• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.72-99
• /
• 2012

Cheomseongdae, Korea's so-called "star-gazing tower" located in the former Silla Dynasty capital of Gyeongju, is generally believed to have maintained its original shape since its construction in 647. The stone structure was closely examined and measured by Gyeongju National Museum in 1962 and reexamined by Korean National Research Institute of Cultural Heritage in 2009. This research noted the following structural anomalies of Cheomseongdae. A corner of the top rectangle layer was broken diagonally in a form that can never be attributed to a natural cause. The four metal clamps under the top rectangle layer had been missing. Four grooves, with unknown usage, exist on the sides of the long rectangular stones projected out of the circular body at the second and third circular layers from the top. On the second circular layer from the top, there are three flat stones, less than a half as tall as their surrounding stones. The average height of the third circular layer from the top is only 23.5 cm, while the overall average of the entire 27 circular layers is 29.9cm. This research postulates that all these anomalies are due to prior destructions and improper restorations of the structure. The first destruction and restoration of Cheomsengdae was likely to have occurred before the mid 15th century. The damages might include a pavilion on the top of the structure and a stone with the name of the structure carved in. The Mongolian invasion in the 13th century was a most likely cause. After the restoration, the structure suffered at least another attack. The damages on the top layer and the missing iron clamps were due to the later attack. The grooves and flat stones were to house holding device that affixed certain objects to the outer surface of the circular body. The metal or stone objects might have faced upward at the four corners of Chemseongdae, bridging the gaps between the rectangle layers and circular layers. The current Chemseongdae lost at least the four affixed objects, four holding devices, and one flat stone.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.3
• /
• pp.296-314
• /
• 2016

This paper presents experimental and computational investigations of synthetic jets with a circular exit for improving flow control performance. First, the flow feature and vortex structure of a multiple serial circular exit were numerically analyzed from the view point of flow control effect under a cross flow condition. In order to improve separation control performance, experimental and numerical studies were conducted according to several key parameters, such as hole diameter, hole gap, the number of hole, jet array, and phase difference. Experiments were carried out in a quiescent condition and a forced separated flow condition using piezoelectrically driven synthetic jets. Jet characteristics were compared by measuring velocity profiles and pressure distributions. The interaction of synthetic jets with a freestream was examined by analyzing vortical structure characteristics. For separation control performance, separated flow over an airfoil at high angles of attack was employed and the flow control performance of the proposed synthetic jet was verified by measuring aerodynamic coefficient. The circular exit with a suitable hole parameter provides stable and persistent jet vortices that do beneficially affect separation control. This demonstrates the flow control performance of circular exit array could be remarkably improved by applying a set of suitable hole parameters.

• Wind and Structures
• /
• v.11 no.3
• /
• pp.221-240
• /
• 2008

The spanwise flow structure around a rigid smooth circular cylinder model in cross-flow has been investigated based on the experimental data obtained from a series of wind tunnel tests. Surface pressures were collected at five spanwise locations along the cylinder over a Reynolds number range of $1.14{\times}15^5$ to $5.85{\times}10^5$, which covered sub-critical, single-bubble and two-bubble regimes in the critical range. Separation angles were deduced from curve fitted to the surface pressure data. In addition, spanwise correlations and power spectra analyses were employed to study the spatial structure of flow. Results at different spanwise locations show that the transition into single-bubble and two-bubble regimes could occur at marginally different Reynolds numbers which expresses the presence of overlap regions in between the single-bubble regime and its former and later regimes. This indicates the existence of three-dimensional flow around the circular cylinder in cross-flow, which is also supported by the observed cell-like surface pressure patterns. Relatively strong spanwise correlation of the flow characteristics is observed before each transition within the critical regime, or formation of first and second separation-bubbles. It is also noted that these organized flow structures might lead to greater overall aerodynamic forces on a circular cylinder in cross-flow within the critical Reynolds number regime.

• Journal of the Korean Society of Combustion
• /
• v.6 no.1
• /
• pp.1-6
• /
• 2001

To evaluate the effect of lobed structure on pollutant emission, an experimental study examines NOx and CO emissions associated with four burner geometries, such as a conventional circular burner and three lobed ones. Rapid mixing allowed by the lobed burner to produce lean premixed flames, with narrower flame stability diagram than for the conventional circular one. Conventional circular burner of wide and uniform burner rim has an advantage of flame stabilization. Correlation on fuel discharge velocity for flame blowout should be included a variable related to the wall effect of the burner. NOx emission reduces by about 5% at the burner with lobed structure in fuel discharge side compared to conventional circular one. This is due to lower flame temperatures through flame elongation and increased radiative heat losses, caused by partially luminous flame in flame front. Meanwhile, at the burner with lobed structure in air discharge side and both fuel and air discharge sides, NOx emission somewhat increases with reduced radiative heat losses in spite of flame elongation. Therefore, the rapid mixing by lobed structure does not always have an advantage on NOx reduction.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.151-152
• /
• 2007

In this study, the optical porosity of $TiO_2$ films with helical structure deposited by glancing angle deposition (GLAD) were investigated. Helical films are of interest due to their ability to differentiate states of circularly polarized light. We designed and fabricated normal-incidence circular-polarization separator deposited by GLAD (Helical structure). The optical porosity of $TiO_2$ film deposited by helical method can be applied many optical coatings.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.3 no.1
• /
• pp.8-13
• /
• 2000

The singularity system to represent two circular cylinders poised under different ambient flow fields is considered in the present research. The singularity system, being composed of a series of singularities, has to be truncated for numerical calculations. A rational criterion to determine how many terms of this series should be retained to maintain the prescribed accuracy is provided through analysis of the converging property of the series. A particular emphasis is put to how to deal with the discrete vortex model of a boundary layer, this possibility being the basis for the development of a tool to simulate vortex shedding from a structure composed of two circular cylinders. The principle to obtain the present singularity system can be applied to more-than-cylinders structure. Only th series become much more complex with increase of the number of cylinders.

• Korean Journal of Remote Sensing
• /
• v.7 no.2
• /
• pp.95-111
• /
• 1991

The study is to analyze and interpret lineaments and circular/arc structures on the Landsat TM images which cover the Korean peninsula and the attched islands except the Ulneung island. The Landsat TM images which cover the Korean territory are 23 scenes, and band 3 and band 5 were selected for the study from seven bands, because the both vands are sensitive on soil moisture and geological materials. Lineament trend analysis Sinian direction (NNE-SSW), Pyeongan direction(NW-SE), Yodong direction(NE-SW), Korean direction(NNW-SSE) and Danyang direction (WNW-ESE) are predominant lineament trands of Korea. Circular/arc structures can be devided into four categories according to their origin; 1) volcanic activity origin, 2) granite intrusion oringin, 3) structural origin and 4) the others.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.5
• /
• pp.844-854
• /
• 2016

In order to understand the current state of production and pattern design of circular knitted jackets, this study selected 11 female clothing brands based from the "2012/2013 Korea Fashion Brand Yearbook" and interviewed the staff in charge of patterns at the companies. Polyester and polyurethane were found to be synthesized and used for the outshell of circular knitted jackets, alternatively natural fabric cotton or wool were synthesized with rayon. As for the structure of circular knitted materials, Ponte Di Roma knitting structure (a modified form of a double knit) was most often used. Surveying the use pattern and the parts for padding cloth, six responded that they used elastic padding cloth. As for circular knitted jackets with inner lining, elastic padding cloth was attached to all parts (front, back, side panel, and collar - except for sleeves) of the basic bodice pattern. Eight responded that they did not use a basic pattern when designing a pattern, which exceeds the majority. All respondents answered yes to the question on if there is any difference in designing a pattern for a woven jacket and a circular knitted jacket. It was found that they designed a pattern that considered shrinkage and elongation, which are the features of circular knitted fabric. Shrinkage and elongation were the features of a fabric material most considered when designing patterns for a circular knitted jacket.

• ETRI Journal
• /
• v.30 no.5
• /
• pp.718-722
• /
• 2008

In this paper, a design for a novel microstrip antenna with circular polarization diversity is proposed and experimentally investigated. This antenna is excited by a microstrip line, which is located at the corner of a circular patch. The polarization state can be switched electrically by setting a diode to on or off. The novel structure we describe here enables the optimization of the input match for both polarizations. From the measured result, good axial ratios are observed at the operating frequencies.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.87-90
• /
• 2000

In this paper. we present a method for a systematic design of a dielectric slab polarizer in the circular waveguide. This structure is realized using a tapered dielectric slab inside a circular waveguide. Commercial software is used to obtain the equivalent dielectric constant of the circular waveguide partially filled with a dielectric slab. The length of the tapered region is determined so that the reflection from the dielectric slab is sufficiently low. A polarizer operating at 10 GHz band is designed, fabricated and tested.