• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1096-1099
• /
• 2005

Multi-walled carbon nanotubes (CNTs) grown on catalyst dots by thermal chemical vapor deposition were vertically aligned with a high population density. Such densely populated CNTs showed poor field emission characteristics due to the electrical screening effect. We reduced the number density of CNTs using an adhesive tape treatment. For dotpatterned CNTs, the tape treatment decreased the CNT density by three orders of magnitude, drastically improved the turn-on electric field from 4.8 to $1.8V/{\mu}m$, and changed the emission image from spotty to uniform luminescence. We also report long-term emission stability of dot-patterned CNTs by measuring the emission currents with time at different duty ratios.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.939-942
• /
• 1997

In chemical mechanical polishing(CMP) there are many factors affecting the results. Temperature is one of the factors and it affects the removal rate. That is, the higher it arise, the more the material is removed. But the detailed temperature behavior is not discovered. In this study, we discover the distribution of temperature across the pad where the wafer has just been polished. And then we reveal the cause of the result in connection with the mechanical structure. In addition, we also discover the relationship of the friction force and normal force. With the result of two forces, we get the friction coefficient and obtain the contact model of the wafer and pad.

• Elastomers and Composites
• /
• v.50 no.1
• /
• pp.1-6
• /
• 2015

Polybutadiene rubber (BR) has been well known that its physical and chemical properties are changed when it is exposed to ultraviolet light undergoing photooxidation. In this study, photooxdiation process of BR vulcanizate was investigated using a high pressure mercury lamp used as an outdoor lighting, which has high UV radiation efficiency and reasonable cost. Discoloration and crack formation of photooxdized BR vulcanite surface were examined using an image analyzer. Change of chemical functional groups of BR vulcanite surface by photooxidation was investigated using ATR-FTIR, and variation of the crosslink density with the UV irradiation time was investigated. By increasing the UV irradiation time, the crosslink density steeply increased after a period of time and did not increase any more. Formation of hydroxyl (~OH) and carbonyl (~C=O) groups on the BR vulcanizate surface increased and the1,4-cis unit was converted to the 1,4-trans unit as the photooxidation was proceeded.

• Macromolecular Research
• /
• v.9 no.5
• /
• pp.247-252
• /
• 2001

Tricyclic aliphatic dianhydride monomer, tricycle[4.2.2.0]dec-9-ene exo, endo-3,4: 7,8-tetra-carboxylicdianhydride (TCDDA), was synthesized by photochemical reaction and poly(amic acid)s from TCDDA and diamines such as 1,4-bis-(4-aminophenoxy)benzene (BAB), 2,2-bis(4-(4-aminophenoxy) phenyl) propane (BAPP), 2,2-bis(4-(4-aminophenoxy)phenyl)hexafluoropropane (BAPHF), bis(4-(4-ami-nophenoxy) phenyl)sulfone (BAPS), and 1,4-bis-(4-aminophenoxy)biphenyl (BABP) were prepared. The inherent viscosities of the poly(amic acid)s were between 0.39 and 0.50 dL/g. The poly(amic acid)s were converted to polyimide films by thermal imidization. The glass transition temperatures (T$\_$g/) of the polyimides were in the range of 201-263$\^{C}$. The thermogravimetric analysis (TGA) thermogram of these polyimides showed the temperatures of 5% weight losses between 375 and 393$\^{C}$ in nitrogen atmosphere. To show their utility for image generation, degradations of these polyimides in UV exposure were investigated by UV spectroscopy.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.571-574
• /
• 2002

The photorefractive polymeric composite with good performance was prepared. The carbazole-substituted polysiloxane sensitized by 2,4,7-trinitro-9-fluorenone was used as a photoconducting medium and 1-[4-(2-nitrovinyl)phenyl]piperidine was added as an optically nonlinear chromophore. The photorefractive property of polymer was determined by diffraction efficiency using a 100 ㎛-thick film. The maximum diffraction efficiency ( ηmax) of 71% was obtained at the electric field of 70 V/ ㎛. The potential of the current polymer material as a holographic recording medium was evaluated by the demonstration of holographic recording and subsequent reading of optical image.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.329-334
• /
• 1992

Ultrasonic absorption was measured in bovine serum albumin (BSA) aqueous solution (50 g/l) in the frequency range from 100 kHz to 1600 MHz at neutral pH. Three experimental techniques were used to cover the wide frequency range : plano-concave resonator, conventional Bragg reflection, and high-resolution Bragg reflection methods. The absorption spectrum at neutral pH fitted the relaxation curve well using the distribution function of a mirror image of Davidson-Cole function. The relaxaition behavior was interpreted in terms of various degree of hydration of BSA molecules.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.998-1002
• /
• 2008

The gel electrolytes were prepared with sulfuric acid and phosphoric acid, where hydrophilic fumed silica was used as a gelling agent. The influences of gel electrolyte on performance of the valve regulated lead acid (VRLA) batteries were investigated employing capacity tests, electrochemical impedance spectroscopy and scanning electron microscopy. The initial capacities of the sulfuric gel VRLA batteries were higher than that of phosphoric gel VRLA batteries. The sulfuric gel VRLA battery using 1.210 specific gravity of sulfuric acid with hydrophilic fumed silica exhibited the highest capacity of 0.828Ah. In the impedance measurements, the ohmic and charge transfer resistances for the phosphoric gel VRLA batteries were higher thanthat of sulfuric gel batteries. The morphology of electrodes of phosphoric gel VRLA batteries were more deteriorated in the SEM image.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.590-590
• /
• 2013

Direct growth of graphene using CVD method has been done on CVD grown boron nitride substrate. From the SEM image, we have shown that the size of grain of graphene could be clearly controlled by varying the amount of injected hydrocarbon. To convince the existence of graphene on boron nitride, XPS and Raman has been checked. Both B1s and N1s peaks in XPS spectra and the Raman peak around 1,370 $cm^{-1}$ demonstrated that boron nitride did remain after high temperature treatment during the graphene growth process. And along the graphene grain boundary, the Raman fingerprint of graphene was neatly appeared.

• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.134-139
• /
• 1998

Amorphous fluorocarbon (a-C:F) is of interest for low dielectric interlayer material, but in this work we applied this material to FED field emitter. N-doped a-C:F films were deposited by inductively coupled plasma chemical vapor deposition (ICPCVD). The Raman spectra were measured to study the film structure and inter-band optical absorption coefficients were measured using Perkin-Elmer UV-VIS-IR spectrophotometer and optical band gap was obtained using Tauc's plot. XPS spectrum and AFM image were investigated to study bond structure and surface morphology. Current-electric field(I-E) characteristic of the film was measured for the characterization of electron emission properties. The optimum doping concentration was found to be [N2]/[CF4]=9% in the gas phase. The turn-on field and the emission current density at $[N_2]/[CF_4]$=9% were found to be 7.34V/$\mu\textrm{m}$ and 16 $\mu\textrm{A}/\textrm{cm}^2$ at 12.8V/$\mu\textrm{m}$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.966-970
• /
• 2005

To measure the thickness of liquid films from 10 to 60 ${\mu}m$, we used photochromic dye activation. And we used silicone oil with 10 centi-Stokes and commercial photochromic dyes. To make films with exact and known thicknesses, we used two glass wafers. A film formed between two wafers after placing a drop of liquid of known volume on one wafer and covering the other. The film thickness could be estimated from the diameter of wafer and the dropped liquid volume. To quantitatively evaluate the result, captured the images using digital camera then analyzed the images using the image tool. The gray scale intensity using the captured images of activated dye with these thicknesses showed the repeatability below ${\pm}$ 1.0% when measured with a silicone oil solution containing 0.1% SO and SO-ANTH dyes. And we showed that photochromic dye activation method could be used to measure our liquid film thickness ranges.