• 제목/요약/키워드: circulating fluidized bed combustion fly ash

검색결과 25건 처리시간 0.026초

석회석 입도의 변화가 석탄회의 성상에 미치는 영향에 관한 연구 (A Study on Characteristics of Fly and Bed Ash in Circulating Fluidized Bed Combustion Boiler According to Particle Size of Limestone)

  • 정진도;김장우;하준호
    • 한국환경과학회지
    • /
    • 제15권6호
    • /
    • pp.587-592
    • /
    • 2006
  • The advantage of CFBC(Circulating fluidized bed combustor) is that it can apply to various fuel sources including the lower rank fuel and remove SOx by means of direct supply of limestone to the combustor without additional desulfation facility. In this paper, we denote characteristics of fly and bed ash to reuse finer limestone usually abandoned(used spec[Coarse LS] 0.1mm under 25%, new spec[Fine LS] 0.1mm under 50%). According to the results, the chemical composition of fly ash was as follows; $SiO_2\;40.8%,\;Al_2O_3\;31.9%,\;CaO\;10.7%,\;K_2O\;4.46%$ in the case of coarse limestone and $SiO_2\;41.1%,\;Al_2O_3\;31.3%,\;CaO\;10.9%,\;K_2O\;4.66%$ in the case of fine limestone. The chemical composition of bed ash was as follows; $SiO_2\;54.2%,\;Al_2O_3\;33.1%,\;CaO\;1.56%,\;K_2O\;4.34%$ in the case of coarse limestone and $SiO_2\;53.8%,\;Al_2O_3\;32.6%,\;CaO\;2.21%,\;K_2O\;4.45%$ in the case of fine limestone. It showed that there was no significant change in chemical composition. And it is conformed that there was no significant change in particle size and shapes.

베트남 순환유동층 발전(CFBC) 플라이애시 고화재를 사용한 심층혼합 처리공법(DCM) 시험시공 사례 (A Case Study on the Test Execution for DCM using Vietnam CFBC Fly Ash Solidification Material)

  • 김기석;이동원;이재원;권용규;유지형;즈엉수언호앙;정찬묵;민경남
    • 자원리싸이클링
    • /
    • 제27권5호
    • /
    • pp.38-48
    • /
    • 2018
  • 심층처리혼합공법은 다양한 지반조건에서 개량을 위해 사용되고 있으며 그 기술개발은 개량을 위한 고화재의 성능향상과 고화재와 토사의 혼합효율 향상을 바탕으로 이루어지고 있다. 본 연구에서는 베트남 지역에서 발생하는 순환유동층 발전 플라이애시를 사용한 고화재로 실트질 점토지반을 1내지 3 MPa의 강도를 갖도록 개량하는 것이 가능하였으며, 혼합효율을 향상시킨 개량비트를 사용하여 시험시공을 진행한 결과 기존비트 대비 균질한 구근을 형성하여 강도의 표준편차를 1.0 MPa 이상에서 0.322 MPa로 줄일 수 있었다.

고칼슘 플라이애쉬를 이용한 알칼리 활성화제 무첨가 저강도 유동화 채움재 특성 평가 (The Characterization of Controlled Low Strength Material (CLSM) Using High CaO Fly Ash without Chemical Alkaline Activator)

  • 임상형;추현욱;이우진;이창호
    • 한국지반환경공학회 논문집
    • /
    • 제17권12호
    • /
    • pp.17-26
    • /
    • 2016
  • 본 연구에서는 등급 외 플라이애쉬 중 산화칼슘 함량이 높은 플라이애쉬를 저강도 유동화 채움재(controlled low strength material, CLSM)의 바인더로써 활용 가능성을 알아보았다. 사용된 플라이애쉬는 상대적으로 산화칼슘 함량이 높은 플라이애쉬를 배출하는 유동층형 보일러(circulating fluidized bed combustion boiler, CFBC)에서 시료를 채집하여 사용하였다. 배합한 시료의 유동성, 일축압축강도, 단위중량 등을 파악하여 CLSM 시료의 공학적 특징을 알아보았으며, 미세구조관찰과 X선 회절분석을 통한 CLSM 시료의 경화 메커니즘을 파악하였다. 실험 수행 결과 유동성을 만족하는 함수비는 42에서 85%의 범위를 보였으며, 유동성 시험 결과 골재의 종류와 관계없이 골재율이 증가함에 따라 유동성이 증가하는 것으로 나타났다. 일축압축강도는 0.3MPa에서 1.9MPa의 분포를 보였다. 규사를 골재로 사용한 경우 골재율이 증가함에 따라 일축압축강도는 증가하였으나, 바텀애쉬를 골재로 사용한 경우 골재율이 증가함에 따라 일축압축강도는 감소하였다. 미세구조관찰 결과와 X선 회절분석을 통해 CLSM 시료는 고분자 중합반응과 시멘트 수화반응을 통해 강도를 발현하는 것으로 확인하였다. 본 연구의 결과로부터 산화칼슘 함량이 높은 플라이애쉬의 자체 경화성을 이용하여 저강도 유동화 채움재로써 활용이 가능하다고 판단된다.

화력발전소에서 생성된 크링커에 대한 연구 (Studies on the clinker formed in thermal power plants)

  • 박현주;남창현;윤여찬;이태원
    • 한국연소학회지
    • /
    • 제8권2호
    • /
    • pp.34-40
    • /
    • 2003
  • Analyses for concentration, surface phenomena, and crystal structure were performed to identify the causes of clinker formation in three type of pulverized coal fired boilers. Some clinkers had partially molten surface and more CaO and $Fe_2O_3$ as compared with fly ash, and the major crystalline phases identified in the clinker were mullite and quartz. Clinkers were formed in high temperature zone of the boiler according to the identification of mullite by XRD. Free $SiO_2$ in sand combined with K, Na and Ca in limestone served as a fluxing agent to form clinkers in a circulating bed boiler.

  • PDF

순환유동층보일러의 Fly Ash, Bottom Ash를 활용한 채움재 개발에 관한 기초연구 (A Basic Study on the Development of Backfill Material with Fly Ash and Bottom Ash of Circulating Fluid Bed Combustion)

  • 조용광;이용무;남성영;김춘식;서신석;조성현;이형우;안지환
    • 한국건축시공학회지
    • /
    • 제18권1호
    • /
    • pp.25-31
    • /
    • 2018
  • 본 연구는 순환유동층보일러(CFBC)에서 발생되는 바닥재와 비산재를 활용한 저강도 고유동 채움재를 개발하였다. CFBC비산재(CFBC-F) 와 CFBC바닥재(CFBC-B)는 불규칙한 입자 형상을 가지고 있는 것과 유해성 분석결과 환경적으로 안정한 것을 확인하였다. CFBC-F가 첨가될 경우 단위수량이 증가하였다. 길이변화율은 기건양생 조건에서는 -0.05~-0.50% 범위의 수축이 발생하였으며, 밀봉양생 조건에서는 0.1~0.6%의 범위의 팽창이 발생하였다. 압축강도는 밀봉양생 조건에서는 장기적으로 수화반응을 진행할 수 있는 충분한 수분이 남아 있어 기건양생 조건 대비 압축강도가 증가 하는 것을 확인하였다. 본 연구에서 도출된 결과는 저강도 고유동 채움재 개발 및 CFBC 석탄재 활용에 있어 도움이 될 것이라 생각된다.

Carbonation Behavior of Lightweight Foamed Concrete Using Coal Fly Ash

  • Lee, Jae Hoon;Lee, Ki Gang
    • 한국세라믹학회지
    • /
    • 제53권3호
    • /
    • pp.354-361
    • /
    • 2016
  • The purpose of this study was to prepare lightweight foamed concrete by mixing coal fly ash of circulating fluidized bed combustion(CFBC) with cement, and to develop uses for recycling by analyzing carbonation behavior resulting from a change in conditions for pressurized carbonation. For concrete, CFBC coal fly ash was mixed with Portland cement to the water-binder ratio of 0.5, and aging was applied at room temperature after 3 days of curing at $20^{\circ}C$, RH 60%. For carbonation, temperature was fixed at $60^{\circ}C$ and time at 1 h in the use of autoclave. Pressures were controlled to be $5kgf/cm^2$ and the supercritical condition of $80kgf/cm^2$, and gas compositions were employed as $CO_2$ 100% and $CO_2$ 15%+N2 85%. In the characteristics of produced lightweight concrete, the characteristics of lightweight foamed concrete resulting from carbonation reaction were affirmed through rate of weight change, carbonation depth test, air permeability, and processing analysis for the day 28 specimen. Based on these results, it is concluded that the present approach could provide a viable method for mass production of eco-friendly lightweight foamed concrete from CFBC coal fly ash stabilized by carbonation.

염색슬러지 탄화물과 순환 유동층 연소 보일러 플라이애시를 활용한 무시멘트 경화체의 역학적 특성 (Mechanical Properties of Non-cement Matrix Utilizing the Circulating Fluidized Bed Combustion Boiler Fly Ash and Dyeing Sludge Carbide)

  • 김태현;이승호;이용;신진현;이상수
    • 한국건설순환자원학회논문집
    • /
    • 제4권4호
    • /
    • pp.425-430
    • /
    • 2016
  • 산업의 급격한 발달과 함께 사회 또한 급격한 발달을 이루면서 전 세계는 편리한 생활을 이룰 수 있게 되었다. 하지만 이러한 산업의 발달의 이면에는 환경오염으로 인한 지구온난화와 산업부산물 대량 발생 등의 문제가 발생하고 있는 실정이다. 이에 본 연구는 건축분야에서 $CO_2$ 배출 비율이 높은 시멘트의 사용량을 줄이고자 산업부산물인 고로슬래그와 순환 유동층 연소 플라이애시를 사용하였으며, 국내 염색공단에서 배출되고 있는 20만 톤 이상의 슬러지를 재활용하는 방안을 검토하기 위해 염색슬러지 탄화물을 활용한 무시멘트 경화체의 특성에 대한 기초자료를 제시하고자 하였다. 그 결과, 염색슬러지 탄화물의 치환율이 증가함에 따라 공기량은 증가하였고 플로어는 증가하였다. 또한 염색슬러지 탄화물 치환율이 증가함에 따라 휨강도 및 압축강도는 감소하는 경향을 보였다.

발전소 비산재를 결합재로 활용한 로내탈황용 석회 흡수제의 탈황효율 (Desulfurization Efficiency of Lime Absorbent in In-Furnace Desulfurization as Fly Ash Binder in Power Plant)

  • 서준형;백철승;조진상;안지환;윤도영;조계홍
    • 자원리싸이클링
    • /
    • 제27권3호
    • /
    • pp.58-65
    • /
    • 2018
  • 국내 순환유동층보일러형 발전소에서 발생하는 석탄재의 재활용을 위해 석회석 미분말과 CFBC 비산재를 이용하여 0.2~0.4 mm 크기를 가지는 석회계 흡수제를 제조하였다. 석회계 흡수제에 소석회를 소량 혼합한 결과 칼슘실리케이트 성분이 입자 표면에 형성되어 강도가 향상되었으며, 탈황특성을 비교한 결과 상업적으로 사용되고 있는 로내탈황용 석회석보다 약 10% 정도 높은 전환율을 가진 것으로 나타나 탈황 흡수제로 활용 가능함을 확인하였다.

순환유동층에서 유.무연탄 혼소 특성 (Characteristics of Co-Combustion of Korean Anthracite with Bituminous Coal in a Circulating Fluidized Bed)

  • 이종민;김재성;이은모
    • 한국연소학회지
    • /
    • 제10권3호
    • /
    • pp.1-9
    • /
    • 2005
  • The characteristics of co-combustion of Korean anthracite and bituminous coal was determined in a TGA and a lab-scale CFB reactor. The combustion reactivity of Korean anthracite (E = 51.2 kcal/mol) was much lower than that of bituminous coal (E = 14.5 kcal/mol). As the addition amount of the bituminous coal into the anthracite was increased, the reactivity of the anthracite was found to be improved. The effluent rate of the emission gases from the CFB reactor was not changed appreciably when each coal burned. As the bituminous coal was added, however, the effluent rate of the emissions was increased. The unburned carbon in fly ash from the CFB reactor was decreased with increasing the ratio of bituminous coal in co-combustion. But as the ratio of the bituminous coal was larger than 40 %, the combustion reactivity was not increased any more.

  • PDF

2 MWe 순환유동층 발전 플랜트에서 유연탄과 북한 무연탄 혼소시험 특성 연구 (A Study of Co-Combustion Characteristics of North Korean Anthracite and Bituminous Coal in 2 MWe CFBC Power Plant)

  • 한근희;현주수;최원길;이종섭
    • Korean Chemical Engineering Research
    • /
    • 제47권5호
    • /
    • pp.580-586
    • /
    • 2009
  • 본 연구에서는 2 MWe 규모 순환유동층 발전소에서 중국산 유연탄과 북한산 무연탄의 혼합연소특성을 실험적으로 고찰하였다. 중국유연탄과 호주유연탄을 과잉공기량과 층온도 등을 변수로 실험한 결과, 연소효율은 석탄입자의 입도와 석탄중의 휘발분의 영향을 받으며, 이 때 미연탄소분은 Fly ash 5~7%, 바닥회 0.3% 수준으로 중국 유연탄의 연소효율은 99.5% 이상을 보였다. 북한산 무연탄과 유연탄의 혼소시 혼합비 20%에서 무연탄의 평균입도가 작아 연소실에서 비산되는 입자로 인해 연소효율은 5% 이상 저하되었다, 그러나 $SO_2$와 NOx의 배출농도는 크게 변화하지 않았다. 배출되는 대기오염물질의 농도는 $NO_x$ 200~250 ppm($O_2$ 6%), $SO_2$ 100~320 ppm($O_2$ 6%)이었다. SCR 공정에서 2~13 l/min 범위의 $NH_3$ 공급으로 30~65%의 $NO_x$가 저감되었다. Limestone을 이용한 노내탈황에서 약 Ca/S 몰비 6.5를 공급했을 때 $SO_2$가 75% 제거되었고, $Mg(OH)_2$를 흡수제로 하는 FGD를 운전했을 때 pH 5.0 이상에서 100% 탈황효과를 보였다.