• The Korean Journal of Food And Nutrition
• /
• v.10 no.3
• /
• pp.407-413
• /
• 1997

The antimutagenic mechanism of cinnamaldeyde on mutagenesis induced by 4-nitroquinoline-1-oxide(4-NQO) and N-metyl-N'-nitro-N-nitrosoguanidine (MNNG) was investigated in various DNA repair-deficient strains, E. coli B/r and K-12 series. Cinnamaldehyde did not show any effects not only on the $\beta$-galactosidase activities of GW1060 and GW1103(recA441) which synthesizes $\beta$-galactosidase consitutively at 41$^{\circ}C$ but also on that of GW1107[lexA51 (Def)] in which the SOS response always occur. These results suggest that cinnamaldehyde dose not change the function of RecA which positively controls the SOS response as well as not acting as the repressor like LexA. In addition, no inhibitory effect of cinnamaldehyde was observed on the growth of Trp+ revertant and the delay of viable cell growth was also not found by adding cinnamaldehyde. Despite the decrease in the number of revertants, a significant increase in survival of 4-NQO treated cells was observed in E. coli WP2s(uvrA), ZA159($\Delta$uvrB) and TK603(uvrA). But these effects disappeared in excision-proficient strain WP2(uvrA+) and lexA-deficient strains(CM561 and CM611). The enhancement of survival was not found in WP67(uvrA polA) deficient in polymerase I which ligates the gap between complementary DNA. From the above results, we assume that cinnamaldehyde might show antimutagenic effect by enhancing an error-free recombinational repair system.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.152-158
• /
• 2016

Nitrogen oxide is generated by the chemical reaction of oxygen and nitrogen in higher temperature environment of combustion facilities. The NOx reduction equipment is generally used in the power plant or incineration plant and it causes enormous cost for the construction and maintenance. The flue gas recirculation method is commonly adopted for the reduction of NOx formation in the combustion facilities. In the present study, the computational fluid dynamic analysis was accomplished to elucidated the cold flow characteristics in the flue gas recirculation burner with coanda nozzles in the flue gas recirculation pipe. The inlet and outlet of flue gas recirculation pipes are directed toward the tangential direction of circular burner not toward the center of burner. The swirling flow is formed in the burner and it causes the reverse flow in the burner. The ratio of flue gas recirculation flow rate with the air flow rate was about 2.5 for the case with the coanda nozzle gap, 0.5mm and it was 1.5 for the case with the gap, 1.0mm. With the same coanda nozzle gap, the flue gas recirculation flow rate ratio had a little increase when the air flow rate changes from 1.1 to 2.2 times of ideal air flow rate.

• Journal of Technologic Dentistry
• /
• v.32 no.3
• /
• pp.195-207
• /
• 2010

Purpose: The purpose of this study was to observe the microstructural changes of surface in the specimens, performing the shear bond strength testing. The currently most used non-precious alloys are nickel-chromium based alloys with or without beryllium. However, their biocompatibility has been questioned concerning possible damages to the health of the patient and professionals involved in the fabrication of prosthesis caused by long exposure to Ni and Be. An option to nickel-chromium alloys is the cobalt-chromium alloy, an alternative that does not sacrifice the physical properties of the metal porcelain systems. Studies in the animals substantially show that the cobalt-chromium alloys are relatively well tolerated, being therefore more biocompatible than the nickel-chromium alloys. Methods: Non-addition Be to nickel-chromium based alloy(Bellabond plus) and cobalt-chromium alloy which has been widely used(Wirobond C) fused with ZEO light porcelain classified control group and cobalt-chromium alloy which is developing alloy of Alphadent company in Korea(Alphadent alloy) fused with ZEO light porcelain classified experimental group. The specimens of $4mm{\times}4mm{\times}0.5mm$ were prepared as-cast and as-opaque to cast body to analyze the mechanical characteristic change, the microstructure of alloy surface. The phase change was used to observe through XRD analysis and OM/SEM was used to observe the surface of specimens as-cast and as-opaque to cast body. Chemical formation of their elements was measured with EDS. Then hardness was measured with Micro Vicker's hardness tester. Shear bond strength test thirty specimens of $10mm{\times}10mm{\times}2mm$ was prepared, veneered, 3mm high and 3mm in diameter, over the alloy specimens. The shear bond strength test was performed in a universal testing machine(UTM) with a cross head speed of 0.5mm/min. Ultimate shear bond strength data were analyzed with one-way ANOVA and the Scheffe's test (P<0.05). Within the limits of this study, the following conclusions were drawn: The X-ray diffraction analysis results for the as-cast and as-opaque specimens showed that the major relative intensity of Bellabond plus alloy were changed smaller than Wirobond C and Alphadent Co-Cr based alloys. Results: Microstructural analysis results for the opaque specimens showed all the alloys increased carbides and precipitation(PPT). Alphadent Co-Cr based alloy showed the carbides of lamellar type. The Vickers hardness results for the opaque specimens showed Wirobond C and Alphadent Co-Cr based alloys were increaser than before ascast, but Bellabond plus alloy relatively decreased. The mean shear bond strengths (MPa) were: 33.11 for Wirobond C/ZEO light; 25.00 for Alphadent Co-Cr alloy/ZEO light; 18.02 for Bellabond plus/ZEO light. Conclusion: The mean shear bond strengths for Co-Cr and Ni-Cr based alloy were significantly different. But the all groups showed metal-metal oxide modes in shear bond strengths test at the interface.

• Journal of Radiation Protection and Research
• /
• v.20 no.4
• /
• pp.265-274
• /
• 1995

Diffusivity of ions of radioactive species is an important factor for designing radwaste repositories. Clay minerals are used as a backfill material. In this study, diffusion of Co-60 ions through the bentonite having various densities has been studied, using a diffusion cell. The measured diffusivities of Co-60 ions decreased as the density of bentonite increased. The diffusivity of Co-60 ion decreased from $8.79{\times}10^{11}m^2/s$ to $6.82{\times}10-13m^2/s$ as the clay dry bulk density increased from 0.41 to 2.03g/cm3. The diffusivity of Co ion was larger than that of Sr ion at low density, but the diffusivity of Co ion decreased rapidly as the density of clay increased and became smaller than that of Cs ion at high density. This phenomenon is thought to be caused by the rapid decrease of the fraction of mobile cation since the chemical combination of Co ions with oxygen or oxide on clay surface and the entrance of Co ions into the crystal structure of clay increase as the clay density increases. This change should be considered especially in designing the clay back fill for low and intermediate radwaste disposal facilities.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.6
• /
• pp.816-824
• /
• 2006

This study was conducted to evaluate the shoot height at which the yield and nutritive value of wormwood (Artemisia montana) is optimized in order to provide information on its potential to support animal production (Experiment 1). A second objective was to determine how the essential oil (EO) concentration in wormwood hay and silage differ (Experiment 2). In Experiment 1, Artemisia montana was harvested at five different shoot heights (20, 40, 60, 80 and 100 cm) from triplicate $1.8{\times}1.8m$ plots. Dry matter (DM) yield was measured at each harvest date and the harvested wormwood was botanically separated into leaf, stalk and whole plant fractions and analyzed for chemical composition and in vitro dry matter digestibility (DMD). Values for total digestible nutrients (TDN), digestible energy (DE) and metabolizable energy (ME) were subsequently calculated using prediction equations. Dry matter yields of stalk and whole plant increased linearly (p<0.001) and leaf yield increased quadratically (p<0.01) with shoot height, whereas the leaf/stalk ratio decreased linearly (p<0.001). As shoot height increased, there was a linear increase (p<0.001) in leaf DM, ether extract (EE) and neutral detergent fiber (NDF) contents and a quadratic increase (p<0.05) in leaf acid detergent fiber (ADF) and nitrogen free extract (NFE) contents, and stalk and whole plant DM (p<0.001), organic matter (OM, p<0.01 and p<0.05), NDF (p<0.001 and 0.05) and NFE (p<0.05) contents. However, there were decreases in leaf crude protein content (CP, quadratic, p<0.001) and stalk and whole plant EE content (linear, p<0.001), CP (quadratic, p<0.05) and ash (quadratic, p<0.05) contents. Digestibility of DM and TDN, and DE and ME value in leaves were not affected by increasing shoot height, but these measures linearly decreased (p<0.001) in stalk and whole plant. In Experiment 2, the hay had higher DM and CP concentrations, but lower EE concentration than the silage. Essential oil (EO) content in wormwood silage (0.49 g/100 g DM) was higher (p<0.05) than that in wormwood hay (0.32 g/100 g DM). Wormwood hay contained 25 essentail oils (EO) including camphor (10.4 g/100 g), 1-borneol (11.6 g/100 g) and caryophyllene oxide (27.7 g/100 g), and wormwood silage had 26 EO constituents including 3-cyclohexen-1-ol (8.1 g/100 g), trans-caryophyllene (8.6 g/100 g) and ${\gamma}$-selinene (16.8 g/100 g). It is concluded that the most ideal shoot height for harvesting wormwood is 60 cm based on the optimization of DM yield and nutritive value. Wormwood silage had a greater quantity and array of EO than wormwood hay.

• Journal of Surface Science and Engineering
• /
• v.42 no.1
• /
• pp.8-12
• /
• 2009

Electronic structures and chemical bonding of Li-intercalated $LiTiS_2$ and $LiTiO_2$ were investigated by using discrete variational $X{\alpha}$ method as a first-principles molecular-orbital method. ${\alpha}-NaFeO_2$ structure is the equilibrium structure for $LiCoO_2$, which is widely used as a commercial cathode material for lithium secondary battery. The study especially focused on the charge state of Li ions and the magnitude of covalency around Li ions. The average voltage of lithium intercalation was calculated using pseudopotential method and the average intercalation voltage of $LiTiO_2$ was higher than that of $LiTiS_2$. It can be explained by the differences in Mulliken charge of lithium and the bond overlap population between the intercalated Li ions and anions in $LiTiO_2$ as well as $LiTiS_2$. The Mulliken charge, which means the ionicity of Li atom, was approximately 0.12 in $LiTiS_2$ and the bond overlap population (BOP) indicating the covalency between Ti and S was about 0.339. One the other hands, the Mulliken charge of lithium was about 0.79, which means that Li is fully ionized. The BOP, the covalency between Ti and O, was 0.181 in $LiTiO_2$. Because of high ionicity of Li and the weak covalency between Ti and the nearest anion, $LiTiO_2$ has a higher intercalation voltage than that of $LiTiS_2$.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.449-458
• /
• 2006

The discharge of fly ash that is produced by coal-fired electric power plants is rapidly increasing in Korea. The utilization of fly ash in the raw materials would contribute to the elimination of an environmental problem and to the development of new high-performance materials. So it is needed to study the binder obtained by chemically activation of pozzolanic materials by means of a substitute for the cement. Fly ash consists of a glass phase. As it is produced from high temperature, it is a chemically stable material. Fly ash mostly consists of $SiO_2\;and\;Al_2O_3$, and it assumes the form of an oxide in the inside of fly ash. Because this reaction has not broken out by itself, it is need to supply it with additional $OH^-$ through alkali activators. Alkali activators were used for supplying it with additional $OH^-$. This paper concentrated on the strength development according to the kind of chemical activators, the curing temperature, the heat curing time. Also, according to scanning electron microscopy and X-Ray diffraction, the main reaction product in the alkali activated fly ash mortar is Zeolite of $Na_6-(AlO_2)_6-(SiO_2)_{10}-12H_2O$ type.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.3
• /
• pp.184-190
• /
• 2011

$LiMn_2O_4$ with mesoporous hollow sphere shape was synthesized by precipitation method with silica template. The synthesized $LiMn_2O_4$ has nanosized first particle and mesoporous hollow sphere shape. Silica template was removed by chemical etching method using NaOH solution. When the concentration of NaOH solution was increased, first particle size of manganese oxide was decrease and confirmed mesoporous hollow shpere shape. X-ray diffraction(XRD) patterns revealed that the synthesized samples has spinel structure with Fd3m space group. In case the ratio of silica and maganese salt increased, the size of first particles was decreased. The tetragoanal $LiMn_2O_4$ with micron size was synthesized at ratio of silica and manganese salt over 1 : 9. The prepared samples were assembled as cathode materials of Li-ion battery with 2032 type coin cell and their electrochemical properties are examined by charge-discharge and cyclic performance. Electrochemical measurements show that the nano-size particles had lower capacity than micron-size particles. But, cyclic performance of nano-size particles had better than that of micron-size particles.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.2
• /
• pp.75-83
• /
• 2014

The present study estimated nitrogen budget of South Korea including nitrogen oxides (NOx) in 2011. Emission sources of NOx were calculated with the higher contributors, such as vehicles, businesses, power plants, based on the IPCC and EPA reports. Moreover, nitrogen budget was separated for city, agriculture livestock and forest. Input and output were chemical fertilizer, crop uptake, fixation, irrigation, compost, leaching, volatilization, imported food, denitrification, runoff, and so on. Annual nitrogen input were 1,692,650 ton/yr and output were 837,739 ton/yr which were increased from 2010 budget. In 2011, NOx emissions by vehicles, power plants, and businesses were 308,207 ton/yr, 601,437 ton/yr, and 469,946 ton/yr, respectively. Including nitrogen oxide, total nitrogen input and output in 2011 was calculated as 5,652,366 ton/yr and 1,425,371 ton/yr, respectively.

• Korean Journal of Poultry Science
• /
• v.43 no.3
• /
• pp.135-142
• /
• 2016

This study was conducted to compare the general composition and immunomodulatory activity of breast and thigh meats from four lines of Korean native chickens: Yeonsan Ogye, Hyunin Black, Hwangbong, and Hoengseong Yakdak. White Leghorn was used as a control. Fifteen male chickens (three chickens in each line) were grown under the same conditions and slaughtered at 13 weeks old. The four lines of Korean native chickens, regardless of the part, had higher contents of crude fat (p<0.05) than White Leghorn. The cholesterol contents were significantly higher in Hyunin Black and significantly lower in Hoengseong Yakdak than those of other chickens (p<0.05). The immunomodulatory effect, assessed by macrophage cell proliferation and nitric oxide production, was only observed in the breast meat of the four lines of Korean native chickens. The phagocytic activity of macrophage cells was significantly augmented by the breast meat of Hyunin Black and Hoengseong Yakdak. Furthermore, the mRNA expressions of pro-inflammatory cytokines, such as IL-4, IL-10 and $IFN-{\gamma}$, was significantly suppressed by Korean native chickens compared with White Leghorn. These results suggested that the four lines of Korean native chickens exhibited greater immune-enhancing activity than White Leghorn.