Browse > Article
http://dx.doi.org/10.12989/aas.2015.2.3.249

Determination of the elastic properties in CFRP composites: comparison of different approaches based on tensile tests and ultrasonic characterization  

Munoz, Victor (Universite de Toulouse, INP-ENIT)
Perrin, Marianne (Universite de Toulouse, IUT, ICA)
Pastor, Marie-Laetitia (Universite de Toulouse, IUT, ICA)
Welemane, Helene (Universite de Toulouse, INP-ENIT)
Cantarel, Arthur (Universite de Toulouse, IUT, ICA)
Karama, Moussa (Universite de Toulouse, INP-ENIT)
Publication Information
Advances in aircraft and spacecraft science / v.2, no.3, 2015 , pp. 249-261 More about this Journal
Abstract
The mechanical characterization of composite materials is nowadays a major interest due to their increasing use in the aeronautic industry. The design of most of these materials is based on their stiffness, which is mainly obtained by means of tensile tests with strain gauge measurement. For thin laminated composites, this classical method requires adequate samples with specific orientation and does not provide all the independent elastic constants. Regarding ultrasonic characterization, especially immersion technique, only one specimen is needed and the entire determination of the stiffness tensor is possible. This paper presents a study of different methods to determine the mechanical properties of transversely isotropic carbon fibre composite materials (gauge and correlation strain measurement during tensile tests, ultrasonic immersion technique). Results are compared to ISO standards and manufacturer data to evaluate the accuracy of these techniques.
Keywords
carbon fibre composite; elastic constants; immersion ultrasonic characterization; tensile test; stiffness tensor;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Aristegui, C. and Baste, S. (1997), "Optimal recovery of the elasticity tensor of general anisotropic materials from ultrasonic velocity data", J. Acoust. Soc. Am., 101(2), 813-833.   DOI
2 Balasubramaniam, K. and Whitney S.C. (1996) "Ultrasonic through-trsmission characterization of thick fiber-reinforced composites", NDTE. Int., 29(4), 225-236.   DOI
3 Baste, S. and Hosten, S. (1990), "Evaluation de la matrice d'elasticite des composites orthotropes par propagation ultrasonore en dehors des plans principaux de symetrie", Phys. Appl., 25, 161-168.
4 Baudouin, S. and Hosten, B. (1996), "Immersion ultrasonic method to measure elastic constants and anisotropic attenuation in polymer-matrix and fiber-reinforced composite materials", Utrasonics, 34, 379-382.   DOI
5 Castagnede, B., Jenkins, J.T., Sachse, W. and Baste, S. (1990), "Optimal determination of the elastic constants of composites materials from ultrasonic wavespeed measurements", J. Appl. Phys., 67(4), 2753-2761.   DOI
6 Chu, Y.C., Degtyar, A.D. and Rokhlin, S.I. (1994), "On determination of orthotropic material moduli from ultrasonic velocity data in nonsymmetry planes", J. Acoust. Soc. Am., 95(6), 3191-3203.   DOI
7 El Bouazzaoui, R., Baste, S. and Camus, G. (1996), "Development of damage in a 2D woven C/SiC composite under mechanical loading: II. Ultrasonic characterization", Compos. Sci. Technol., 56, 1373-1382.   DOI
8 Franco, E.E., Meza, J.M. and Buiochi, F. (2011), "Measurement of elastic properties of materials by the ultrasonic through-transmission technique", Dyna, 78(168), 59-64.
9 Kawashima, K., Shimizu, Y. and Imuta, M. (1998) "Measurements of anisotropic elastic constants for an aluminium composite plate using a doble reflection method", Rev. Prog. Quant. Nondestr. Eval., 17, 1125-1130.
10 Margueres, P. (2000), "Developpement de techniques d'investigation et de suivi du comportement des materiaux composites soumis a un endommagement evolutif", Ph.D. Thesis, Universite de Technologie de Compiegne, Compiegne.
11 Munoz, V., Perrin, M., Pastor, M.L., Welemane, H., Cantarel, A. and Karama, M. (2014), "Identification of the elastic properties in CFRP composites", Proceedings of the 5th International Symposium on Aircraft Materials, Marrakech, Morocco, April.
12 Rose, J.L. (1999), Ultrasonic Waves in Solid Media, Cambridge University Press, UK.
13 Rao, B.P.C., Jayakumar, T., Bhattacharya, D.B. and Raj, B. (1993), "New methodology for precise ultrasonic velocity measurement and its applications", J. Pure Appl. Ultrason., 15, 53-59.
14 Reddy, S.S.S., Balasubramaniam, K., Krishnamurthy, C.V. and Shankar M. (2005), "Ultrasonic goniometry immersion techniques for the measurement of elastic moduli", Compos. Struct., 67, 3-17.   DOI
15 Rokhlin, S.I. and Wang, W. (1992), "Double through-transmission bulk wave method for ultrasonic phase velocity measurement and determination of elastic constants of composite materials", J. Acoust. Soc. Am., 91(6), 3303-3312.   DOI
16 Soutis, C. (2005), "Fibre reinforced composites in aircraft construction", Prog. Aerosp. Sci., 41, 143-151.   DOI
17 Standard NF EN ISO 527-5 (2009), "Plastics-Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites", AFNOR.
18 Sutton, M., McNeill, S.S., Helm, J. and Caho, Y. (2000), "Advances in two-dimensional and three-dimensional computer vision", Photomech. Topics. Apll. Phys., 77, 323-372.   DOI
19 Vishnuvardham, J., Krishnamurthy, C.V. and Balasubramaniam, K. (2007), "Genetic algorithm reconstruction of orthotropic composite plate elastic constants from a single non-symmetric plane ultrasonic velocity data", Compos. Part B Eng., 38, 216-227.   DOI
20 Zimmer, J.E. and Cost, J.R. (1970), "Determination of elastic constants of a unidirectional fiber composite using ultrasonic velocity measurements", J. Acoust. Soc. Am., 47, 795-803.   DOI