• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.585-589
• /
• 2000

본 논문에서 제안하는 양식 경영 자동화의 표준안은 개인의 경험과 주관적인 판단에 의한 비합리적인 양식장 운영을 개선하여 양식장의 경영 표준안을 제시하는데 그 의의가 있으며 이 표준안은 실제 양식장들이 전통적으로 일지를 기록하고 있다는 것에 기초하여 제작되었다. 제안하는 표준안은 양식장 관리일지 기입만으로 모든 통계자료와 경영상태 판매시점 예측이 가능하며 정보화가 더딘 어업인을 대상으로 고급메뉴와 초급 메뉴를 차별화 하여 사용상의 어려움을 최소화시키고 조작의 간결성을 더하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.96-100
• /
• 1997

The shadow moire is one of the optical techniques which is able to give contour lines of an object with respect to a master grating plane. The moire patterns are issued from the superposition of a master grating and its shadow projected on the surface of an object. In case of the classical shadow moire method, the sensitivity was a few tenths millimeters. generally, it is difficult to use a phase shift method in shadow moire because it is impossible to obtain uniform phase shifts on the whole field. But in this study we use the fact that if the depth of object is much less than the distance between the observer and the master grating, and the object is displaced perpendicularly to the grating plane, phase shifts are almost uniform. Finally we obtained a better resolution by using a phase shift procedure and applied the phase shifting shadow moire to three dimensional shape measurement.

• 한국환경과학회지
• /
• 제13권4호
• /
• pp.429-434
• /
• 2004

The purpose of this study was to investigate the possibility of application of microwave energy for the fabrication of polymer/clay nanocomposite. APES/Clay nanocomposites were prepared at 13$0^{\circ}C$ for 30min with various content of clay by melt-intercalation method under classical and microwave heating source. APES/Clay samples were characterized by the means of X-ray diffractometry(XRD), thermal gravimetric analysis(TGA), and rheometric dynamic analysis(RDA). It was found that intercalated or exfoliated state was obtained in the samples according to the condition of organic modification, clay content, and heating source.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권4호
• /
• pp.250-256
• /
• 2001

This paper deals with a design problem of a decentralized controller with a strongly connected two-input two-output multivariable system. To this end, we present a classical design approach which consists of two main steps: one is to decompose the multivariable plant into two single-input single-output systems by means of the Individual Channel Design (ICD) concept, the other is to design controller of each channel by the Coefficient Diagram Method (CDM) so that it satisfies, especially, time domain specifications such as settling time, overshoot etc.. A design procedure was proposed and then was applied to a 2$\times$2 hot rolling mill plant. Simulation results showed that the proposed method has excellent control performances.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.283-291
• /
• 2002

The paper demonstrates the tracking performance of a sliding horizon feedback/feedforward preview optimal control when applied to a hydraulic motion simulator which has been built to provide a means of replicating the actual ride dynamics of an automobile seat/human system. The design was developed by solving an ordinary differential equation problem instead of a Ricatti equation. Simulation results indicate that the proposed technique has good performance improvement in phase tracking when compared to the classical design methods. It is also found that the controller can be adjusted more easily for robustness due to more tuning parameters.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.206-211
• /
• 2004

This paper deals with the flexural strengthening of reinforced concrete beams by means of thin fiber reinforced plastic(FRP) laminas. This study focuses on modeling of structural of concrete bonded FRP laminate in flexural bending members. Used computational equation is derived by relation of stress and strain. The section analysis is based on experimental observations of a linear strain distribution in the cross section until failure, and a multi-linear moment-deflection curve that is divided into four regions, each terminated by a similarly numbered point. The load-deflection relationship in each region is assumed to be linear. The present model is validated to compare wit the experiment of 4-point bending tests of R/C rectangular beams strengthened with CFRP laminates, and has well predicted the moment-displacement relationships of members.

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.227-232
• /
• 1994

In the performance domain, physical performance is a measure that represents some degree of system, subsystem, component or device success in a continuous sense, as opposed to a classical binomial sense (success or failure). If applicable sensing and monitoring means exist, physical performance can be observed over time, along with explanatory variables or covariables. Performance-based reliability represents the probability that performance will remain satisfactory over a finite period of time or usage cycles in the future when a performance critical limit (which represents an appropriate definition of failure in terms of performance) is set at a fixed level, based on application requirements. In the case of inadequate knowledge of the failure mechanics, this physical based empirical modeling concept along with performance degradation knowledge can serve as an important analysis tool in reliability work in product and process improvement.

• 공학교육연구
• /
• 제18권6호
• /
• pp.57-63
• /
• 2015

The purpose of this paper is to find a method to combine engineering education and the humanities by means of the movie genre. Although the science technology has developed and our living standard has improved, humanities has a tendency to be underestimated. Humanities has been treated as something antiquated, uninteresting or worn-out because it has no economic value or usefulness in itself. Engineering students need flexible, analytic and critical thought as well as the qualities in constructing key questions and trying to solve themselves. Communicative and understanding abilities are also required to them. Movies as a constructive visual device show problems with the reality. Especially, the science-related movie genre offers them an opportunity to think over why humanities matters as well as what matters in human being. The movies make engineering students think, discuss and argue on the humanity.

• Communications for Statistical Applications and Methods
• /
• 제24권4호
• /
• pp.397-419
• /
• 2017

A four-parameter extended fatigue lifetime model called the odd Birnbaum-Saunders geometric distribution is proposed. This model extends the odd Birnbaum-Saunders and Birnbaum-Saunders distributions. We derive some properties of the new distribution that include expressions for the ordinary moments and generating and quantile functions. The method of maximum likelihood and a Bayesian approach are adopted to estimate the model parameters; in addition, various simulations are performed for different parameter settings and sample sizes. We propose two new models with a cure rate called the odd Birnbaum-Saunders mixture and odd Birnbaum-Saunders geometric models by assuming that the number of competing causes for the event of interest has a geometric distribution. The applicability of the new models are illustrated by means of ethylene data and melanoma data with cure fraction.

• Journal of the Korean Data and Information Science Society
• /
• 제12권1호
• /
• pp.51-59
• /
• 2001

독립이면서 로그정규분포를 따르는 두 모집단의 평균 차이에 대한 검정으로 O'Hagan (1995)이 제안한 부분 베이즈요인을 이용한 베이지안 방법을 제안한다. 이 때 모수에 대한 사전분포로는 무정보적 사전분포를 사용한다. 제안한 검정 방법의 유용성을 알아보기 위하여 실제 자료의 분석과 모의실험을 이용하여 고전적인 검정방법과 그 결과를 비교한다.