• Journal of the Mineralogical Society of Korea
• /
• v.29 no.2
• /
• pp.79-87
• /
• 2016

Asian dust (Hwangsa) interacts with light, atmospheric gas, aerosol, and marine ecosystem, affecting Earth climate. Mineralogical properties are essential to understand the interaction between the dust and environments. In this study, we examined the mineralogical properties of Asian dust collected at Deokjeok Island, Incheon, Korea in February 22, 2015. X-ray diffraction (XRD) analyses showed that phyllosilicate minerals (62 wt%) dominate the Asian dust. Illite-smectite series clay minerals (55%) were common with minor chlorite (5%) and kaolinite (2%). Non-phyllosilicate minerals were quartz (18%), plagioclase (10%), K-feldspar (4%), calcite (4%), and gypsum (1%). Similar results were obtained by mineral quantification using scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). Transmission electron microscopy combined with EDS confirmed illite-smectite series clay minerals as the dominant phyllosilicate type. Morphological analyses using SEM showed clay agglomerates, clay-coated quartz, feldspars, and micas. Gypsum grains were common on the particle surface, while calcite nanofibers, previously reported as common on the surface, were rare, indicating the reaction of calcite and acidic atmospheric pollutants to form gypsum. The analytical result of 2015 Asian dust would contribute to the establishment of mineralogical base for the modeling of the interaction between Asian dust and environments.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.165-173
• /
• 2007

The KAERI Underground Research Tunnel (KURT) located in KAERI (Korea Atomic Energy Research Institute) was recently constructed following the site investigation in 2003. Its dimension is 180 m in length, 6 m in width, and 6 m in height, and it has a horseshoe-like cross-sec-lion and is located in the ground to the depth of 90 m. When the tunnel was dug into the ground with 100 m in length, fresh rocks, weathered rocks and fracture-filling materials were taken and examined by mineralogical and chemical analyses. There are phyllosilicate minerals such as illite, smectite and chlorite including calcite, which are filling some faults and cracks of the KURT rock. The illite and smectite usually coexist in the fracture, where their content ratio is different according to which mineral is predominant. There are high concentrations of U and Th in the rocks coated with iron-oxides and filled with secondary materials as compared with those in the fresh rocks. It seems that the radionuclides, which are slowly leached from the parent rocks or exist as a dissolved form in the groundwater and hydrothermal solution, may have been migrated along the fractures and thereafter selectively sorbed and coprecipitated on the iron-oxides and the fracture-filling materials. These results will be very useful far the evaluation of environmental factors affecting the nuclides migration and retardation when long-term safety is considered to the geological disposal of high-level radioactive wastes in the future.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.205-214
• /
• 2005

Some Quaternary faults developed in the eastern block of the Ulsan fault are Gaegok 1, Gaegok 2, Singye, Madong, Wonwonsa and Jinhyeon faults, which are characterized by thin gouge and narrow cataclasitic tones. This study was performed to emphasize the role of mineral alteration and microtexture in response to hydrothermal alteration of fault gouges during fault activity, using XRD, EPMA, BSE (backscattered electron image), and K-Ar age dating methods. Alteration minerals in fault gouges were formed in the age range of $44.3\~28.9Ma$ by hydrothermal alteration attributed to fault activity. XRD results show that fault gouges consist predominantly of clay minerals, quartz and feldspars. Clay minerals formed in the gouge zones are mainly composed of smectite with trace chlorite, illite and kaolinite. The evidence to support the hydrothermal alteration of preexisting minerals due to fault activity are easily recognized at the host rocks in contact with gouges zones. Injected gouge and calcite veins indicate that they were originated from multiple deformation by repeated fault activity. Gouge with green or greenish grey color, for example Jinhyeon fault, contains higher $Al_2O_3$ and lower MgO and CaO compared to those with reddish color. Various colors of fault gouge are intimately related to the chemical compositions of main constituent mineral as well as mineral assemblage.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.1
• /
• pp.21-29
• /
• 2017

Surface soils on Barton Peninsula, King George Island, West Antarctica were investigated to acquire the mineralogical and geochemical data of soil in Antarctica. Multiline of techniques for example, X-ray diffraction (XRD), transmission electron microscopy (TEM)-electron energy loss spectroscopy (EELS), and wet chemistry analysis were performed to measure the composition of clay minerals, Fe-oxidation states, cation exchange capacity, and total cation concentration. Various minerals in sediments such as smectite, illite, chlorite, kaolinite, quartz and plagioclase were identified by XRD. Fe-oxidation states of bulk soils showed 20-40% of Fe(II) which would be ascribed to the reduction of Fe in clays as well as Fe-bearing minerals. Moreover, redox states of Fe in smectite structure was a ~57% of Fe(III) consistent to the values for the bulk soils. The cation exchange capacity of bulk soils ranged from 100 to 300 meq/kg and differences were not significantly measured for the sampling locations. Total cations (Mg, K, Na, Al, Fe) of bulk soils varies, contrast to the heavy metals (Co, Ni, Cu, Zn, Mn). These results suggested that composition of bed rocks influenced the distribution of elements in soil environments and soils containing clay compositions may went through the bio/geochemical alteration.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.335-348
• /
• 2016

The fluvial Tamna Formation, consisting of conglomerate, sandstone and mudstone layers, is widely distributed in Jeiu Island. Various sizes of quartz crystals were identified from most of the Tamna Formation, including the mudstone layer. XRD analysis also shows that the mudstone layer is composed of various minerals, quartz, plagioclase, K-feldspar, mica, magnetite, hematite, olivine, amphibole, gibbsite, calcite, analcime and clay minerals such as illite, kaolinite, vermiculite, smectite, chlorite, $10{\AA}$-halloysite. There is a tendency showing that the more amount of kaolinite, vermiculite, and chlorite is present where the more amount of quartz crystals is present. It is likely that the main source materials contributing to the Tamna Formation were from the parental rocks containing abundant quartz grains, suggesting that the Tamna Formation could not be related to Jeju volcanic rocks, but possibly to pre-existing basement rocks. Thus, we propose that the Tamna Formation was formed from the materials derived from both pre-existing basement rocks and Jeju volcanic rocks, which were subsequently affected by diagenesis, hydrothermal alteration and weathering process.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.355-361
• /
• 2006

Artificially crushed sands occupy approximately 30 percent of the total consumption in South Korea. The demand for the crushed sands is expected to rise in the future. Most manufacturers use granitic rocks to produce the crushed sands. During the manufacturing process, fine fractions (i.e., sludges or particles smaller than 63 microns) are removed through the process of flocculation. The fine fraction occupies about 15% of the total weight. The sludges are comprised of quartz, feldspars, calcite, and various kinds of clay minerals. Non-clay minerals occupy more than 75 percent of the sluges weight, according to the XRD semi-quantification measurement. Micas, kaolinites, chlorite, vermiculite, and smectites occur as minor constituents. The sludges from Jurassic granites contain more kaolinites and $14{\AA}$-types than those from the Cretaceous ones. The chemical analysis clearly shows the difference between the parent rocks and the sludges in chemical compositions. Much of colored components in the sludges was accumulated as the weathering products. Particle size analysis results show that the sludges can be categorized as silt loam in a sand-silt-clay triangular diagram. This result was for her confirmed by the hydraulic conductivity data. In South Korea, the sludges remained after crushed sand production are classified as an industrial waste because of their impermeability, and which is caused by their high silt and clay fractions.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.1
• /
• pp.11-19
• /
• 2017

Reddish brown clay-silt sediments covered granitoid weathering crust in the Jangdongri area, Naju, Korea. Mineralogical and geochemical properties of the ~2 m sediment section were investigated. The sediments were composed mainly of quartz (50%) and clay minerals (45%) with minor contents of K-feldspar, goethite, hematite, and gibbsite. The clay minerals were illite, illite-smectite mixed-layers, vermiculite, hydroxy-Al vermiculite, kaolinite, and halloysite. Mineral composition varied little through the section with the minor upward enrichment of plagioclase and chlorite. Abundant illitic clay minerals indicated the remote source of the sediments because clays derived by granite weathering in Korea were dominated by kaolin minerals. A comparison with the mineral composition of Asian dust (Hwangsa) suggested that plagioclase and K-feldspar disappeared by chemical weathering after deposition, resulting in the quartz and clay-rich sediments. Plagioclase and chlorite altered to kaolin and vermiculite, respectively. Goethite and hematite derived by the weathering of iron-bearing minerals stained the sediment to reddish brown color. The mineralogical and geochemical properties of the reddish brown clay-silt sediments were consistent with those of eolian deposits identified in Korea, supporting eolian origin of the Jangdongri sediments, requiring future confirmation including age dating and isotopic analysis.

• Economic and Environmental Geology
• /
• v.32 no.6
• /
• pp.611-631
• /
• 1999

Enviromental geochemisty and heary metal contamination at the Kongjueil mine creek were underaken on the basis of physicohemical properties and mineralogy for various kinds of water (surface, mine and ground water),soil, precipitate and sediment collected of April and December in 1998. Hydrgeochemical composition of the water samples are characterized by relatively significant enricant of Ca+Na, alkiali ions $NO_3$ and Cl inground and surfore water, wheras the mine waters are relatively eneripheral water of the mining creek have the characteristics of the (Ca+Mg)-$(HCO_3+SO_4)$type. The pH of the mine water is high acidity (3.24)and high EC (613$\mu$S/cm)compared with those of surface and ground water. The range of $\delta$D and $\delta^{18}O$ values (relative to SMOW) in the waters are shpwn in -50.2 to -61.6% and -7.0 to -8.6$\textperthousand$(d value=5.8 to 8.7). Using computer program, saturation index of albite, calcite, dolomite in mine water are nearly saturated. The gibbiste, kaolinite and smectite are superaturated in the surface and ground water, respectively. Calculated water-mineral reaction and stabilities suggest that weathing of silicate minerals may be stable kaolinite owing to the continuous water-rock reaction. Geochemical modeling showed that mostly toxic heavy metals may exist larfely in the from of metal-sulfate $(MSO_4\;^2)$and free metal $(M^{2+})$ in nmine water. These metals in the ground and surface water could be formed of $CO_3$ and OH complex ions. The average enrichment indices of water samples are 2.72 of the groundwater, 2.26 of the surface water and 14.15 of the acid mine water, normalizing by surface water composition at the non-mining creek, repectively. Characteristics of some major, minor and rate earth elements (Al/Na, K/Na, V/Ni, Cr/V, Ni/Co, La/Ce, Th/Yb, $La_N/Yb_N$, Co/Th, La/Sc and Sc/Th) in soil and sediment are revealed a narrow range and homogeneous compositions may be explained by acidic to intermediate igneous rocks. And these suggested that sediment source of host granitic gneiss colud be due to rocks of high grade metamorphism originated by sedimentary rocks. Maximum concentrations of environmentally toxic elements in sediment and soil are Fe=53.80 wt.% As=660, Cd=4, Cr=175, Cu=158, Mn=1010, Pb=2933, Sb=4 and Zn=3740 ppm, and extremely high concentrations are found are found in the subsurface soil near the ore dump and precipitates. Normalizing by composition of host granitic gneiss, the average enerichment indices are 3.72 of the sediments, 3.48 of the soils, 10.40 of the precipitates of acid mine drainage and 6.25 of the soils near the main adit. The level of enerichment was very severe in mining drainage sediments, while it was not so great in the soils. mineral composition of soil and sediment near the mining area were partly variable being composed of quartz, mica, feldspar, chlorite, vermiculite, bethierin and clay minerals. reddish variable being composed of quartz, mica, feldspar, chlorite, vermiculite, bethierin and clay minerals. Reddish brown precipitation mineral in the acid mine drainage identifies by schwertmanite. From the separated mineralgy, soil and sediment are composed of some pyrite, arsenopyite, chalcopyrite, sphalerite, galena, malachite, goethite and various kinds of hydroxied minerals.

• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.543-551
• /
• 1997

Poongjeon talc deposits is emplaced in dolomite and dolomitic limestone of the Cambro-Ordovician Samtaesan Formation. Ore in Poongjeon is low grade talc and the deposit has been known as the contact metasomatic or hydrothermal replacement type related to the intrusion of late Cretaceous granite in this area. X-ray diffraction, electron microprobe analysis, fluid inclusion and stable isotope analysis were utilized to examine the mineralogy of the ore and the origin of the ore fluid. The ore from Poongjeon mine mainly consists of talc and tremolite with minor amount of illite, vermiculite, smectite, and chlorite-vermiculite mixed layer. Occurrence of ore body indicates that the talc-tremolite ore was formed through the replacement by the $SiO_2$-rich hydrothermal fluid along the bedding and dike boundaries, or contact of amphibolite and basic dike with carbonate rocks. The temperature and pressure of the ore forming fluids at the time of the talc mineralization were estimated as $350^{\circ}C$ and 400 bar, respectively, based on the heating and freezing data of the fluid inclusions in quartz from talc-tremolite veins. During the talc-tremolite formation, fluids were divided into $CO_2$-enriched fluid and $CO_2$-poor fluid from $CO_2$ immiscibility (or effervescence). Oxygen isotope values (${\delta}^{18}O$) of the talc-tremolite fall within a range between 12.2 and 12.9‰. Hydrogen isotope values(${\delta}D$) of the ore range from -60 to -85‰ and $H_2O$ contents range from 2.0 to 3.4 wt.%. ${\delta}^{18}O$ and ${\delta}D$ values of talc ore indicate that the hydrothermal fluid involved in talc-tremolite formation was of igneous origin. Oxygen and hydrogen isotopic exchange between talc ore and the surface water was negligible after talc-tremolite ore formation.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.2
• /
• pp.151-159
• /
• 2003

$^{31}$ /P NMR and XRD have been used to study the mineralogical compositions and the phosphorus species in marine sediments near Wolsung nuclear power plant. The core samples with 30cm depth were investigated and no mineralogical changes have been found. The studied marine sediments were composed of quartz, albite, microcline, calcite, and some clay minerals such as illite, smectite, chlorite, and kaolinite. Only orthophosphate-monoester and very small amount of ortho-phosphate-diester were identified as phosphorus species in the studied sample, different from the species reported in other countries. These phosphorus species are mainly from organisms and was exposed to the oxic conditions. The consistent mineralogical compositions as well as the same phosphorus species throughout the entire core samples indicate that the constant oxic condition was kept without any changes in sedimentary conditions or the sediments were deposited with different sedimentary conditions, but later they were disturbed by other activities and exposed to the surface oxic conditions continuously.