• Journal of the Korean institute of surface engineering
• /
• v.13 no.2
• /
• pp.81-86
• /
• 1980

The mechanical properties of aluminized steel were investigated after the JIS SB 41 plates were dipped in molten aluminum bath. (1) The growth rate of iron-aluminum alloy layer was fast in early stage of alumizing, and then gradually decreased with increasing time. However, over the time period above 10 minutes the growth of alloy layer did not occur. (2) The constituent of alloy layer formed on the steel surface was identified to be intermetallic compound of $Fe_2\;Al_5$. (3) The ultimate tensile strength and elongation of aluminized steel showed a nearly constant value over all thickness below about 0.15 mm. However, both properties decreased rapidly in showed a nearly constant value over all thickness above about 0.20 mm. (4) In case of aluminized steel with greater thickness, crack was formed below yield point of base metal, which is considered to be attributed to the alloy layer failure.

• Animal cells and systems
• /
• v.3 no.1
• /
• pp.47-52
• /
• 1999

Change of proteins was confirmed during low temperature acclimation of overwintering larva, and some biochemical characteristics of the induced antifreeze protein-1 (AFP-1) were investigated in Protaetia brevitarsis. As the freezing point depression by the action of induced AFPs, a considerable thermal hysteresis was observed in the haemolymph and in partially purified proteins. AFP-1 was purified from the cold acclimation larvae by ammonium sulfate precipitation ion exchange chromatography, gel permeation chromatography, and electroelution. The purified AFP-1 was determined to be a glycoprotein (approximately 320 kDa, pl 5.8) composed of a single type of subunit (80 kDa). The high contents of hydrophilic amino acids (Asp, Glu, Lys, Asn, Gln, Arg, Ser, Thr) were also confirmed, showing similarity with antifreeze proteins from other insects.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.2
• /
• pp.192-197
• /
• 2009

In this paper, we proposed the obstacle avoidance system using a single camera image and LM(Levenberg-Marquart) neural network fuzzy controller. According to a robot technology adapt to various fields of industry and public, the robot has to move using self-navigation and obstacle avoidance algorithms. When the robot moves to target point, obstacle avoidance is must-have technology. So in this paper, we present the algorithm that avoidance method based on fuzzy controller by sensing data and image information from a camera and using the LM neural network to minimize the moving error. And then to verify the system performance of the simulation test.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.193-194
• /
• 2007

We propose The Fast Join Mechanism for overlay multicast. This mechanism is provided with RP(Rendezvous Point), SM(Session Manager) and overlay multicast nodes. The RP provides data transfer to overlay multicast nodes and the Session Manager controls overlay multicast nodes to maintain the overlay topology.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.306-309
• /
• 2004

Recently, the environmental problem has received considerable attention. so, many lamps have been developing for environmental requirement and energy efficiency. also, at glow discharge lamp researchers try to reduce energy spending that is power saving lamp. this kind requirement agree with strong points of electrodeless fluorescent lamp has received to now lighting sauce. At low pressure as mTorr I.C.P make high density plasma easily, is good to maintain discharge, has high ionization and does not have failing lighting and losing ability of electron radiation by oxidation and volatilization of electrodes, because this tape does not have electrodes. This point of I.C.P can use at electrodeless fluorescent lamp in this study ICP display elements and Ar, Ne, Kr are researched for optical characteristic. each gas is looked into optical characteristic, also mixed gases is experiment for optical characteristic.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.58-58
• /
• 2000

Recently low resistance of bus line is required for large screen size RFT-CLD panels. As a result, lower resistance Al-alloy is currently reviewed extensively. The resistivity is required smaller than 10$\mu$$\Omega$cm and high resistance of chemical attack is required. In this paper, Al-W thin film were deposited on glass substrates by D.C magnetron sputtering system under various condition for high chemical resistance. Its properties were characterized by SEM, AFM, XRD, 4-point-probe, and cyclic voltammertry. The optimal condition of Al-W was 10$0^{\circ}C$, 100W, 0.4Pa, 23sccm(Ar) and 35$0^{\circ}C$, 20min. annealing. At that condition the resistivity of Al-W(3 wt.%) was about 11$\mu$$\Omega$cm. And when wt.% of W in Al-W alloy was higher than about 4%, Al-W alloy thin film has high chemical resistance.

• Elastomers and Composites
• /
• v.25 no.1
• /
• pp.13-19
• /
• 1990

The purpose of this study is to estabilish the synthetic condition of polyurhethane elastomer for excellent properties. Polyurethane elastomer which have different NCO percentage and hard segment contents was synthesized by casting method. And the effects of hard segment contents were investigated by analytical methods such as IR, DSC, etc. [NCO]/[OH] ratio was proper at the range $1.02{\sim}1.05$. By IR absorption peak($1250cm^{-1}$) which indicate interurethane hydrogen bond it was confirmed that hard segment were crystallized. Melting point that was determined by DSC showed the effects of hard segment contents, phase mixing and crystalline size.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.224-234
• /
• 2012

This paper describes an energy harvesting circuit using solar and vibration energy with MPPT(Maximum Power Point Tracking) control for micro sensor nodes. The designed circuit employs MPPT control to harvest maximum power available from a PZT vibration element and an integrated solar cell. The harvested energies are simultaneously combined and stored in a storage capacitor, and then managed and transferred into sensor node by PMU(Power Management Unit). MPPT controls are implemented using the linear relationship between the open-circuit voltage of an energy transducer and its MPP(Maximum Power Point) voltage. The proposed circuit is designed in a CMOS 0.18um technology and its functionality has been verified through extensive simulations. The designed energy harvesting circuit and integrated solar cell occupy $2.85mm^2$ and $8mm^2$ respectively.

• Journal of Pharmacopuncture
• /
• v.4 no.3
• /
• pp.23-37
• /
• 2001

Objective: The purpose of this study is to develop and activate anti-tumor herbal acupuncture for cancer patients in South Korea. Methods: We investigated some literatures on anti-tumor herbal acupuncture which is used in South Korea and China, and made diagrams. Results: The results are summarized as follows. Anti-tumor herbal acupuncture is one of the traditional oriental medical method which is effective for cancer patients. In domestic studies, most of herb materials are belong to action of cooling&detoxification(25.0%) and strengthening body resistance(46.4%) which are proved to have effects of anti-tumor, immune activation and preventing tumor. In China, point injection therapy are used for improving symptoms of cancer patients and hea1ing tumor. Also herbal intravenous injection is used for combination of chinese traditional and western cancer therapy and treating cancer patients variously. Conclusions: From the above results. it is expected that anti-tumor herbal acupuncture is useful to improve clinical symptoms and quality of life(QOL) of cancer patients. Also we must develop new progressive methods of point injection and herbal intravenous injection for treating cancer patients, and advance clinical studies and trials.

• The Korean Journal of Applied Statistics
• /
• v.22 no.1
• /
• pp.29-39
• /
• 2009

Among others, ROC and CAP curves are used to explore the discriminatory power between the defaults and non-defaults, based on the distribution of the probability of default in credit rating works. ROC and CAP curves are plotted in terms of various ratios of the probability of default. Each point on ROC and CAP curves is calculated according to cutting points (scores) for classifying between defaults and non-defaults. In this paper, adjusted ROC and CAP curves are proposed by using functions of ratios of the probability of default. It is possible to recognize the score corresponding to a point oil these adjusted curves, and we can identify the best score to show the optimal discriminatory power. Moreover, we discuss the relationships between the best score obtained from the adjusted ROC and CAP curves and the score corresponding to Kolmogorov - Smirnov statistic to test the homogeneous distribution functions of the defaults and non-defaults.