• Steel and Composite Structures
• /
• 제21권6호
• /
• pp.1227-1250
• /
• 2016

Most of the research work has been conducted on K-joints under static loading. Very limited information is available in consideration of fatigue strength of K-joints with concrete-filled chord. This paper aims to describe experimental and numerical investigations on stress concentration factors (SCFs) of concrete-filled circular chord and square braces K-joints under balanced axial loading. Experiment was conducted to study the hot spot stress distribution along the intersection of chord and braces in the two specimens with compacting concrete filled in the chord. The test results of stress distribution curves of two specimens were reported. SCFs of concrete-filled circular chord and square braces K-joints were lower than those of corresponding hollow circular chord and square brace K-joints. The corresponding finite element analysis was also conducted to simulate stress distribution along the brace and chord intersection region of joints. It was achieved that experimental and finite element analysis results had good agreement. Therefore, an extensive parametric study was carried out by using the calibrated finite element model to evaluate the effects of main geometric parameters and concrete strength on the behavior of concrete-filled circular chord and square braces K-joints under balanced axial loading. The SCFs at the hot spot locations obtained from ABAQUS were compared with those calculated by using design formula given in the CIDECT for hollow SHS-SHS K-joints. CIDECT Design Guide was generally quite conservative for predicting SCFs of braces and was dangerous for predicting SCFs of chord in concrete-filled circular chord and square braces K-joints. Finally SCF formulae were proposed for circular chord and square braces K-joints with concrete-filled in the chord under balanced axial loading. It is shown that the SCFs calculated from the proposed design equation are generally in agreement with the values derived from finite element analysis, which were proved to be reliable and accurate.

• Journal of Korea Society of Digital Industry and Information Management
• /
• 제7권4호
• /
• pp.1-6
• /
• 2011

In this paper, search-efficient Bi-directional-Chord(B-Chord) is proposed in P2P (peer-to-Peer) overlay network. Chord is the most popular P2P Look-up protocol. However, it applied to the mobile environment, the search success rate become lower and the request delay time increases. That is big problem. Thus, by improving the existing Chord, in this paper proposed B-Chord reduces the request delay time to in a mobile environment. Proposed B-Chord have the two Finger table and can search by selecting Finger table depending on the value of Key. By use these bi-directional, it can reduce the number of nodes Hop and search delay time. Thus, As a result, it will be able to increase the search success rate in a mobile environment.

• Journal of Korea Society of Digital Industry and Information Management
• /
• 제6권4호
• /
• pp.75-81
• /
• 2010

Due to the increasing use of smart phones, using Wifi, Wibro of mobile devices spread. Accordingly, Need of using peer-to-peer file sharing between mobile devices is growing. However, common Peer-to-Peer(P2P) system is too complex and is not suitable to be applied to mobile devices. Thus, the need of research has shown to improve way in a mobile environment that has a constraints as mobility and the scope of communication. Among them, there is a Chord as contents look up algorithm. Chord is the issue. Chord as the DHT-based P2P protocol shares files, index-key and distributed key across the network. However, exist Chord doesn't consider the mobility. So, It has a lot of problems in the mobile environment. Thus, in this paper, I will try to explore an appropriate way of Chord in a mobile environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제31권4B호
• /
• pp.333-343
• /
• 2006

MANET and P2P applications have a common nature that they don't have any fixed infrastructures that might maintain network topologies. With such common characteristics, a P2P application can be a killer application over MANET. Due to absence of reliable node which serves indexing services in MANET, fully distributed P2P applications are more suitable for MANET. By using DHT like Chord, we can save network bandwidth and avoid a point of failure of a directory server. However, since MANET allows nodes to depart from network freely, P2P file sharing applications using Chord lookup protocol should address how to recover the keys stored at the departed node. In this paper, we propose BU-Chord in order to detect and recover the departure of nodes by creating and storing backup file information in distributed manner. Our BU-Chord shows off better performance than existing Chord especially in case of high departure rate of nodes.

• The Journal of the Acoustical Society of Korea
• /
• 제22권4E호
• /
• pp.141-149
• /
• 2003

As music of digital form has been widely used, many people have been interested in the automatic extraction of natural information of music itself, such as key of a music, chord progression, melody progression, tempo, etc. Although some studies have been tried, consistent and reliable results of musical information extraction had not been achieved. In this paper, we propose a method to extract chord and tempo information from general polyphonic music signals. Chord can be expressed by combination of some musical notes and those notes also consist of some frequency components individually. Thus, it is necessary to analyze the frequency components included in musical signal for the extraction of chord information. In this study, we utilize a sinusoidal modeling, which uses sinusoids corresponding to frequencies of musical tones, and show reliable chord extraction results of sinusoidal modeling. We could also find that the tempo of music, which is the one of remarkable feature of music signal, interactively supports the chord extraction idea, if used together. The proposed scheme of musical feature extraction is able to be used in many application fields, such as digital music services using queries of musical features, the operation of music database, and music players mounting chord displaying function, etc.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1319-1320
• /
• 2013

• Proceedings of the KAIS Fall Conference
• /
• 한국산학기술학회 2012년도 춘계학술논문집 1부
• /
• pp.14-16
• /
• 2012

본 논문에서는 현재 Jazz에서 사용되어지는 Major Scale에서 나오는 7개 Chord Scale과 Melodic Minor Scale의 상행인 Jazz Minor Scale에서 나오는 7개 Chord Scale과는 별도로 Harmonic Minor Scale에서 정리해 보았다.

• The Journal of Engineering Research
• /
• 제8권1호
• /
• pp.97-106
• /
• 2006

Chord system, structured P2P system based on distributed hashed table, didn't consider the mobility of mobile device. Mobility of mobile node may cause performance falloff of both mobile node and P2P network. Not only Chord system but also the greater part of P2P system didn't consider the mobility of mobile node. Recently it is researched on mobility in P2P system. In this paper, it proposed the method of the supporting mobility in chord system. Mobile node joins to the P2P network through the stationary node meaning the parents node. Mobile node require or offer the service for the parents node.

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1017-1029
• /
• 2016

When a welded circular hollow section (CHS) tubular joint is subjected to brace axial loading, failure position is located usually at the weld toe on the chord surface due to the weak flexural stiffness of the thin-walled chord. The failure mode is local yielding or buckling in most cases for a tubular joint subjected to axial load at the brace end. Especially when a cyclic axial load is applied, fracture failure at the weld toe may occur because both high stress concentration and welding residual stress along the brace/chord intersection cause the material in this region to become brittle. To improve the ductility as well as to increase the static strength, a tubular joint can be reinforced by increasing the chord thickness locally near the brace/chord intersection. Both experimental investigation and finite element analysis have been carried out to study the hysteretic behaviour of the reinforced tubular joint. In the experimental study, the hysteretic performance of two full-scale circular tubular T-joints subjected to cyclic load in the axial direction of the brace was investigated. The two specimens include a reinforced specimen by increasing the wall thickness of the chord locally at the brace/chord intersection and a corresponding un-reinforced specimen. The hysteretic loops are obtained from the measured load-displacement curves. Based on the hysteretic curves, it is found that the reinforced specimen is more ductile than the un-reinforced one because no fracture failure is observed after experiencing similar loading cycles. The area enclosed by the hysteretic curves of the reinforced specimen is much bigger, which shows that more energy can be dissipated by the reinforced specimen to indicate the advantage of the reinforcing method in resisting seismic action. Additionally, finite element analysis is carried out to study the effect of the thickness and the length of the reinforced chord segment on the hysteretic behaviour of CHS tubular T-joints. The optimized reinforcing method is recommended for design purposes.

• The KIPS Transactions:PartC
• /
• 제16C권6호
• /
• pp.761-772
• /
• 2009

A DHT(Distributed Hash Table) based P2P is a method to overcome disadvantages of the existing unstructured P2P method. If a DHT algorithm is used, it can do a fast data search and maintain search efficiency independent of the number of peer. The peers in the DHT method send messages periodically to keep the routing table updated. In a mobile environment, the peers in the DHT method should send messages more frequently to keep the routing table updated and reduce the failure of a request. Therefore, this results in increase of network traffic. In our previous research, we proposed a method to reduce the update load of the routing table in the existing Chord by updating it in a reactive way, but the reactive method had a disadvantage to generate more traffic than the existing Chord if the number of requests per second becomes large. In this paper, we propose an adaptive method of routing table update to reduce the network traffic. In the proposed method, we apply different routing table update method according to the number of request message per second. If the number of request message per second is smaller than some threshold, we apply the reactive method. Otherwsie, we apply the existing Chord method. We perform experiments using Chord simulator (I3) made by UC Berkeley. The experimental results show the performance improvement of the proposed method compared to the existing methods.