• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.210-218
• /
• 2018

Ethylenediaminetetraacetic acid (EDTA)-functionalized KIT-6 and KCC-1 mesoporous silicas were prepared via post-synthesis grafting and examined for their ability to promote the recovery of rare earth metal ions such as $Nd^{3+}$ from an aqueous medium. The obtained adsorption isotherms were fitted to the Langmuir model, which gave a maximum adsorption of $Nd^{3+}$ ions of 109.8 and 96.5 mg/g for KIT-6-EDTA and KCC-1-EDTA, respectively, at $25^{\circ}C$ and pH 6. The adsorption kinetic profile of KIT-6 was faster than KCC-1. KIT-6 was also proved to be more stable against desorption under acidic regeneration conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.37-38
• /
• 2013

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2005년도 춘계 학술발표회 논문집
• /
• pp.3-6
• /
• 2005

• 한국가스학회지
• /
• 제5권4호
• /
• pp.79-84
• /
• 2001

본 연구에서는 폴리올의 구조(OH-value, functionality)와 각각의 발포제(CFC-11, HCFC-l4lb, HFC-365mfc)가 우레탄의 반응성, 폼의 물성 그리고 cell 구조에 미치는 영향을 평가하여 HFC-365mfc의 대체 가능성을 고찰하였다. 그 결과 폴리올의 OH-value와 작용기가 증가함에 따라 반응온도, 반응속도, 밀도 그리고 압축강도는 증가하였다. Cell의 크기는 폴리올의 OH-value와 작용기가 커질수록 미세하게 형성되었다. CFC-11 HCFC-l4lb 그리고 HFC-36smfc에 따른 반응온도, 반응속도, 밀도 그리고 압축강도의 변화는 거의 없었으며, cell 분포는 HFC-365mfc를 사용한 경우가 HCFC-l4lb를 사용한 경우에 비해 균일한 cell 분포를 나타내었다.

• 한국식품과학회지
• /
• 제29권6호
• /
• pp.1131-1137
• /
• 1997

팽창제 종류에 따른 시간별 가스 발생 속도 및 쿠키 텍스쳐에 대하여 살펴보았다. 본 실험에 사용된 가스 발생 장치에 의해서도 가스 발생 속도에 따라 크게 3타입으로 구분할 수 있었으며 이는 소암모늄명반을 제외하고는 문헌의 결과와 일치하였다. 속효성 평창제로는 주석산, 주석영, 후말산, 소암모늄명반이었고 이단 반응성 팽창제로는 산성피로인산나트륨, 무수모노인산칼슘, 소명반이었으며, 지효성 팽창제로는 중탄산암모늄, 중탄산나트륨, 글루코노-델타-락톤, 염화암모늄 등이었다. 제품 팽창률이 가장 높았던 것은 중탄산암모늄이었고 후미 면에서 가장 깨끗한 것은 글루코노-델타-락톤이었다. 팽창률이 높을수록 texture profile graph상에서 multi-peak를 나타내어 brittleness가 뛰어났으며 단순회귀분석에 의해, 팽창률과 brittleness간에 상관관계가 있음을 입증하였다$(r^2=0.8176)$. 중탄산암모늄을 사용한 쿠키 제품의 brittleness가 가장 높았다.

• Restorative Dentistry and Endodontics
• /
• 제42권3호
• /
• pp.176-187
• /
• 2017

Objectives: This study aimed to evaluate the chemical and biological properties of fast-set white mineral trioxide aggregate (FS WMTA), which was WMTA combined with calcium chloride dihydrate ($CaCl_2{\cdot}2H_2O$), compared to that of WMTA. Materials and Methods: Surface morphology, elemental, and phase analysis were examined using scanning electron microscope (SEM), energy dispersive X-ray microanalysis (EDX), and X-ray diffraction (XRD), respectively. The cytotoxicity and cell attachment properties were evaluated on human periodontal ligament fibroblasts (HPLFs) using methyl-thiazoldiphenyltetrazolium (MTT) assay and under SEM after 24 and 72 hours, respectively. Results: Results showed that the addition of $CaCl_2{\cdot}2H_2O$ to WMTA affected the surface morphology and chemical composition. Although FS WMTA exhibited a non-cytotoxic profile, the cell viability values of this combination were lesser than WMTA, and the difference was significant in 7 out of 10 concentrations at the 2 time intervals (p < 0.05). HPLFs adhered over the surface of WMTA and at the interface, after 24 hours of incubation. After 72 hours, there were increased numbers of HPLFs with prominent cytoplasmic processes. Similar findings were observed with FS WMTA, but the cells were not as confluent as with WMTA. Conclusions: The addition of $CaCl_2{\cdot}2H_2O$ to WMTA affected its chemical properties. The favorable biological profile of FS WMTA towards HPLFs may have a potential impact on its clinical application for repair of perforation defects.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.487-492
• /
• 2004

Building materials are composed of very complex chemical compounds, and these indoor building materials discharge very much Volatile Organic Compounds(VOCs). We performed the environmental chamber test to investigate the Total VOCs(TVOCs) emission characteristics and emission factors about chemical and natural coating materials. As the result, we concluded that TVOCs emission are high at initial time and decreased in course of time. Natural paint was low emission level for TVOCs than chemical paint by small chamber test. The TVOCs emission factor-time profile showed a good fit with the results from the measured and predicted value.

• 연구논문집
• /
• 통권29호
• /
• pp.151-162
• /
• 1999

In general, manufacturing processes of thermosetting composites consist of mold filling and resin cure. The important parameters used in modeling and designing mold filling are the permeability of the fibrous preform and the viscosity of the resin. To consolidate a composite, resin cure or chemical reaction plays an essential role. Cure kinetics. Therefore, is necessary to quantify the extent of chemical reaction or degree of cure. It is also important to predict resin viscosity which can change due to chemical reaction during mold filling. There exists a heat transfer between the mold and the composite during mold filling and resin cure. Cure kinetics is also used to predict a temperature profile inside composite. In this study, a new scheme which can determine cure kinetics from dynamic temperature scaning was proposed. The method was applied to epoxy resin system and was verified by comparing measurements and predictions.

• Journal of Photoscience
• /
• 제8권1호
• /
• pp.9-12
• /
• 2001

The photoisomerization behavior of benzylideneacetophenones, known as chalcones, was studied. We synthesized the chalcone derivatives that have ether groups at 4 and 4＇ positions. Due to the electron donating ability of the ether oxygen, the bond order of the single bond between two phenyl ring of the chalcone strengthened, which eventually increased the rotational barrier of the single bond. The rotational barrier of the single bond is about 20-22 kcal/mole. Thermal recovery of this process took about 1 min. The UV-visible spectra of these chromophores exhibit two characteristic absorption peaks at 276 nm and 340 nm. The relative intensity of the peaks varies depending on the alkyl chain length of the substituent. Photo-irradiation with the 365 nm light monotonously decreases the 340 nm peak. However, the photo-irradiation with 254 nm light induce two competing processes and produced rather complicated absorption profile.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권1호
• /
• pp.65-70
• /
• 2000

An approximated analytical solution of mathematical model for the three phase fluidized bed bioreactor (TFBBR) was proposed using the linearization technique to describe oxygen utilization rate in wastewater treatment. The validation of the model was done in comparison with the experimental results. Satisfactory agreement was obtained in the comparison of approximated analytical solution and numerical solution in the oxygen concentration profile of a TFBBR. The approximated solutions for three modes of the liquid phase flow were compared. The proposed model was able to predict the biomass concentration, dissolved oxygen concentration the height of efficient column, and the removal efficiency.