• Clinical and Experimental Reproductive Medicine
• /
• 제17권1호
• /
• pp.87-91
• /
• 1990

Development of a solid-phase chemiluminescence immunoassay for the detection of progesterone in serum extract was described. The chemiluminescence immunoassay was establised utilizing anti-progesterone monoclonal antibody that coated on polystyrene tubes and progesterone-ABEI conjugate as tracer. The light yield generated from antibody bound conjugate was counted on clinilumat luminometer by oxidation with microperoxidase and peroxide. The chemiluminescence immunoassay was high specific and accurate and detects as little as 3.9ng/ml of progesterone. The intra-assay CV ranged from 6% to 11.5% and inter-assay CV ranged from 13.6% to 18.7%. This assay system was good correlated with conventional kit radioimmunoassay system (r=0.98).

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.1937-1940
• /
• 2005

A lab-made chemiluminescence system with air pump was developed for monitoring of some metal levels in rain. The air pump enabled injection of 17.7 $\mu$g samples into a glass cell filled with luminol-$H_2O_2$ reagent of typically 300 $\mu$L for chemiluminescence measurement. The monitored trend of total metal ions in the rain collected in our campus was compared with analytical results of each metal ion from GFAAS. The system was also demonstrated to determine $Cr^{6+}$ by reduction to $Cr^{3+}$ using $SnCl_2$. The limit of detection for $Cr^{6+}$ obtained by 4 measurements was 85.0 pg $mL^{-1}$ with a relative standard deviation of 3.4%. Although this system doesn’t have selectivity due to the characteristics of chemiluminescence, application of it to environmental monitoring as a sensor for some transition metal ions was demonstrated.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.69-76
• /
• 1994

Low density polyethylene is widely used as an insulating material In electric power cables. It is most important to know the beginning of its aging by partial discharge and UV-ray. That Is reason which we investigate chemiluminescence of the LDPE treated by partial discharge, UV-ray and corona discharge. We find that it takes one hour on spectra of IR but 0.17 minutes on chemiluminescence in the variation of chemical by partial discharge. Also we knew that Lithium carbonate-added(1phr) LDPE offered obvious suppressing effect on aging by partial discharge through the chemiluminescence. Therefore, the chemiluminescence is a highly sensitive and effective measurement method to appreciate characteristics of the treated surface and the oxidation reaction.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.109-112
• /
• 2003

A method to determine As(V) ions in aqueous solution by chemiluminescence method has been studied using a stopped flow system. The method is based on the increased chemiluminescence intensity with the addition of As(V) ion to a solution of lucigenin and hydrogen peroxide. The effects of KOH concentration, $H_2O_2$ concentration and flow rate of reagents on the chemiluminescence intensity have been investigated. The calibration curve for As(V) was linear over the range from $1.0{\times}l0^{-6}$M to $1.0{\times}l0^{-4}$M, the coefficient of correlation was 0.997 and the detection limit was $3.3{\times}l0^{-7}$M under the optimal experimental conditions.

• Bulletin of the Korean Chemical Society
• /
• 제22권7호
• /
• pp.727-731
• /
• 2001

Conjugated-non-conjugated alternating block copolymers containing distyrylarylene units were synthesized via Wittig reaction for chemiluminescent fluorophores. The polymers were differentiated from others by the presence of aromatic unit in the chromophoric block. When UV-VIS, photoluminescence and chemiluminescence spectra of these materials were compared with copolymers, a strong bathochromic effect was observed. A more pronounced red shift and higher chemiluminscence efficiency were observed in the polymer with anthracene ring. Sodium salicylate-catalyzed reaction of bis(2-carbopentyloxy-3,5,6-trichlorophenyl) oxalate with hydrogen peroxide produced a strong chemiluminescence from blue to yellow-green light emission with wavelength of 450-537 nm in the presence of the fluorophore. The chemiluminescent intensity decayed exponentially. The glow of chemiluminescence maintained more than l2 hr and was visible with the naked eye.

• Journal of Microbiology and Biotechnology
• /
• 제19권7호
• /
• pp.734-741
• /
• 2009

Recently, strains of methicillin-resistant Staphylococcus aureus (MRSA) with reduced susceptibility to vancomycin (VCM) have been clinically isolated. The antibacterial activity of a new drug, linezolid (LZD), in such a strain was evaluated by measuring bacterial metabolic activity. A total of 73 MRSA strains having various susceptibilities to VCM were subjected to a novel and highly sensitive chemiluminescence-based assay. LZD MIC in the tested strains, measured by the microbroth dilution method, was within the range 1-4 mg/l (mostly ${\leq}2$mg/l), except for one LZD-resistant strain (NRS127; MIC=7 mg/l), and showed no correlation with VCM resistance. The chemiluminescence assay demonstrated that bacterial metabolic activity was strongly suppressed with increasing LZD concentration. The chemiluminescence intensity curve had a low baseline activity without tailing in most strains. The present results suggest that LZD has strong antibacterial activity against MRSA strains, and would be effective for treatment of infections that are poorly responsive to VCM. The chemiluminescence assay facilitated sensitive and discriminative susceptibility testing within a relatively short time.

• 대한기계학회논문집B
• /
• 제31권6호
• /
• pp.539-546
• /
• 2007

An experimental study was performed to investigate the characteristics of chemiluminescence in a radiant burner, varying the excess air ratio from 0.91 to 1.67 at firing rate 80.5 to 134.2 kW/m2 on $OH^*,\;CH^*,\;{C_2}^*$ in LNG-Air premixed flames. The signals from electronically excited states of $OH^*,\;CH^*,\;{C_2}^*$ were detected using a Intensified Couple Charged Detector (ICCD) camera. The measurements of exhausted emission were made to investigate the correlation between chemiluminescence and emissions. The chemiluminescence intensity was increased with increase of firing rate like characteristics of $NO_x$ emission. $NO_x$ also increased with increase of firing rate and excess air ratio. It is found that offset of firing rate is more dominant excess air ratio $NO_x$ emission. The maximum chemiluminescence intensity occurs near the stoichiometric excess air ratio or lean conditions in case of high firing rate and the maximum intensity occurs rather than rich conditions in case of relatively low firing rate. Amount of $NO_x$ emission is maximum at near stoichiometric excess air ratio, which is chemiluminescence intensity is maximum.

• 센서학회지
• /
• 제15권5호
• /
• pp.317-322
• /
• 2006

A method to determine quinine in aqueous solution by chemiluminescence method using a stopped flow system has been studied. The method is based on the increased chemiluminescence intensity with the addition of quinine to a solution of lucigenin and hydrogen peroxide. The effects of KOH concentration, flow rate of reagents, $H_{2}O_{2}$ concentration used for the masking of quinine on the chemiluminescence intensity have been investigated. The calibration curve for quinine was linear over the range from $1.0{\times}10^{-7}$ M to $1.0{\times}10^{-3}$ M, coefficient of correlation was 0.993 and the detection limit was $3.0{\times}10^{-8}$ M under the optimal experimental conditions of 1.0 M, 1.5 M, 3.0 mL/min for the concentration of $H_{2}O_{2}$, KOH and flow rate of reagents, respectively.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.103-108
• /
• 2003

A method to determine chromium(III) ion in aqueous solution by chemiluminescence method using a lucigenin entrapped silica sol-gel film has been studied. An optical probe for chromium(III) ion has been prepared by entrapping lucigenin into silica sol-gel film coated on a glass support by dip coating. The chromium(III) optical sensor is based on the catalytic effect of chromium(IIII) ion on the reaction between lucigenin and hydrogen peroxide in basic solutions. The effects of Nafion, DMF and Triton X-100 were investigated to find the optimum condition to minimize cracking and leaching from the probe. The effects of pH and concentrations of lucigenin and hydrogen peroxide on the chemiluminescence intensity were investigated. The chemiluminescence intensity was increased linearly with increasing chromium(III) concentration from $2.5{\times}10^{-4}$M to $8.0{\times}10^{-7}$M and the detection limit was $4.0{\times}10^{-7}$M.

• 한국연소학회지
• /
• 제20권1호
• /
• pp.24-31
• /
• 2015

Flame structure, which contains a useful information for studying combustion instability of the flame, is often quantitatively visualized with PLIF (planar laser-induced fluorescence) and/or chemiluminescence images. The latter, a line-integral of a flame property, needs to be preprocessed before being inverted, mainly due to its inherent noise and the axisymmetry assumption of the inversion. A preprocessing scheme utilizing multi-division of ROI (region of interest) of the chemiluminescence image is proposed. Its feasibility has been tested with OH PLIF and $OH^*$ chemiluminescence images of SNG (synthetic natural gas) swirl-stabilized flames taken from a model gas turbine combustor. It turns out that the multi-division technique outperforms two conventional ones: those are, one without preprocessing and the other with uni-division preprocessing, reconstructing the SNG flame structure much better than its two counterparts, when compared with the corresponding OH PLIF images. It is also found that the Canny edge detection algorithm used for detecting edges in the multi-division method works better than the Sobel algorithm does.