• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2223-2227
• /
• 2010

Reaction of [(bpy)Pd]$(PF_6)_2$ (bpy = 2,2'-bipyridine) with racemic bis(isonicotinoyl)-1,1'-bi-2-naphtholate (L) in acetone, and followed by addition of chloroform and solvent evaporation allows to form amorphous micro-bowl morphology consisting of $[(bpy)PdL]_2(PF_6)_4$ without any template or additive. In contrast, the reaction and recrystallization in acetone for 1 week produce parallel-piped single crystals consisting of $[(bpy)_3Pd_3({\mu}_3-HPO_4)_2](PF_6)_2$. The formations of micro-bowl and parallel-piped single crystal morphologies appear to be primarily associated with the kinetic and thermodynamic control, respectively. The formation of micro-bowls may be attributed to eruption of organic solvents. Cosolvent effects and chemical properties on the formation of micro-bowl morphology have been observed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.232.2-232.2
• /
• 2014

Since its discovery in 2004, graphene, a sp2-hybridized 2-Dimension carbon material, has drawn enormous attention. A variety of approaches have been attempted, such as epitaxial growth from silicon carbide, chemical reduction of graphene oxide and CVD. Among these approaches, the CVD process takes great attention due to its guarantee of high quality and large scale with high yield on various transition metals. After synthesis of graphene on metal substrate, the subsequent transfer process is needed to transfer graphene onto various target substrates, such as bubbling transfer, renewable epoxy transfer and wet etching transfer. However, those transfer processes are hard to control and inevitably induce defects to graphene film. Especially for wet etching transfer, the metal substrate is totally etched away, which is horrendous resources wasting, time consuming, and unsuitable for industry production. Thus, our group develops one-step process to directly grow graphene on glass substrate in plasma enhanced chemical vapor deposition (PECVD). Copper foil is used as catalyst to enhance the growth of graphene, as well as a temperature shield to provide relatively low temperature to glass substrate. The effect of growth time is reported that longer growth time will provide lower sheet resistance and higher VSG flakes. The VSG with conductivity of $800{\Omega}/sq$ and thickness of 270 nm grown on glass substrate can be obtained under 12 min growing time. The morphology is clearly showed by SEM image and Raman spectra that VSG film is composed of base layer of amorphous carbon and vertically arranged graphene flakes.

• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.47-54
• /
• 2001

Prediction of the maximum packing volume fraction with non-spherical particles has been one of the important problems in powder technology. The sphericity of fly ash particles depending on the particle diameter was measured by means of a CCD image processing instrument. An algorithm to predict the maximum packing volume fraction with non-spherical particles is proposed. The maximum packing volume fraction is used to predict the slurry viscosity under well dispersed conditions. For this purpose, Simha's cell model is applied for concentrated slurry with wide particle size distribution. Also, Usui's model developed for aggregative slurries is applied to predict the non-Newtonian viscosity of dense fly ash - water slurry. It is certified that the maximum packing volume fraction for non-spherical particles can be successfully used to predict slurry viscosity. The pressure drop in a pipe flow is predicted by using the non-Newtonian viscosity of dense fly ash-water slurry obtained by the present model. The predicted relationship between pressure drop and flow rate results in a good agreement with the experimented data obtained for a test rig with 50 mm inner diameter tube. Base on the design procedure proposed in this study, a feasibility study of fly ash hydraulic transportation system from a coal-fired power station to a controlled deposit site is carried out to give a future prospect of inexpensive fly ash transportation technology.

• Corrosion Science and Technology
• /
• 제17권1호
• /
• pp.30-36
• /
• 2018

The high rate of corrosion of magnesium alloys makes it limited for industrial applications. Therefore, surface treatment is required to enhance their corrosion resistance. In our study, a chemical conversion coating for protecting the corrosion of the magnesium alloy, AZ31B, was prepared by using a phosphate-permanganate solution. The chemical conversion coating had a limited protection ability due to defects arising from cracks and pores in the coating layer. The sol-gel coating was prepared by using trimethoxymethylsilane (MTMS) and 3-glycidoxypropyltrimethoxysilane (GPTMS) as precursors, and aluminum acetyl acetonate as a ring opening agent. The corrosion protection properties of sol-gel and conversion coatings in 0.35wt% NaCl solution were measured by the electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization test. The EIS results indicated that the resistance of the chemical conversion coating with the sol-gel coating was significantly improved through the sol-gel sealed phosphate-permanganate conversion coating. The results of the potentiodynamic polarization test revealed that the sol-gel coating decreased the corrosion current density ($I_{corr}$). The SEM image showed that the sol-gel coating sealed conversion coating and improved corrosion protection.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.300-305
• /
• 2006

The chemical structure of a semi-aromatic polyimide-I, which was prepared by the chemical imidization of cyclopentanetetracarboxylic dianhydride and 2,2-bis(4-aminophenyl)hexafluoropropane, was characterized by $^{13}C-NMR$ spectroscopy. The chemically imidized polyimide-I was used for the preparation of a photosensitive polyimide (PSPI) through the addition of benzophenone and benzophenone oxime hexamethylene diurethane (BOHD), a photobase generator containing oxime-urethane groups. The polyimide-I film containing benzophenone and BOHD was not soluble in 2.38 wt% tetrabutylammonium hydroxide solution in $H_2O$. However, it became soluble following irradiation with 310 nm UV light. A positive tone image with a resolution of $5{\mu}m$ was obtained with this PSPI, having sensitivity($D_c$) of $1.2J/cm^2$ and contrast(${\gamma}_p$) of 1.08. Thus, a polyimide, which is not intrinsically photosensitive, can become photosensitive through the addition of a photobase generator containing oxime-urethane groups as a photosensitive compound.

• Elastomers and Composites
• /
• 제58권4호
• /
• pp.208-215
• /
• 2023

In this study, the properties of polyurethane-polydimethylsiloxane (PU-PDMS) hybrid foams containing different types and contents of physical blowing agents (PBAs) were investigated. Two types of blowing agents, namely physical blowing agents and thermally expandable microspheres (TEM), were applied. The apparent density was measured using precisely cut foam samples, and the pore size was measured using image software. In addition, the microstructure of the foam was confirmed via scanning electron microscopy and transmission electron microscopy. The thermal conductivities related to the microstructures of the different foams were compared. When 0.5 phr of the hydrocarbon-based PBA was added, the apparent density and pore size of the foam were minimal; however, the pore size was larger than that of neat foam. In contrast, the addition of 3 phr of TEM effectively reduced both the apparent density and pore size of the PBAs. The increase in resin viscosity owing to TEM could enhance bubble production stability, leading to the formation of more uniform and smaller pores. These results indicate that TEM is a highly efficient PBA that can be employed to decrease the weight and pore size of PU-PDMS hybrid foams.

• Science of Emotion and Sensibility
• /
• 제14권2호
• /
• pp.321-330
• /
• 2011

Images of smoky make up illustrations with different the brightness tones for typical Korean eyes (standard one, small single eyelid and tailed up style) were systematically analyzed using vision-based emotional descriptive language for students majoring makeup and professional group. We identified that various images could be expressed by changing smoky makeup tones on eyes types through analysis of the emotional descriptive language. The smoky make up image recognition of smoky make up illustrations was almost consistent between the students and the professional group, but there was the distinct difference of image perception by two groups for some smoky make up illustrations due to the generation gap as well as their make up expertise and techniques. We suggested the image positioning maps which expressed the emotional reaction felt according to eyes shapes and smoky make up tones. The positioning maps were to provide criteria for various images to be able to express by smoky make up.

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.286-292
• /
• 2020

This study presents an angular-based measurement on three-dimensional paper-based analytical devices (3D-PADs) for quantitative detection of albumin without using an image analyzer. We demonstrate a simple quantitative and straightforward approach based on the angle of the discolored area as detection criteria. 3D-PADs are rapidly fabricated by the wax-printing and laminating process. The 3D-PADs are treated with citrate buffer and tetrabromophenol blue to react with albumin in a sample solution. Dropping sample solution into sample pad in the 3D-PAD, fluid flows toward the assay zone laterally and vertically by capillary action. We find that the change of angle of the discolored area correctly reflects the concentration of albumin and is reliable determinant for the measurement of the albumin concentration. It is the first demonstration of angular-based detection as a simple, inexpensive, and equipment-free approach for point-of-care diagnosis.

• Applied Chemistry for Engineering
• /
• 제10권6호
• /
• pp.934-938
• /
• 1999

Effect of processing agents on physical properties on aniline-type leathers such as wet blue, crust leather, and finished leather has been investigated. These leathers were manufactured from pelts obtained by the chemical, the enzyme, and the bio-tech treatment. There was no difference in physical properties between crust leather and finished leather. All finished leathers with the three treatments were satisfied with the Korean Industrial Standard like a tensile strength of $1.2kg_f/mm^2$, an elongation of 30%, a tear strength of $3.0kg_f/mm$, a grain crack weight of $15kg_f$, and a $Cr_2O_3$ content of 2.5%. In peculiar, application of the bio-tech treatment gave the best leather. This improvement of physical quality could be explained by the results of SEM and image analyser.

• The KIPS Transactions:PartD
• /
• 제15D권4호
• /
• pp.581-588
• /
• 2008

Old films or photographs usually have damages from physical or chemical effects, and the damage and digitalization make stain, scratch, scribbling, noise, and digital drop out in frames. Damages include global damage and local damage, and it is well known that local damage restoration is a main factor for improving image quality. Previous researches have focused on impairment localization (esp. for line scratch impairments) and restoration techniques for line scratch, dirt, blob, and intentional scratch. Inpainting is a key technique using partial derivatives to restore damages in images. It does not show good quality for the complex images because it is based on finite order for partial derivatives, and it takes much time complexity. In this paper, we present a modified inpainting scheme, where we use Sobel edge operator's and angle to compute isophotes, and compare our scheme with Bertalmio's scheme. We experiment our scheme with two old Korean films, and Simulation results show that our scheme requires smaller time complexity than Bertalmio's scheme with comparable reconstructed image quality.