• 2013

This paper shows the positivistic approach for analyzing the effect of ICT on the reduction of greenhouse gas (GHG) emission. The real-time navigation was selected for the ICT based service in this research, and the CO2 reduction ratios of the optimized routes in the navigation were compared with the reduction ratios of the shortest routes in existing navigations. The results of experiments showed the driving based on the optimized routes has more reduction effects than the driving on the basis of the shortest routes. Also, new evaluation method for GHG emission was suggested by the quantification and monitoring approaches on the basis of the Clean Development Mechanism (CDM) in this paper. The results of this paper can be used as a preliminary research for the effect of ICT on the reduction of GHG emission. The evaluation method which suggested in this paper will be suggested to CDM as the new standard for the reduction of GHG emission in the transportation field as well.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.1-8
• /
• 2011

Automatic vehicle license plate recognition technology is widely used in gate control and parking control of vehicles, and police enforcement of illegal vehicles. However inherent geometric information of the license plate can be transformed in the vehicle images due to the slant and the sunlight or lighting environment. In this paper, a distortion invariant vehicle license plate extraction and recognition algorithm is proposed. First, a binary image reserving clean character strokes can be achieved by using a DoG filter. A plate area can be extracted by using the location of consecutive digit numbers that reserves distortion invariant characteristic. License plate is recognized by using neural networks after geometric distortion correction and image enhancement. The simulation results of the proposed algorithm show that the accuracy is 98.4% and the average speed is 0.05 seconds in the recognition of 6,200 vehicle images that are obtained by using commercial LPR system.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.335-340
• /
• 2000

We investigated the role of the capping layers in the formation of the cobalt silicide in Co/Si systems with TiN and Ti capping layers and without capping layers. The Co/Si interfacial reactions and the phase transformations by the rapid thermal annealing (RTA) processes were observed by sheet resistance measurements, XRD, SIMS and TEM analyses for the clean silicon substrate as well as for the chemically oxidized silicon substrate by $H_2SO_4$. We observed the retardation of the cobalt disilicide formation in the Co/Si system with Ti capping layers. In the case of Co/$SiO_2$/Si system, cobalt silicide was formed by the Co/Si reaction due to with the dissociation of the oxide layer by the Ti capping layers.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03a
• /
• pp.289-309
• /
• 2004

위에서 언급한 바와 같이 계측대상 연약 지반이 대심도, 광역화함에 따라 연약지반 계측의 전반적인 추세는 자동계측 시스템의 사용과 준설ㆍ매립공사 또는 해수면상에서의 공사 특성상 케이블 관리의 어려움을 극복하고자 무선데이터 전송방식의 사용이다. 또한 유지관리의 필요성 증대로 인하여 계측 모니터링, 자동분석 프로그램의 기술도 발전되고 있다. 그러나 아직 국내는 계측에 대한 기술 개발이 미비할 뿐 아니라 계측기술에 대한 인식이 매우 부족하고, 관련법이 정비되지 못하여 계측관련 기술 및 경험이 전무한 영세업체들까지 난립하여 치열한 경쟁을 하는 관계로 기술개발에 대한 투자는 거의 중단된 상태이다. 따라서 정확한 유지관리 계측을 위해서는 대부분 외산기기에 의존할 수밖에 없는 상황이다. 그러나, 현재 국내의 전자통신 기술의 수준을 감안할 때 관련법이 정비되고 체계적인 연구와 투자가 이루어진다면 쉽게 세계적인 수준으로 도약할 수 있으리라 판단된다. 한국지반공학회의 연약지반위원회에서는 2003년 8월 20일 한양대학교 박물관 강당에서 학술세미나를 개최하였다. 본격적인 세미나에 앞서 '연약지반 공학자의 당면문제 및 해결방안'에 관한 주제로 전 연약지반위원회 위원장이셨던 (주)에스코 컨설턴트의 김승렬박사께서 초청강연을 하여 주셨다. 김승렬박사께서는 그 원고의 꼬리말을 다음과 같이 기술하며 마무리하셨다. 국내 연약지반 기술수준의 상황과 우리의 위상을 제고하기 위한 좋은 말씀으로 생각되어 본고에서는 그 부분을 인용하는 것으로 끝을 맺고자 한다. '우리나라의 연약지반 기술수준은 동남아시아 지역의 국가들인 싱가포르, 대만, 태국, 심지어는 베트남에 비해 결코 우월한 위치에 있지 않다. 오히려 많이 낙후되었다고 할 수 있다. 경제규모와 위상과 발전상태에 비추어 보면 실로 부끄러운 일이 아닐 수 없다. 이렇게 된 배경에는 연약지반이 사회의 문제로 대두되는 일이 미미하여 이 분야에 쓸리는 관심이 상대적으로 적은 점이 주원인이라고 볼 수 있다. 연약지반이 기술현장에서 문제로 떠오르기 시작한지도 째 오랜 시간이 경과하였다. 이제 더 이상 우리의 기술수준을 이대로 방치할 수는 없는 시점에 와 있는 것이다. 연약지반에 몸담고 있는 우리 스스로가 위상을 지키려는 노력을 배가하여야 한다. 연약지반 공학자들은 스스로 고급의 데이터를 생산하고 평가하고 예측하는 기법을 활발하게 적용하고 발전시킴으로써 자신들의 위치를 지켜야 할 것이다. Clean-handed-research만을 고집하는 환상에서 깨어나 국외의 변모하는 모습을 빠르게 수용하고 국내의 연약지반 관련 자료를 국외에 널리 알릴 수 있는 위치로 발돋움할 때 연약지반 공학자의 위상도 제고될 것이다.'

• Research in Community and Public Health Nursing
• /
• v.13 no.3
• /
• pp.574-583
• /
• 2002

'채석(quarrying)'산업은 노천광산에서 광물을 캐내는 작업을 모두 포함하는 광범위한 산업을 의미한다. 1900년대에 들어오면서 채석작업에 홈연소기(channel burner)을 이용한 불꽃절개법(flame cutting)이 이용하여 근로자의 먼지 노출이 많이 감소하였다. 채석작업으로 인한 주 된 건강문제는 먼지, 소음, 진동 노출이며, 노천작업장으로 작업환경이 개방되어 있어 환경측정 및 관리가 불가능하므로 개별근로자의 먼지와 소음 노출 측정 및 예방이 중요하다. 본 연구는 미국의 일개 채석회사의 근로자 건강관리사업을 평가하였다. 연구자료는 저자가 현장 방문을 통하여 구한 자료와 연구대상 회사의 안전관리자의 의견 및 미국 산업안전보건국 전산자료를 이용하였다. 채석사업장에서 이루어지는 작업은 크게 채석작업과 실내에서 이루어지는 가공작업 및 운반과 보관이며, 미국 산업안전보건국(OSHA)의 표준산업분류(SIC)에서 1411(채석업)과 3281(채석가공업)에 해당한다<표 1>. 연구 대상 사업장에서 이루어지는 산업보건프로그램은 먼지 노출 예방을 위해 석재 채취시 물분사법(water jet quarrying)과 국소환기법을 사용하고 소음 노출 예방을 위해 귀마개를 사용하며 사고 예방을 위하여 안전모와 철모, 보안경, 안전조끼, 보호장갑, 안전끈(harness)을 착용하였다. 평가 결과로 나온 연구 대상 사업장에서 적용하여야 할 산업보건 프로그램은 첫째, 먼지 노출로 인한 건강문제를 예방하기 위하여 근로자 개별 노출 측정을 하고, 둘째 실내가공작업장의 근로자를 대상으로 한 먼지와 소음 노출 측정 및 환경측정이 필요하며, 셋째 안전관리를 위해 채석장에 안전표지판을 설치하여야 하며, 실내가공 작업장의 자동이동시스템을 작업별로 채색하여 식별을 용이하게 하여야 하겠다. 또한 이 연구 결과를 영세사업장의 산업간호프로그램인 'Clean 3D'사업에서 적용하여 우리나라 채석사업장 근로자 건강관리를 발전시켜야 하겠다.

• Journal of the Korean Institute of Rural Architecture
• /
• v.19 no.4
• /
• pp.49-56
• /
• 2017

Each country in the world currently concentrates on shifting into clean energy, which can be alternative energy, for global environment protection and solution to the problem of fossil fuel depletion. The Korean government is predicted to develop renewable energy, such as solar power, ground power, and offshore wind power, and to increase their supply ratios by ending the use of coals and nuclear power plants. This study conducted experiments on thermal storage performance of Trombe wall thermal storage materials using solar power and simulations in order to offer baseline data for the development of a hybrid air circulation system for heating that can maximize efficiency by simultaneously using solar and geothermal power. The study results are as follows: (1) In all the specimens with 3m, 5m, and 7m in the length of thermal storage pipe, $5.7^{\circ}C$, $7.8^{\circ}C$, and $10.5^{\circ}C$ rose, respectively, as the thermal storage effect of the specimens attaching insulation film and black tape to the general funnel. They were most excellent in terms of thermal storage effect. (2) As a result of thermal performance evaluation on the II type specimens, II-3 ($7.8^{\circ}C$ rise) > II-4 ($5.3^{\circ}C$ rise) > II-1 ($3.9^{\circ}C$ rise) > II-2 ($2.3^{\circ}C$ rise) was revealed, and thus II-3 (insulation film + black tape) was most effective as shown in the I type. (3) This study analyzed air current and temperature distribution inside of the greenhouse by linking actually measured values and simulation interpretation results through the interpretation of CFD (computational fluid dynamics). As a result, the parts absorbing heat and discharging heat around the thermal storage pipe could be visibly classified, and temperature distribution inside of the greenhouse around the thermal storage pipe could be figured out.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.1
• /
• pp.116-121
• /
• 2009

Thermosonic flip chip bonding is an important technology for the electronic packaging due to its simplicity, cost effectiveness and clean and dry process. Mechanical properties of the horn and the shank, such as the natural frequency and the amplitude, have a great effect on the bonding capability of the transverse flip chip bonding system. In this research, two kinds of study are performed. The first is the new design of the clamp and the second is the effect of tolerance parameters to the performance of the system. The clamp with a bent shape is newly designed to hold the nodal point of the flip chip. The second is the effect of the design parameters on the vibration amplitude and planarity at the end of the shank. The variation of the tolerance parameters changes the amplitude and the frequency of the vibration of the shank. They, in turn, have an effect on the quantity of the plastic deformation of the gold ball bump, which determined the quality of the flip chip bonding. The tolerance parameters that give the great effect on the amplitude of the shank are determined using Taguchi's method. Error of set-up angle, the length and diameter of horn and error of the length of the shank are determined to be the parameters that have peat effect on the amplitude of the system.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3049-3052
• /
• 2008

MCFC(molten carbonate fuel cell) power generation system is prime candidate for the utilization of fossil based fuels to generate ultra clean power with a high efficiency. In the MCFC power plant system, a combustor performs a role to supply high temperature mixture gases for cathode and heat for reformer by using the stack off-gas of the anode which includes a high concentration of $H_2O$ and $CO_2$. Since a combustor needs to be operated in a very lean condition and to avoid excessive local heating, catalytic combustor is usually used. The catalytic combustion is accomplished by the catalytic chemical reaction between fuel and oxidizer at catalyst surface, different from conventional combustion. In this study, a mathematical model for the prediction of internal flow and catalytic combustion characteristics in the catalytic combustor adopted in the MCFC power plant system is suggested by using the numerical methods. The numerical simulation models are then implemented into the commercial CFD code. After verifying result by comparing with the experimental data and calibrated kinetic parameters of catalytic combustion reaction, a numerical simulation is performed to investigate the variation of flow and combustion characteristics by changing such various parameters as inlet configuration and inlet temperature. The result show that the catalytic combustion can be effectively improved for most of the case by using the perforated plate and subsequent stable catalytic combustion is expected.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.131-136
• /
• 2010

The purpose of this study is to provide foundational data for expansion of solar generation in building application, a clean energy, by introducing applicability of solar power generation system on roofs of industrial buildings and computing expected amounts of power and carbon dioxides reduction. As methodologies of this study, after reviewing 120,000 domestic factories to verify the BIPV feasibility for industrial building sthrough theoretical considerations of solar generation system, we calculated BIPV application methods and subsequent expected power generation quantity and carbon dioxide reductions through roof type analysis. we analyzed four cases of expected power generation amounts of solar batteries according to application methods, and when considering that the main type of roofs are slant roofs according to the investigation result about roof forms of domestic industrial complexes, we believe that the module angle of a slant roof around $17^{\circ}$(case3) is most suitable for the application. Finally, we came up with 517,944[TOE] as the corresponding petroleum tonnage based on this computed expected power generation amount and the amount of 1,214,836[$tCO_2$] carbon dioxide reductions by calculating them by energy sources.

• Korean Journal of Optics and Photonics
• /
• v.26 no.1
• /
• pp.9-16
• /
• 2015

We have developed ellipsometry lidar and measured aerosol and ice-cloud characteristics. To measure a full normalized backscattering phase matrix (NBSPM) composed of nine elements, we have designed an optical system with three kinds of transmission and three kinds of reception, composed of ${\lambda}/2$ waveplate, ${\lambda}/4$ waveplate and empty optic. To find systematic optical errors, we used clean day middle-altitude (4-6km) lidar signals for which the aerosol's concentration was small and its orientation chaotic. After calibrating our lidar system, we have calculated NBSPM elements scattered from an aerosol and from an ice cloud. In the case of an aerosol, we found that the off-diagonal values $m_{12},{\ldots},m_{34}$ of the NBSPM are smaller than those for a cirrus cloud. Also, the off-diagonal values of the NBSPM from a cirrus cloud depend on atmospheric conditions.