• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.180-188
• /
• 1996

The stress singularity of a sharp wedge contacting a half plane can be avoided by changing the wedge shape. Shape optimization is accomplished with the geometric strain method (GSM), an optimality criterion method. Several numerical examples are provided for different materials in the wedge and half plane to avoid stress singularity neal the sharp corner of the wedge. Optimum wedge shapes are obtained and critical corner angles are compared with the angles from analytical contact mechanics. Numerical results are well matched to analytical and experimental results. It is shown that shape optimization by the geometric strain method is a useful tool to reshape the wedge and to avoid a stress singulatiry. The method applies to more general geometries where the singular behavior would be difficult to avoid by classical means.

• Journal of the Korean Statistical Society
• /
• v.28 no.1
• /
• pp.73-92
• /
• 1999

In Bayesian model selection or testing problems, one cannot utilize standard or default noninformative priors, since these priors are typically improper and are defined only up to arbitrary constants. The resulting Bayes factors are not well defined. A recently proposed model selection criterion, the intrinsic Bayes factor overcomes such problems by using a part of the sample as a training sample to get a proper posterior and then use the posterior as the prior for the remaining observations to compute the Bayes factor. Surprisingly, such Bayes factor can also be computed directly from the full sample by some proper priors, namely intrinsic priors. The present paper explains how to derive intrinsic priors for simple tree ordered exponential means. Some numerical results are also provided to support theoretical results and compare with classical methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.577-583
• /
• 1994

The purpose of this paper is to study the force control law which can be implemented on a non-modified robot system. The external force control algorithm proposed in this paper can be designed by means of a classical and modern control law. We showed the validation and the possibility of muti-dimensional force control idea through the simulation and experiments. Also, the Iterative learning control is studied for compensating errors due to thr disturbances and nonlinear effects. The previous information(control input, error) was used to determine the control input of next trial. The experimental result show the vaidity of this algorithm.

• Communications for Statistical Applications and Methods
• /
• v.25 no.5
• /
• pp.523-544
• /
• 2018

Bivariate distributions play a fundamental role in survival and reliability studies. We consider a regression model for bivariate survival times under right-censored based on the bivariate Kumaraswamy Weibull (Cordeiro et al., Journal of the Franklin Institute, 347, 1399-1429, 2010) distribution to model the dependence of bivariate survival data. We describe some structural properties of the marginal distributions. The method of maximum likelihood and a Bayesian procedure are adopted to estimate the model parameters. We use diagnostic measures based on the local influence and Bayesian case influence diagnostics to detect influential observations in the new model. We also show that the estimates in the bivariate Kumaraswamy Weibull regression model are robust to deal with the presence of outliers in the data. In addition, we use some measures of goodness-of-fit to evaluate the bivariate Kumaraswamy Weibull regression model. The methodology is illustrated by means of a real lifetime data set for kidney patients.

• Journal for History of Mathematics
• /
• v.28 no.4
• /
• pp.181-190
• /
• 2015

In spite of various attempts to characterize the ontological status of space-time, Newtonian substantivalism and Leibnizian relationism, what is really at issue in the controversy between the two parties is by no means clear. This essay argues that from the perspective of space-time symmetries, classical space-time can be unambiguously classified as substantival space-time and relational space-time. The symmetries of space-time theories distinguish the invariant geometric relationships between events. The essential difference between the two space-times stems from whether or not there exists the affine structure that distinguishes the inertial trajectories of a given body.

• Journal of the Korean Data and Information Science Society
• /
• v.11 no.2
• /
• pp.269-277
• /
• 2000

We propose the Bayesian testing for the equality of two log-normal population means. Specifically we use the intrinsic Bayes factors suggested by Berger and Perichi (1996, 1998) based on the noninformative priors for the parameters. In order to investigate the usefulness of the proposed Bayesian testing procedures, we compare it with classical tests via both real data analysis and simulation.

• Journal of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.113-115
• /
• 1965

In previous paper, the determination procedure of fission products mainly consists of many steps which are usually derived from classical analysis schemes. In the present paper a simple and more rapid method of the determination of fission products by means of a smaller amount of reagent than that correspond to the stoichiometric ratio of element to be determined is investigated. The yield of Ba-140 in fission products is determined by this method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.305-309
• /
• 2002

In this paper, we present a standard S/W solution for nursery administration. This S/W would substitute for classical nonscientific nursery management that has depended on personal experience and intuition. Especially, the suggest S/W based on its early model(Hwangkum-a-jang) is designed to operate on its daily diary writing. It means every statistical data and information for a sales can be calculated by self analyzing function just by keeping a diary.

• Advances in aircraft and spacecraft science
• /
• v.2 no.3
• /
• pp.249-261
• /
• 2015

The mechanical characterization of composite materials is nowadays a major interest due to their increasing use in the aeronautic industry. The design of most of these materials is based on their stiffness, which is mainly obtained by means of tensile tests with strain gauge measurement. For thin laminated composites, this classical method requires adequate samples with specific orientation and does not provide all the independent elastic constants. Regarding ultrasonic characterization, especially immersion technique, only one specimen is needed and the entire determination of the stiffness tensor is possible. This paper presents a study of different methods to determine the mechanical properties of transversely isotropic carbon fibre composite materials (gauge and correlation strain measurement during tensile tests, ultrasonic immersion technique). Results are compared to ISO standards and manufacturer data to evaluate the accuracy of these techniques.

• Structural Engineering and Mechanics
• /
• v.36 no.6
• /
• pp.669-678
• /
• 2010

In general means, the stress concentration problem of elastic plate with a rectangular hole can be investigated by numerical methods, and only approximative results are derived. This paper deduces an analytical study of the stress concentration due to a rectangular hole in an elastic plate under bending loads. Base on classical elasticity theory and FEM applying the U-transformation technique, the uncoupled governing equations with 3-DOF are established, and the analytical displacement solutions of the finite element equations are derived in series form or double integral form. Therefore, the stress concentration factor can then be discussed easily and conveniently. For the plate subjected to unidirectional bending loads, the non-conforming plate bending element with four nodes and 12-DOF is taken as examples to demonstrate the application of the proposed method. The inner force distribution is obtained. The solutions are adequate for the condition when the hole is far away from the edges and the thin plate subjected to any transverse loadings.