• Journal of the Korean Geosynthetics Society
• /
• v.12 no.1
• /
• pp.21-28
• /
• 2013

This study proposed optimum lime contents for clayey soils consisting of representative clay minerals, Kaolinite and Na-Bentonite, according to optimum lime content method (ASTM C 977-22) by means of ground improvement method of clayey soils. As geotechnical properties, the variations of atterberg limits and unconfined compressive strength were analyzed and Ca-ion and micro-structure along elapsed time were observed for lime-added clayey specimens. The test results show that optimum lime content method provides an appropriate methodology for ground improvement of clayey soils and the variation of $Ca^{2+}$ might be a good index to predict the rate of ground improvement for clayey soils with lime addition.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.169-178
• /
• 2002

The stress~strain characteristics of geosynthetics reinforced clayey soil were investigated by triaxial compression tests. All the tests were peformed either on unreinforced or reinforced soils under fully drained condition after having been consolidated isotropically or anisotropically to the required level of effective stresses by the small increment of 0.05kgf/$cm^2$. The anisotropically consolidated drained tests were performed to simulate the in-situ condition of reinforced soil structures such as reinforced soil wall, abutment and embankment which are generally in the anisotrpic state. From a series of tests it was ffund that the behavior of the anisotropically consolidated reinforced clayey soils was very different from stress~strain characteristics of consolidated reinferced clayey soils. It was found especially that the initial Young's moduli of anisotropically consolidated reinforced clayey soils were higher than those of isotropically consolidated reinforced clayey soils. It was found also that the reinforcement effect in anisotropically consolidated reinforced soils developed at a much lower level of axial strain(0.01%) compared with isotropically consolidated ones(about 1.0~5.0%).

• Geomechanics and Engineering
• /
• v.16 no.3
• /
• pp.217-231
• /
• 2018

Clayey soils with swelling and shrinkage characteristics have been major causes for many problems in roads, buildings and other civil engineering infrastructure in various areas of Pakistan, particularly where there are several patches of such soils on either side of Indus River. As the consistency characteristics are directly related with the variation of moisture content; therefore, this study was explicitly focused to investigate the effect of lime and wheat straw on the consistency characteristics of clayey soils with relatively high swelling and shrinkage characteristics. The consistency test results indicate that by the increase in lime content there is a decrease in the plasticity index of soil; for instance, 10% lime content resulted to 59% decrease in the plasticity index value. On the other hand; the addition of wheat straw resulted in a significant increase in the plasticity index; for instance, 10% wheat straw content resulted to a 120% increase in the plasticity index. This study has further shown that the shrinkage and swelling of clayey soils which resulting to several problems in the civil engineering infrastructures may adequately be managed through mixing an appropriate amount of lime and wheat straw as soil stabilizing agent for both immediate and long-term effects.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.3
• /
• pp.97-106
• /
• 2000

The study is closely relevant to Lade's single work hardening model. This model has been shown to have good applicability to cohesive soils. However the validation of this model on the clayey soils has not been satisfactorily reported. To scrutinize the applicability of this model on clayey foundation the laboratory tests for Kwangyang clayey soils were performed using the improved cubical triaxial test apparatus designed originally by Lade. A computer program was developed by which soil parameters for the single work-hardening model can be rationally determined by deleting some dispersed test data generated usually at the initial stage of laboratory tests. And using the program numerical analysis of the cubical clayey specimens using intermediate principal stress was carried out and a good agreement between observed values and numerical results was found.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.2
• /
• pp.73-85
• /
• 1995

This study aimes at investigating the applicability of single surface work - hardening model(7, 8) to clayey soils through FEM analysis. The comparison was carried out for the results between numericaL analysis and cubical triaxial tests in which confined stress was applied differently and 3-directional principal stress can be controlled. Furthermore, the results of the numerical analysis were compared with observed values of load test on the 2-dimensional model foundation composed of clayey soils. The agreement between nu- merical and observed values proved to be of high accuracy, which indicates that numeri- cal techniques developed during this study using the model can be used for the prediction of settlement, leteral displacement and pore water pressure of actual soft foundation of clayey soils.

• Geomechanics and Engineering
• /
• v.10 no.1
• /
• pp.95-107
• /
• 2016

Deep soil mixing with cement and cement-lime mixtures has been widely used for decades to improve the strength of soils. In this study, small-scale laboratory model tests of polymer columns in soft clayey soil were conducted to evaluate the feasibility of using various polymeric compounds as binders in deep soil mixing. Floating and end bearing polymer columns were used to examine the load-settlement relationship of improved soft clayey soils for various area replacement ratios. The results indicate that polymer columns show good promise for use in deep mixing applications.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.922-929
• /
• 2009

In this paper, 4 representative soft clayey soils in south Korea are selected to estimate the geotechnical characteristics and provide the instructions avaliable for construction works; Inchon Coast, Kum River Estuary, Kwangyang Bay, and Nakdong River Estuary. Total 2250 boring data are collected to construct the data base system on selected areas from Korea geotech DB system, scientific journals, theses, and site investigation reports. Considering the geological, topographical and regional features, geotechnical properties, deformation and strength characteristics of 4 soft clayey soils are evaluated by analyzing the constructed DB system statistically.

• Geotechnical Engineering
• /
• v.13 no.2
• /
• pp.125-136
• /
• 1997

The fullsized drawbar pull test is carried out in Yeog-gol area to find out the effect of test vehicle's trafficability with the variation of density and water content at the weathered granite soils and water content at the clayey soils. According to the results, it is found that the behavior of optimum drawbar pull is effected not only by water content but also by density. This paper showed the method of determination of optimum points at a curve of drawbar pull varying with the conditons of soils. And it also showed the optimum drawbar pull coefficient and optimum slip varying with the density of the weathered granite soils.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.467-472
• /
• 1998

The interface friction angle between soil and fibers is important to evaluate improvement of the shear strength on fiber mixed soils. Direct shear test and pullout tort conducted by an apparatus made specially for the purpose of this study, was analyzed to know how fiber and soils affect on interface friction angle. By the results, The value of interface friction angle of sandy soils is larger than that of clayey soils. As a diameter of fiber is large, the value of friction coefficient of sandy soil is increase and that of clayey soil is decrease. An interface friction angle of well graded soil is larger value than that of uniform graded soil

• Journal of Environmental Impact Assessment
• /
• v.17 no.6
• /
• pp.321-333
• /
• 2008

Considering risks and artificial enrichments of metals in the soils of the study area, the study aims to analyze geology, grain size and geochemistry. Geology is mainly composed of gneisses and phyllites of metamorphic rocks, sandstones, siltstones, shales, tuffs of sedimentary ones and granites and andesites of igneous ones in the area. In the area, mean contents of metals are not meaningful in accordance with petrogenesis. The soil textures of the area are of S, lS and sL of sandy soil, L, scL, cL of loam and C, zC and sC of clayey soil. Mean contents of Ni, Cr, Co and Cu are meaningfully high in loam and clayey soil relative to sandy soil, whereas Ni, Zn, Cd contents are higher in clayey soil than in loam. Those differences imply the metallic contents are dependent to grain size. Based on the metal contents in the soils of the study area, Cu and Zn in loams and Pb in sandy soils are corresponded to soil contamination warning standards, and As showing 75mg/kg of maximum content in loams is assigned to soil contamination countermeasure standards, respectively. Artificial enrichment factor minimized wall rock and grain size relations is over 1 in Cr, Ni and Cu, but the factor is below 1 in average of other metals.