• 한국입자에어로졸학회지
• /
• 제17권4호
• /
• pp.81-89
• /
• 2021

Understanding particle-laden flow around cylindrical bodies is essential for the better design of various applications such as filters. In this study, laminar flows around two tandem cylinders and the motions of particles in the flow are numerically investigated at low Reynolds numbers. We aim to reveal the effects of the spacing between cylinders, Reynolds number and particle Stokes number on the characteristics of particle trajectories. When the cylinders are placed close, the unsteady flow inside the inter-cylinder gap at Re = 100 shows a considerable modification. However, the steady recirculation flow in the wake at Re = 10 and 40 shows an insignificant change. The change in the flow structure leads to the variation of particle dispersion pattern, particularly of small Stokes number particles. However, the dispersion of particles with a large Stokes number is hardly affected by the flow structure. As a result, few particles are observed in the cylinder gap regardless of the cylinder spacing and the Reynolds number. The deposition efficiency of the upstream cylinder shows no difference from that of a single cylinder, increasing as the Stokes number increases. However, the deposition on the downstream cylinder is found only at Re = 100 with large spacing. At this time, the deposition efficiency is generally small compared to that of an upstream cylinder, and the deposition location is also changed with no deposited particles near the stagnation point.

• 한국의류학회지
• /
• 제34권1호
• /
• pp.50-66
• /
• 2010

This Shanghai region study is a sample survey of female college students in their early 20s. This study collected and analyzed the information of shapes through a direct contact survey to understand the breast figures and the measurements of bodies to provide basic information to improve brassiere production for adult females in China. Data was analyzed through a SAS 9.0. The characteristic of the final brassiere pattern that had been corrected and complemented from the results of the $l^{st},\;2^{nd},\;3^{rd}$, and $4^{th}$ fitting tests is defined as a brassiere inserted with a round wire that has the 3/4cup to wrap the bust area by about 3/4. It consists of an upper and lower nonwoven fabric cup that has a flat-shaped wing of a circular dart. The drawing method of the pattern of this brassiere is applied with the conditions to cover the body naturally under the diverse and organic relations of the material factor of stretch material and wire, functional factor, and sewing factor. The final pattern is created as a bigger angle of wing pattern and a short inner side diameter because there are more Chinese women with a back of bending figure compared to Korean women.

• 한국산업정보학회논문지
• /
• 제9권2호
• /
• pp.81-88
• /
• 2004

잡음을 갖는 영상의 크기와 회전불변 패턴인식을 위한 광 웨이블릿 CHF-fSDF((wavelet circular harmonic function-filter modulation synthetic discriminant function, WCHF-fSDF) 필터를 제안하였다. 웨이블릿 CHF-fSDF 필터는 기준영상에 대하여 크기변화된 영상들을 웨이블릿 변환한 후, 이들로부터 추출한 단일 원형고조함수를 학습영상으로 사용하여 합성한다. 제안된 광 웨이블릿 CHF-fSDF 필터는 정합필터의 형태로서 전통적인 4f 광 상관기에 적용할 수 있도록 하였다. 컴퓨터 모의실험을 통하여 제안된 필터는 크기변화와 회전에 무관한 상관출력을 나타내며 특히 잡음환경하에서 유용함을 확인하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권3호
• /
• pp.131-136
• /
• 2016

The present paper shows that beamforming algorithm such as Minimum Variance Distortionless Response (MVDR) based on array antenna signal processing can have not only anti-jamming but also anti-spoofing characteristics. A beam pattern due to the beamforming algorithm strengthens received signal power as it is formed in the incident direction of desired signal. During the process, the effect of unnecessary signals such as spoofing signals can be reduced because the beam pattern reduces received signal power in the incident directions excluding the beam pattern-directed direction. In order to analyze the anti-spoofing effect due to the beamforming algorithm, a software-based simulation environment was configured. An arbitrary error was applied between incident direction of Global Positioning System (GPS) satellite signal and steering vector direction of the beamforming algorithm to analyze the received signal power and required conditions were provided to see the anti-spoofing effect due to the beamforming algorithm. The used antenna was 7-element planar circular array and beam patterns were formed through the MVDR algorithm.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.67-70
• /
• 2003

Hard disk drives (HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speeds requires an improved understanding of fluid motion in the space between disks. Laser sheet and digital camera was used for 2-dimensional visualization of the unsteady flow between the center pair of two co-rotating disks in air with a cylindrical enclosure (or shroud). Geometric parameters are gap height (H) between disks, and gap distance (G) between disk tip and shroud. The lobe-structured boundary between inner region and outer region was detected by inserted particles, and the number of dominant vortices was determined clearly It is found from flow visualization that the number of vortex cells can be correlated with Reynolds number based on H which is defined as $Re_H={\Omega}RH/v$ ranging from $3.18\times10^3\;to\;1.43\times10^4$, and decreases as the disk speed increases. The lobe pattern by vortex cells is changed to a circular pattern for the wide gap than narrow one.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.131-134
• /
• 2007

본 논문에서는 알고리즘의 테스트 패턴중 하나인 1D-CZP패턴의 하드웨어 구현을 제안한다. FPGA를 통한 알고리즘 검증 시 센서로부터 받아들이는 정보로만은 알고리즘의 완벽한 장상작동 유무를 판단하기 어렵기 때문에, 내부 패턴 Generator를 사용하여 센서의 정보와 함께 알고리즘의 정상작동 유무를 판단하게 된다. 본 논문은 필터의 주파수 특성 판단에 용이하며, 입력이 랜덤한 특징을 가지는 1D-CZP패턴을 ROM Table형태로 구현하며, 구현 시 사용되는 Modulus연산을 효율적으로 수정함으로, 하드웨어 사이즈가 작아진 1D-CZP패턴을 제안한다.

• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.92-98
• /
• 2014

Transmission fluid film behaviors in the gap between the wet clutch pad and separator plate are analyzed using the CFD software ADINA. Three pattern groove designs are selected and are used to validate the fluid film behaviors based on the outlet flow in the gap when the wet clutch pad and separator plate are engaged. The main design goal for pattern grooves is faster engagement. In most cases, much of the outlet flow of transmission fluid in the gap occurs on the outer radius boundary due to the centrifugal force generated by the clutch pad circular motion. Groove patterns are created to ensure faster transmission fluid outlet flow in the direction of the inner radius boundary. Computational results of the selected groove patterns are compared.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1661-1665
• /
• 2004

Hard disk drives (HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speeds requires an improved understanding of fluid motion in the space between disks. Laser sheet and digital camera was used for 2-dimensional visualization of the unsteady flow between co-rotating disks in air with a cylindrical enclosure (or shroud). Geometric parameters are gap height (H) between disks, and gap distance (G) between disk tip and shroud. The lobe-structured boundary between inner region and outer region was detected by inserted particles, and the number of dominant vortices was determined clearly It is found from flow visualization that the number of vortex cells can be correlated with Reynolds number based on H which is defined as $Re_H={\Omega}RH/v$ ranging from $7.96{\times}10^2$ to $1.43{\times}10^4$, and decreases as the disk speed increases. The lobe pattern by vortex cells is changed to a circular pattern for the wide gap than narrow one.

• 한국의상디자인학회지
• /
• 제10권2호
• /
• pp.179-191
• /
• 2008

This study investigated Korean image preferences in casual wear of women consumers and the effects of demographic characteristics on Korean image preferences in casual wear. The subjects of the study were 653 women consumers who lived in Seoul. Data were collected during July, 2007. Statistical analyses used in the study were frequency, ANOVA and Duncan test. The results showed that respondents preferred to express Korean image by color in their casual wear. When it comes to specific preferences for pattern, fabric, and color, circular shape was most preferred as pattern, cotton was most preferred as fabric, and white color was most preferred as color. In addition, there were demographic differences in regard to preferences for pattern, fabric, color, and types of casual wear. The results showed that there were differences in age, occupation, income, and residence. For example, in regard to age, there were differences in the preferences for fabric, color, and types of casual wear. The older respondents preferred natural fabrics more while the younger respondents seemed to accept synthetic fabrics in their casual wear. Also, women aged over 40 preferred cotton pants for their casual wear. This study showed that demographic characteristics are important variables in segmenting the preferences of Korean image for casual wear market.

• Macromolecular Research
• /
• 제17권3호
• /
• pp.181-186
• /
• 2009

We fabricated ordered micro/nano patterns induced by controlled dewetting on the topographically patterned PS/P4VP bilayer thin film. The method is based on utilizing microimprinting lithography to induce a topographically heterogeneous bilayer film that allows the controlled dewetting upon subsequent thermal annealing. The dewetting that was initiated strictly at the boundary of the thicker and thinner regions was guided by the presence of the topographic structure. The dewetting front velocity of the microdomains in the confined regions was linearly proportional to the measurement time, which enabled us to control the size of the dewet domain with annealing time. In particular, the submicron sized dot arrays between lines were generated with ease when the dewetting was confined into geometry with a few microns in size. The kinetically driven, non-lithographical pattern structures accompanied the pattern reduction to 400%. The pattern arrays on a transparent glass substrate were especially useful for non-circular microlens arrays where the focal length of the lens was easily tunable by controlling the thermal annealing.