• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.282-287
• /
• 2007

A circular UHF RFID tag has been designed. This circular tag antenna can be optimized simply by controling two parameters, outer radius and inner radius of the tag antenna. The resistance and resistance values of the tag antenna have been researched based on the variation of inner and outer radii of the circular tag antenna. The simulation and measurement results are compared.

• ETRI Journal
• /
• v.30 no.5
• /
• pp.718-722
• /
• 2008

In this paper, a design for a novel microstrip antenna with circular polarization diversity is proposed and experimentally investigated. This antenna is excited by a microstrip line, which is located at the corner of a circular patch. The polarization state can be switched electrically by setting a diode to on or off. The novel structure we describe here enables the optimization of the input match for both polarizations. From the measured result, good axial ratios are observed at the operating frequencies.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.684-689
• /
• 1990

We design a circular microstrip array antenna using the admittance of circular resonator. We can design the array antenna, considering equivalent radius of circular microstdrip consistant with conductances which are obtained from excitation coefficeients of the array elements. The antenna with 10 array elements are made on teflon substrate from Tshebyscheff method. It's perfermence are the gain 8.9dB, half power beam width 11.3dge, max, side lobe level -19dB, and they are almost in agreement with the theoretical results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.7 s.110
• /
• pp.605-614
• /
• 2006

In this paper, a 3D structure skimmer-shaped circular microstrip antenna is designed, the ends of whose both sides are made as DC(Depressed Carving part) applying perturbation effect to reduce the patch size of microstrip antenna operating at design frequency 1.575 GHz. The result shows its return loss, - 10 dB bandwidth, gain, - 3 dB beamwidth E, H-plane are -26.59 dB, 65 MHz(4.13 %), 4.66 dBd, $79^{\circ},\;87^{\circ}$ respectively. The diameter of the antenna is 85 mm, which is 12.4 % reduced compared to the size(97 mm) of general microstrip patch antenna. Therefore its area reduction is 23.2 %. Furthermore, a linear and circular polarized baseball-shaped circular microstrip antenna is designed to minimize the patch size of the antenna. This structure of antenna operating at the design frequency 1.575 GHz is applied with the optimum RC(Raised Carving part) & DC ratio and an asymptotic line angle. In case of linear polarized baseball-shaped circular microstrip antenna, the patch size of the antenna is 74 mm, which is 41.8 % area reduction compared to general microstrip patch antenna. In case of circular polarized baseball-shaped circular microstrip antenna, the diameter of patch is 82 mm, which is 28.5 % area reduction compare to general microstrip patch antenna linear polarized. We have verified that the perturbation effect can be applied to minimize the circular microstrip antenna.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.124-136
• /
• 2001

In this paper, we designed and manufactured the Ku-band circular waveguide antenna to do wireless communication with a ground radar as on-board antenna of missile. Using the MATLAB and the HFSS, we designed the circular polarizer which has a characteristic of circular polarization and broadband using the capacitive pin method, the feeder to feed coaxial line to circular waveguide, and a stopper to prevent a conductor material from being inserted. Then we simulated the designed antenna using the HFSS, obtained the gain and the radiation pattern. Because of a difficulty of manufacture, we established a manufacture process procedure. Antenna is manufactured with this procedure, test results of the manufactured antenna are the axial ratio of 1.37 ~ 1.72, the 3 ㏈ beamwidth of $72.23^{\circ}{\sim}78.54^{\circ},$ and the gain of 3.26 ~ 4.61 ㏈ within frequency band. We knew that these results are similar with simulation results. Also, we confirmed that the manufactured antenna is satisfied with requirement conditions through performance test, environmental test and flight test.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.173-176
• /
• 2012

This paper introduces a novel horn antenna for circular polarization using a planar-type radiator. This antenna can be divided to two parts, microstrip antenna and square horn. The microstrip antenna has the role of feeder and polarizer of the horn antenna, and it is designed to stacked type having metal spacer for high gain, high isolation and wideband characteristic. Using the proposed antenna structure, the horn antenna needs not additional structure such as feeder and polarizer, and the size of it can be considerably reduced. The horn antenna has typical gain of 8dBi and 3-dB axial-ratio bandwidth around 4.9%.This antenna can widely used for various antenna system for mobile and satellite communication using circular polarization expecially in high frequency band.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.43-49
• /
• 2023

In modern wireless communication systems including beamformers or location-based services (LBS), which employ multiple antenna elements, estimating the number of signals is essential for accurately determining the quality of the communication service. Representative signal number estimation algorithms including the Akaike information criterion (AIC) and minimum description length (MDL) algorithms, which are information theoretical criterion models, determine the number of signals based on a reference value that minimizes each criterion. In general, increasing the number of elements mounted onto the array antenna enhances the performance of estimating the number of signals; however, it increases the computational complexity of the estimation algorithm. In addition, various configurations of array antennas for the increased number of antenna elements should be considered to efficiently utilize them in a limited location. In this paper, we introduce an efficient signal number estimation algorithm based on the beamspace based AIC and MDL techniques that reduce the computational complexity by reducing the dimension of a uniform circular array antenna. Since this algorithm is based on a uniform circular array antenna, it presents the advantages of a circular array antenna. The performance of the proposed signal number estimation algorithm is evaluated through computer simulation examples.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2816-2822
• /
• 2014

In this paper, a wideband loop antenna for UWB applications is studied. The structure of the proposed wideband loop antenna is a circular loop antenna with appended circular sectors to obtain an ultra-wideband characteristic. The circular sectors are used instead of conventional triangular sectors to match with the 50 ohm feed line. Optimal design parameters are obtained by analyzing the effects of the gap between the circular sectors and the radius of the circular loop on the input reflection coefficient and gain characteristics. The optimized wideband loop antenna is fabricated on an FR4 substrate with a dimension of 41 mm by 41 mm. Experiment results show that the proposed antenna has a frequency band of 3.1-11.0 GHz for a VSWR < 2.25, which assures the operation in the UWB band. Measured gain ranges 1.3-5.3 dBi in the UWB band.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.643-650
• /
• 2020

The phased array antenna has an advantage enabling rapid beam aim without the mechanical rotation of the antenna, because it arranges multiple elements in a linear or planer (grid or circular) and electronically controls the phase for each element. The planar array antenna is generally used a grid array and a circular array, and the circular form has the higher resolution comparing to the grid form due to the its structural characteristics. However, a concentric circular array (CCA) or a concentric ring array (CRA) with multiple circular arrays which each has different radius is used in the limited area, because the entire radius should be increased for the circular array with a number of elements. In this paper, we introduce the angle-of-arrival (AOA) estimator for an adaptive beamforming satellite system based on CRA and provide the simulation results for performance evaluation. In addition, simulation results are compared and analyzed to the case for the circular array antenna.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.163-168
• /
• 2011

A Fabry-Perot cavity (FPC) antenna producing both high-gain and circularly-polarized (CP) behavior is proposed. To increase antenna gain and obtain CP characteristics, a superstrate composed of square patches with a pair of truncated corners is placed above the linearly polarized patch antenna with an approximately half-wavelength distance from the ground plane at the operating frequency. The proposed antenna has the advantages of high gain, a simple design, and an excellent boresight axial ratio over the operating frequency bandwidth. Moreover, used in an FPC antenna, the proposed superstrate converts a linear polarization produced by a patch antenna into a circular polarization. In addition, the cavity antenna produces left-hand circular-polarization and right-hand circular-polarization when a patch antenna inside the cavity generates x-direction and y-direction polarization, respectively. The measured and simulated results verify the performance of the antenna.