• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.37-40
• /
• 2001

This study was carried out to investigate the optimum condition for silk sericin collection from degumming solution using some aluminium salts with various treatment conditions and examine the thermal properties of silk sericin collected from degumming solution. Silk sericin was precipitated by treatment of aluminium metal compound from degumming solution. The best optimum collecting conditions of silk sericin from degumming solution are the concentration of 2 $m\ell$/l of polyaluminium chloride (PAC), pH range of 5~7 and room temperature. The reduction of water pollution was evaluated by decreasing the chemical oxygen demand (COD) and nitrate ion (NO$_3$￣). Thermal stability of silk sericin collected from degumming solution was a little lower than that of hot water.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.45-52
• /
• 2006

Five low molar ratio urea-formaldehyde (LUF) resins were synthesized in this study. The effects of molar ratio, free formaldehyde content, and catalysts on the curing characteristics of LUF resins were studied by measuring its free formaldehyde content, pH value change after catalysts added, curing rate, and pot life, observing its cured appearance, and analyzing its thermal behavior. The results indicate that: 1) The LUF resin with lower molar ratio than 1.0 can still cure; 2) Free formaldehyde content is not the main factor in affecting curing rate of LUF resin; 3) Compared with ammonium chloride as a traditional catalyst, persulfate salts markedly accelerate the curing rate of LUF resin, and result in the different appearance; 4) the addition of sodium chloride to catalysts can accelerate the curing rate of LUF resin, but the effect is moderate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.129-134
• /
• 1999

Recent construction activities and maintenance of marine facilities have been accelerating to keep up with rapid economic growth in Korea. Marine concrete structures are to salts and chloride from ocean environments. The corrosion of reinforcement steel caused by chloride-penetration into concrete may severely affect the durability of concrete structures. the objective of this research is to develop a durable concrete by investigating the resistance of various corrosion protection systems utilizing different water/cement ratio, silica fumes, corrosion inhibitors, etc. A two-year verification test on various corrosion protection system has been doing in the laboratory. Corrosion investigations on reinforcement steel are now under progress for more than 63 concrete specimen. Corrosion-related measurements include microcell corrosion current.

• Corrosion Science and Technology
• /
• 제15권1호
• /
• pp.28-37
• /
• 2016

Due to the increased construction of offshore concrete structures and the use of de-icing salts for the purpose of snow removal, the needs for the development of anti-corrosive concrete are increasing. To solve these problems, an evaluation of the mechanical and durability properties for concrete were conducted by mixing modified-sulfur as 0 %, 5 %, 10 %, 15 % cement weight ratio. Both strengths and the properties affecting durability such as water absorption coefficient, chloride ion permeability, accelerated carbonation resistance, rapid freezing and thawing, and chemical resistance were evaluated. All evaluations performed were according to the test specifications associated KS. The results indicate that mixing of modified-sulfur lowed chloride ion permeability and improved chemical resistance.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.478-481
• /
• 1996

Disproportionation reaction is very important and interesting reaction to be applied to such surface treatment as metal, alloy, compound coating, a surface etching and so on. In gaseous system, the reaction of Al chloride is applied to Al and Al alloy coating, and the similar reaction of Ti chloride is also used for Ti, Ti alloy and Ti compound coating. As for aqueous system, this reaction is utilized to such metal coat as Sn etc. and metal etching such as Cu, Fe and so on. Also in molten salts system, this reaction has many application for surface treatment like metal, alloy and compound coatings for corrosion, wear, heat resistance and so forth. For instance, carbide film, nitride film, boride film, alloy film, quite new different film from the components of substrate material are coated in single and multiple component film system by the disproportionation reaction.

• Membrane and Water Treatment
• /
• 제12권2호
• /
• pp.59-64
• /
• 2021

The rejection of sodium chloride (NaCl) and calcium chloride (CaCl2) single salt solutions were carried out for commercial nanofiltration NFDK membrane. Results showed that the NFDK membrane had a negative surface charge and had a higher observed rejection of 93.65% for calcium (Ca2+) ion and 78.27% for sodium (Na+) ions. Prediction of rejection for aqueous solutions of both salts was made using Donnan Steric Pore Model based on Extended Nernst-Planck Equation in addition to concentration polarization film theory. A MATLAB program was developed to execute the model calculations. Absolute Average Relative Error (% AARE) was found below 5% for real rejection of the NFDK membrane. This research could be used successfully to assess the membrane characterization parameter using a proposed procedure which can reduce the number of experiments.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.688-693
• /
• 2000

Recently great efforts and investment have been made in order to evaluate concrete durability by steel corrosion. But most of study is relatively or qualitatively estimated, therefore it has a great limitation in evaluating a remaining service life of concrete. In this research, steel corrosion rate was measured quantitatively by polarization resistance method and multi-regressed considering chloride, carbonation, coverage depth, relative humidity, W/C, and the use of deicing salts. And a half cell potential method was used at th same time for the purpose of comparing with polarization resistance method.

• 분석과학
• /
• 제10권4호
• /
• pp.231-239
• /
• 1997

역상 이온쌍 고성능 액체크로마토그래피에 의해 3차 아민들과 4차 암모늄염들을 분리하고 정량하였다. 시료들은 간접분광광도법에 의해 검출하였다. 검출 시약과 이온쌍 시약으로는 염화벤질 트리메틸암모늄(BTMACl)과 도데실황산나트륨(DDSANa)을 사용하였다. 전해커패시터의 전해액 중에 포함되어 있는 이들 아민과 암모늄염의 분리 및 정량은 메탄올-물(40:60) 용액에 DDSANa를 0.010M, BTMACl을 0.004M 되게 용해시키고 염화암모늄-암모니아 완충용액(0.05M)으로 pH를 8.5되게 만든 용리액으로 Supelco LC-18이나 ${\mu}$-Bondapak phenyl 컬럼을 통하여 용리시킴으로써 가능하였다. 전해 커패시터들의 전해액을 분석하여 얻은 분석 값의 4차 암모늄염을 첨가하여 만든 커패시터는 임피던스 0.08~0.13의 성능이 우수한 커패시터가 됨도 발견함으로써 분석이 잘 이루어 졌음을 확인하였다.

• 한국환경과학회지
• /
• 제14권8호
• /
• pp.723-737
• /
• 2005

The effects of pH (5, 7 and 9) and ionic strength of different salts on the flocculation characteristics of humic acid by inorganic (alum, polyaluminum chloride (PAC) with degree of neutralization, r=(OH/Al) of 1.7) and organic (cationic polyelectrolyte) coagulants, have been examined using a simple continuous optical technique, coupled with measurements of zeta potential. The results are compared mainly by the mechanisms of its destabilization and subsequent removal. The destabilization and subsequent removal of humic acid by PAC and cationic polyelectrolyte occur by a simple charge neutralization, regardless of pH of the solution. However, the mechanism of those by alum is greatly dependent on pH and coagulant dosage, i.e., both mechanisms of charge neutralization at lower dosages and sweep flocculation at higher dosages at pH 5, by sweep flocculation mechanism at pH 7, and little flocculation because of electrostatic repulsion between negatively charged humic acid and aluminum species at pH 9. The ionic strength also affects those greatly, mainly based on the charge of salts, and so is more evident for the salts of highly charged cationic species, such as $CaCl_2$ and $MgCI_2.$ However, it is found that the salts have no effect on those at the optimum dosage for alum acting by the mechanism of sweep flocculation at pH 7, regardless of their charge.

• 한국유기농업학회지
• /
• 제20권2호
• /
• pp.231-241
• /
• 2012

천일염의 농업적 활용은 관행농업에서 뿐만 아니라 친환경농산물 생산을 위해 농업인들 사이에서 증가하는 추세이다. 그러나 다량의 천일염을 지속적으로 살포할 경우 토양에 염류가 집적될 소지가 크고, 이로 인해 작물의 생육장해가 초래될 수 있다. 따라서 본 연구는 천일염을 토양에 살포하였을 때의 토양 이화학성과 마늘의 무기성분 함량과 수량에 미치는 영향을 조사하고자 수행하였다. 천일염을 살포하는 양이 증가할수록 토양의 전기전도도, 치환성 나트륨, 염소이온, 황산이온은 표토에서 높아졌다. 그러나, 수확기에는 천일염의 성분이 강우에 의해 심토로 용탈되어 작물이 생육하는 근권에서는 전기전도도, 치환성 나트륨, 염소이온, 황산이온은 감소하였고, 염소이온은 다른 성분보다 더욱 빠르게 심토로 용탈되었다. 토양의 나트륨 흡착비, 치환성 나트륨 백분율, 토양 분산율은 천일염이 투입량이 증가할수록 높아지는 경향이었다. 천일염을 토양에 살포하였을 때 마늘의 무기성분 중에 질소, 칼슘, 마그네슘, 미량원소인 철, 망간, 아연 등의 함량은 줄어들었고, 바닷물에 많은 성분인 염소 성분의 흡수는 증가하였으나, 마늘의 수량에는 큰 영향을 미치지 못하였다.