• Journal of Korean Public Health Nursing
• /
• v.13 no.2
• /
• pp.26-44
• /
• 1999

The study was done to improve the job training course for Community Health Practioners (CHPs) by evaluating the level of help that the training provided to the CHPs in carrying out their work and to analyze the management activities of the CHPs in order to develop a more effective CHP training program. The methodologies used in the study were a questionnaire survey. The survey results were analyzed using SPSS Windows. The study results are as follows. 1. The total average level of help from the job training(Theory. Practice and Field Practice) for carrying out the CHP work was found to be $3.04\pm.53$ (of a possible 4), which indicates a high level of help. The average for clinical practices was $3.16\pm.60$. for theory. $3.11\pm.40$ and for field practice. $2.84\pm.60$. 2. For the theory content of the job training courses. the help level was low in the area of mother and child health management/family planning with an average of $2.65\pm.62$ and in the area of health information system development with an average of $2.62\pm.83$. The reason for these deficiencies were. in order of frequency. few opportunities to apply learning. training content that was inadequate. training methodologies which were incongruent with content. improper training items and insufficient class hours. For the practice. the clinical work in rehabilitation/orthopedics departments and in ENT/Opthalmology departments had averages of $2.96\pm.86$ and $2.97\pm.80$ respectively. This low level resulted from the lack of direct experience. lack of sincerity during the practice time. lack of practice guidance. insufficient time and lack of practice equipment. in that order. For the field practice. the delivery management averaged $2.06\pm.90$ as the lowest help level. In this case 68% of respondents replied that there were no relevant reasons for this deficiency. 21% responsed that there was a lack of direct experience, 7%, a lack of practice guidance and 4.8%, insufficient time. 3. There were significant differences for several demographic variables when comparing the help level of the clinical courses (practice and Field Practice). A higher help level was reported by older nurses as compared to younger ones, experienced nurses as compared to scholarship nurses, and married over single. Also for nurses who had finished more other programs and were qualified or licensed in several areas the level was high. Although it was not statistically significant the level was higher if the work area was in a rural county, not a city, and if one had more recently completed the job training(P<,05). 4. Of the respondents 58.6% replies stated the period of job training for the CHP was adequate, but 51.7% reported that the period for theory courses was too short while an other 48.3% responded that it was sufficient. For practice locations, 50% responsed that it was good to practice in medical institutions(primary, secondary and tertiary) at the same time. While 48.3% agreed that doing theory and practice simultaneously was good, and 56.9% agreed that field practice should be done after completing theory and practice training. Hence, the development of new field practice guidelines suitable for changing environments of health management are required in place of the existing ones which were considered low in help level to the practical work of the CHPs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1470-1474
• /
• 2004

This paper addresses the development of inverse compensation techniques for a class of ferromagnetic transducers including magnetostrictive actuators. In this work, hysteresis is modeled through the domain wall theory originally proposed by Jiles and Atherton[1]. This model is based on the quantification of the energy required to translate domain walls pinned at inclusions in the material with the magnetization at a given field level specified through the solution of an ordinary differential equation. A complementary differential equation is then employed to compute the inverse which can be used to compensate for hysteresis and nonlinear dynamics in control design.

• 한국데이터정보과학회:학술대회논문집
• /
• 2006.11a
• /
• pp.9-20
• /
• 2006

Even though there are lots of learning theory and learning Instruments today, it is still difficult to teach the children individually taking their learning ability into consideration. In this case lower level children may be discouraged and cannot catch up the next course. The purpose of this paper is to design and develop webb-based courseware on arithmetics for the disabled children and apply the program to the class field. This program is very useful for the left-behind children because it enables the repetitive and visible learning.

• Kyungpook Mathematical Journal
• /
• v.49 no.2
• /
• pp.355-387
• /
• 2009

Functoriality conjecture is one of the central and influential subjects of the present day mathematics. Functoriality is the profound lifting problem formulated by Robert Langlands in the late 1960s in order to establish nonabelian class field theory. In this expository article, I describe the Langlands-Shahidi method, the local and global Langlands conjectures and the converse theorems which are powerful tools for the establishment of functoriality of some important cases, and survey the interesting results related to functoriality conjecture.

• Educational Technology International
• /
• v.23 no.2
• /
• pp.157-181
• /
• 2022

Scale scores for cognitive domains have been used as an important indicator for both academic achievement and clinical diagnosis. For example, in education, Cognitive Abilities Test (CogAT) has been used to measure student's capability in academic learning. In a clinical setting, Cognitive Impairment Screening Test utilizes items measuring cognitive ability as a dementia screening test. We demonstrated a procedure of generating cognitive ability test items similar as in CogAT but the theory associated with the generation is totally different. When creating cognitive test items, we applied automatic item generation (AIG) that reduces errors in predictions of cognitive ability but attains higher reliability. We selected two cognitive ability test items, categorized as a time estimation item for measuring quantitative reasoning and a paper-folding item for measuring visualization. As CogAT has widely used as a cognitive measurement test, developing an AIG-based cognitive test items will greatly contribute to education field. Since CLASS is the only LMS including AIG technology, we used it for the AIG software to construct item models. The purpose of this study is to demonstrate the item generation process using AIG implemented within CLASS, along with proving quantitative and qualitative strengths of AIG. In result, we confirmed that more than 10,000 items could be made by a single item model in the quantitative aspect and the validity of items could be assured by the procedure based on ECD and AE in the qualitative aspect. This reliable item generation process based on item models would be the key of developing accurate cognitive measurement tests.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.1
• /
• pp.35-43
• /
• 2008

The control of underactuated mechanical system is very complex for the loss of its control inputs. The model of underactuated mechanical systems in a potential field is built with Lagrangian method and its structural properties are analyzed in detail. A genetic algorithm (GA)based stable control approach is proposed for the class of under actuated mechanical systems. The Lyapunov stability theory and system properties are utilized to guarantee the system stability to its equilibrium. The real-valued GA is used to adjust the controller parameters to improve the system performance. This approach is applied to the underactuated double-pendulum-type overhead crane and the simulation results illustrate the complex system dynamics and the validity of the proposed control algorithm.

• Communications of Mathematical Education
• /
• v.36 no.1
• /
• pp.107-138
• /
• 2022

This study is a study that developed class materials that can apply Process-Focused Assessment to classes by paying attention to feedback using teacher learning community programs centered on teachers belonging to the same school in the field. In particular, this study was conducted with the aim of developing class materials applicable to actual classes. At this time, We thought about how to provide appropriate feedback when applying course-based evaluation in school field classes. It was conducted according to the procedure of data development research by Lee & Ahn(2021). As for the procedure of data development itself, an evaluation plan was established by establishing a strategy to reconstruct achievement standards and confirm understanding based on curriculum analysis. Next, an evaluation task, a scoring standard table, and a preliminary feedback preparation table were developed. In addition, based on these development materials, a learning guidance plan that can predict scenes when applying actual classes was developed as a result. This study has value as a practical study that can contribute to providing a link between theory and field schools. It is also meaningful in that it considered how the teacher would grasp when to provide feedback in performing rocess-Focused Assessment. Likewise, in providing feedback by teachers, it is meaningful in that it reflects in the data development how to prepare in advance and take classes according to the characteristics of the subject. Finally, it seems that the possibility of field application can be improved in that the results of the 4th class developed in this study are presented in a form applicable to the class directly in the field.

• Korean Institute of Interior Design Journal
• /
• no.28
• /
• pp.158-166
• /
• 2001

e-revolution makes a lot of changes in the methodology all over the world. That is, the theory of real time showing helps people to access audio and visual wherever and whenever they are. In the pst computers were considered as only tools which could make us work easily. However, the meaning of computer is changing with e-revolution nowadays. Computers are not just computers as they were; they have done a lot of things which we thought impossible and they will do in the future as well. This new wave encourages people who are teaching the design to use computers whatever they do. For example, instead of using pencil and a drafting board, most people in the design field work with monitors, mouse and plotter. Therefore, most people who are in the design field need to have the ability of computer skills. They have to use computers not only in their class but also in their office. However, if we use computers for visual presenting in the class, it will not be enough to catch the e-revolution. That is, we should work with computers in the creative and conceptual design such as the using of the design information and the applying digital techniques in the early stage of the work. The purpose of this study is to show how to work with computers in the spacial design process especially th using of the DIS(Design Information System) and the applying digital techniques in the early stage of the work.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.1
• /
• pp.151-165
• /
• 2022

The aim of this study is to examine the effectiveness of non-face-to-face classes conducted due to the COVID-19 crisis. In order to achieve this goal, a non-face-to-face class with flipped learning was applied in one subject of clothing major held at 'S' University in Cheongju, Korea. In addition, this study tried to analyze the differences between pre- and post-non-face-to-face classes in problem analysis ability, resource/information/technology literacy, convergent thinking ability as core competencies, and overall learning satisfaction. As a result, after participating in the non-face-to-face class in which the flipped learning was applied, the students recognized that their abilities improved in the three problem-solving competency sub-areas, and their overall learning satisfaction also increased. The effectiveness of non-face-to-face classes in the field of clothing and fashion has been mainly measured in fashion design and clothing construction courses. However, based on the results of this study, it can be suggested that non-face-to-face classes in a theory-oriented lecture-type class can be effective methods for improving students' core competencies such as problem-solving skills if teaching-learning methods such as flipped learning are applied. Therefore, the results of this study will be useful data for designing differentiated non-face-to-face class strategies in a theory-oriented lecture-type class to improve the core competencies of college students.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.1
• /
• pp.21-26
• /
• 2012

In this investigation, the aerodynamic performance evaluation of a 1MW class blade has been performed with the purpose of the verification of target output and its clear understanding of flow field using CFD commercial code, ANSYS FLUENT. Before making progress of CFD analysis the HERACLES V2.0 software based on blade element momentum theory was applied for confirmation of quick and approximate performance in the preliminary stage. The blade was designed to produce the target output of a 1MW class at a rated wind speed of 12m/s, which consists of five different airfoils such as FFA W-301, DU91-W250, DU93-W-210, NACA 63418 and NACA 63415 from hub to tip. The mechanical power by CFD is approximately 1.195MW, which is converted into the electrical power of 1.075MW if the system loss is considered to be 0.877.