• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.965-970
• /
• 2003

This study has been performed to develope a method for the simultaneous determination of 1,4-dioxane (DOX), epichlorohydrin (EPC), propylene chlorohydrin (PCH), ethylene chlorohydrin (ECH) and 1,3-dichloro-2-pro-panol (DCP) in polysorbates, chloline chloride, choline bitartrate, modified starch and spices by purge and trapgas chromatography. Experimental design was used to select a suitable trap by measuring the limit of detection (LOD) and to investigate the effect of temperature and salt of extraction, and the percentage of recovery in various matrix. The LOD of DOX, EPC, PCH, ECH and DCP were 1.38$\mu\textrm{g}$, 0.23$\mu\textrm{g}$, 3.30$\mu\textrm{g}$, 3.97$\mu\textrm{g}$, 20.43$\mu\textrm{g}$ respectively, by means of using Vorcarb 3000 trap with 5$0^{\circ}C$ sample sparger. Excluding EPC, the recoveries of target compounds were above 90% in all matrix. Target compounds in polysorbates (17), choline chloride (5), choline bitartrate (5), modified starch (8) and spices (25) were not detected. But 2.5 ppm of DOX was detected in Tween 80.

• YAKHAK HOEJI
• /
• v.17 no.2
• /
• pp.111-114
• /
• 1973

Je-chun clay, Hwa-soon bentonite, and Hwa-soon montmorillonite were treated with treated with organic solvents, i.e., ethylene glycol, ethanol, n-hexane, dioxane, ethylene chlorohydrin and obtained X-ray diffractograms were compared with those of the original samples. Organic solvent was adsorbed on the basal plane surfaces of Je-chun clay, Hwa-soon bentonite, Hwa-soon montmorillonite and, as a result, the axis spacing ws increased, However, organic solvent did not affect the non-expanding lattice of Japanese acid clay and the basal plane remained unchanged.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.1
• /
• pp.97-124
• /
• 1976

To find out the most effective method of treatments for the induction of sprouting of dormant seed potato pieces for the fall crop production of Irish cobbler, this experiment was carried out with sprout inducing bed and field performance trial. In GA treatments, about 10 days were required to sprout and resulted uniform and thin 3-4 sprouts per tuber piece, but sprouts were slender and rooting was not observed. In Ethrel treatments, 20-25 days were required, and sprouts were inferior than that of GA treatment in uniformity of sprouting, and percentage of rotten pieces and of healthy sprouted tuber pieces, but number of sprouts per tuber pieces was low, being 1-2, and sprouts were short, thick, and healthy, and showed good rooting. In GA and Ethrel mixture treatments, 1-2 more days were required to sprout than GA treatments, but sprouts were relatively healthy, and other sprouting pattern were like that of GA treatments. In Ethylene chlorohydrin and 6-Benzyl-adenine treatments, sprouting was like that of Ethrel treatments, but much more days were required than Ethrel treatments and tendency of severe rotting was observed. Optimum treating methods of promising chemicals found to be 1-2 and 2-5 ppm GA solution, 500 and 1000-2000 ppm Ethrel solution, and 1-2＋250-500 and 5＋250-500 ppm GA and Ethrel mixture solution for 60 min. treatment of tuber piece and whole-tuber, respectively. Induction of sprouting in dry and hot time resulted severer rotting of tuber pieces during the induction of sprouting and with the advancement of dormancy, being delayed in date of treatment, tendency of promotion of sprouting and rooting was observed. When sprouted tuber piece was transplanted at the same date, yields were in order of Ethrel, GA and Ethrel mixture, and GA treatment, indicating the correlation between yield and healthiness of sprout and rooting status of sprouted tuber piece. In all treatments, earlier transplanting resulted higher yields.

• Journal of Food Hygiene and Safety
• /
• v.9 no.1
• /
• pp.43-48
• /
• 1994

Instrumental determination was performed for the analysis of residues of ethylene oxide(EO), ethylene chlorohydrin(ECH) and ethylene glycol(EG) in white ginseng powders which were deaerated for 30 min after EO fumigation. Gas chromatographic data showed that EO residues were 570 ppm in the immediate samples after deaeration and 170 ppm in the stored ones for 8 days at 30$\pm$1$^{\circ}C$, respectively, showing a decreasing tendency with elapsed time. On the other hand, ECH and EG residues in samples as the secondary products of EO were 17, 650 ppm and 727 ppm stored for one month, and 9, 595 ppm and 221 ppm stored for 3 months, respectively.

• Journal of Environmental Health Sciences
• /
• v.8 no.1
• /
• pp.81-97
• /
• 1982

Ethylene oxide gas has been used as a cold sterilant for heat-sensitive medical equipments and as a fumigant for food for more than 30 years, and it is used more widely than radiation although radiation sterilization has made significant inroads in recent years. But according to recent studies of toxicities such as mutagenicity, haemolytic effect and possible carcinogenicity of Ethylene oxide (ETO) and its two main reaction products, Ethylene chlorohydrin (ETCH) and Ethylene glycol (ETG), Environmental Protection Agency in U.S.A. has suggested some regulations on residual gas in drug products and medical devices for human use. The mutagenic activity of ETO compared with that of X-ray has an equivalency of 1 ppm/hr for ETO as compared to 20 mrad for X-ray, and one could suggest the present maximum allowable concentration for ETO (50 ppm) should be 400 times lower than the radiation standard (2.5 mrad/hr). Although radiation sterilization has advantages of simplicity of operation and complete reliability, changes of physico-chemical properties with possible formation of toxic substances may occur. It is therefore necessary to make some regulations of our own for residual toxicities orginated from each sterilization method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.604-608
• /
• 2002

Accelerated solvent extraction (ASE) was used for a rapid and simple extraction of propylenchlorohydrin (PCH) residue in hydroxylpropyl modified starch. The effects of temperature, pressure and extraction solvent on the extraction efficiency were investigated to find the optimal condition of ASE. The optimal conditions for PCH extraction in hydroxylpropyl modified starch were static time of 50 min, purge time of 300 sec, heating time of 5min, temperature of 12$0^{\circ}C$, pressure of 2500 psi, flush (%) with 100 volumes, and ethylacetate as an extraction solvent. The recovery (96.1%) of this method was higher than that (76.4%) of Code of Food Additive. Therefore, the ASE was a good method in both aspects of efficiency and effectiveness.