• 자원환경지질
• /
• 제37권1호
• /
• pp.143-151
• /
• 2004

광산 폐기물의 순환자원화 방안을 모색하기 위해 상동중석광산 광미를 대상으로 그의 물리적ㆍ화학적 특성, 광물학적 조성, 중금속 용출특성 및 분쇄특성, 그리고 그를 출발원료로 하여 포말법으로 제조한 세라믹 담체의 특성 등을 조사하였다. 광미의 화학적, 광물학적 특성은 심도별 큰 차이가 없고 광미의 중금속 용출량은 환경기준값 보다 낮아 광미 자체를 물질전환법에 의해 재활용하는데는 문제가 없다고 판단되었다. 그러나 광미의 median경(d$_{50}$ )은 10∼30$\mu\textrm{m}$ 이었다. 따라서 환경소재인 다공성 담체의 제조에 적합한 입도분포인 median경 3$\mu\textrm{m}$을 얻기 위해서는 슬러리 농도 40 vol% 기준일 때분산제인 PEI를 첨가하여 교반밀로 700 rpm으로 1시간이상 습식분쇄하여야만 가능함을 알 수 있었다. 그리고 광미 슬러리의 발포율을 3배로 하여 제조한 큐빅형 greenbody를 1,075$^{\circ}C$에서 90분 소결한 담체의 물성은 겉보기 밀도 0.52g/$cm^{3}$, 전체 기공율 80%, 열린 기공율72%, 기공의 크기분포가 30∼350$\mu\textrm{m}$이었다. 즉, 광산 폐기물인 광미를 출발원료로 하여 폐수처리용 환경소재로서 활용성이 매우 큰 매크로 기공을 가진 다공성 세라믹 담체를 제조 할 수 있었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.40-44
• /
• 2003

Soil-borne infectious disease including Pythium aphanidermatum and Rhizoctonia solani causes severe damage to plants, such as cucumber. This soil-borne infectious disease was not controlled effectively by chemical pesticide. Since these diseases spread through the soil, chemical agents are usually ineffective. Instead, biological control, including antagonistic microbe can be used as a preferred control method. An efficient method was developed to select an antagonistic strain to be used as a biological control agent strain. In this new method, surface tension reduction potential of an isolate was included in the ‘decision factor’ in addition to the other factors, such as growth rate, and pathogen inhibition rate. Considering these 3 decision factors by a statistical method, an isolate from soil was selected and was identified as Bacillus sp. GB16. In the pot test, this strain showed the best performance among the isolated strains. The lowest disease incidence rate and fastest seed growth was observed when Bacillus sp. GB16 was used. Therefore this strain was considered as plant growth promoting rhizobacteria (PGPR). The action of surface tension reducing component was deduced as the enhancement of wetting, spreading, and residing of antagonistic strain in the rhizosphere. This result showed that new selection method was significantly effective in selecting the best antagonistic strain for biological control of soil-borne infectious plant pathogen. The antifungal substances against P. aphanidermatum and R. solani were partially purified from the culture filtrates of Bacillus sp. GB16. In this study, lipopeptide possessing antifungal activity was isolated from Bacillus sp. GB16 cultures by various purification procedures and was identified as a surfactin-like lipopeptide based on the Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), high performance liquid chromatography mass spectroscopy (HPLC-MS), and quadrupole time-of-flight (Q-TOF) ESI-MS/MS data. The lipopeptide, named GB16-BS, completely inhibited the growth of Pythium aphanidermatum, Rhizoctonia solani, Penicillium sp., and Botrytis cineria at concentrations of 10 and 50 mg/L, respectively. A novel method to prevent the foaming and to provide oxygen was developed. During the production of surface active agent, such as lipopeptide (surfactin), large amount of foam was produced by aeration. This resulted in the carryover of cells to the outside of the fermentor, which leads to the significant loss of cells. Instead of using cell-toxic antifoaming agents, low amount of hydrogen peroxide was added. Catalase produced by cells converted hydrogen peroxide into oxygen and water. Also addition of corn oil as an oxygen vector as well as antifoaming agent was attempted. In addition, Ca-stearate, a metal soap, was added to enhance the antifoam activity of com oil. These methods could prevent the foaming significantly and maintained high dissolved oxygen in spite of lower aeration and agitation. Using these methods, high cell density, could be achieved with increased lipopeptide productivity. In conclusion to produce an effective biological control agent for soil-borne infectious disease, following strategies were attempted i) effective screening of antagonist by including surface tension as an important decision factor ii) identification of antifungal compound produced from the isolated strain iii) novel oxygenation by $H_2O_2-catalase$ with vegetable oil for antifungal lipopeptide production.

• 공업화학
• /
• 제27권4호
• /
• pp.371-379
• /
• 2016

사용 후 발생되는 폐 LCD판넬용 유리의 재활용 방안을 마련하고자 별도의 전처리 없이 폐 LCD판넬을 습식분쇄함으로서 발포체 제조용 원료유리로 사용가능한 폐 붕규산유리의 회수 방법을 조사하였으며, 이렇게 회수된 폐 붕규산유리를 사용하여 발포체의 제조를 시도하였다. 입도 270 mesh 이하의 크기로 분쇄 조절된 폐 붕규산유리를 대상으로 폐 붕규산분말 100 g에 대해 발포제로서 탄소분을 0.3 중량 분율, 추가 발포조제로서 $Na_2CO_3$, $Na_2SO_4$, $CaCO_3$를 각각 1.5 중량 분율이 되도록 첨가한 원료 유리분말을 발포소성온도 $950^{\circ}C$에서 20 min간 발포를 진행함으로서 밀도가 $0.3g/cm^3$ 이하되는 발포체를 제조할 수 있었다. 또한 원료 유리에 추가적으로 $SiO_2$ 또는 $H_3BO_3$를 첨가함으로서 얻어지는 발포체에 효과적으로 개기공을 형성할 수 있었으며, 개기공의 형성은 흡음 등 새로운 기능을 가진 발포체의 제조 가능성을 보여주었다.

• Elastomers and Composites
• /
• 제35권2호
• /
• pp.106-114
• /
• 2000

상온에서의 충격 흡수특성과 compression set 특성을 향상시키기 위하여 ethylene vinyl acetate copolymer (EVA)와 styrene vinyl isoprene styrene triblock copolymer (SVIS)를 블렌드하여 발포체를 제조하였다. 발포제 및 EVA/SVIS 블렌드비가 발포배율 및 기계적 물성에 미치는 영향을 조사하였다. SVIS 함량이 증가함에 따라 블렌드의 점도는 증가하였고 가교 속도는 감소하였으며, 발포배율은 감소하여 비중은 증가하였다. 발포제 함량 증가, 즉 발포배율 증가에 따른 반발탄성은 변화가 없는 반면에, SVIS 함량 증가에 따라 발포체의 상온에서의 tan ${\delta}$ 값은 증가하였으며 따라서 반발 탄성은 감소함을 알 수 있었다. EVA/SVIS 블렌드 발포체에서 SVIS 함량 증가에 따라 가교밀도와 비중이 증가하므로 compression set 값도 낮은 값을 나타내었다.

• 한국안전학회지
• /
• 제32권1호
• /
• pp.108-114
• /
• 2017

According to an increase in demand for polyurethane soft foam for thermally insulated containers, the purpose of this study is based on redefining existing rigid polyurethane foam insulation KS standard which has been limited to building material-based authentication techniques. Since there are arising concerns of consumer rights and safety due to humidifier fungicides and urethane track incidents, there are elements to be further researched on rigid polyurethane foam insulation for refregerated containers. Thus, we reviewed the prior standards for rigid polyurethane foam insulation and verified the validity of certification testing method for the new standard with self-foamed polyurethane.

• 한국정밀공학회지
• /
• 제29권5호
• /
• pp.572-577
• /
• 2012

Recently porous polymer has widely been applied to packaging, heat isolation, and sound absorption in various fields from the electrics to the automobiles industry. A lot of micro porosities inside foamed polymer provide lower heat conduction and lighter weight than non-porous polymer, because they involve gas or air during foaming process. In this paper experimental approaches of the UV laser micro machining behavior for Expanded Polypropylene (EPP) foamed polymer materials, which have different expansion rates, were investigated. From these results, the ablation phenomena were finally observed that the ablation is depended upon stronger photo-chemical than photo-thermal effect. This study will also help us to understand interaction between UV laser beam and porous polymer.

• KIEAE Journal
• /
• 제14권4호
• /
• pp.133-138
• /
• 2014

The present study was carried out to assess the basic material properties and thermal behavior of light-weight foamed concrete panel mixed with PCM (Phase Changing Material). To do so, this study fabricated light-weight foamed concrete (1.0kg/m3) in pre-foaming method and mixed it with PCM micro capsule of 1-dodecanol and melamine to examine its physical and thermal properties. The results confirmed strength reinforcement effect by proper replacement ratio of fly-ash, which is an industrial by-product, and PCM. In addition, it found out that PCM-mixed light-weight foamed concrete had time delay and temperature reduction effect within the range of PCM phase transition according to the rise of outdoor temperature. It was also observed that the insulation performance of PCM-mixed light-weight foamed concrete was more dependent upon thickness than PCM replacement ratio.

• 공학논문집
• /
• 제8권1호
• /
• pp.31-50
• /
• 2006

수축은 콘크리트에 균열을 발생시키는 경우도 있다. 일반적 조건하에서는 콘크리트의 건조를 피할 수 없으며 건조가 일어나면 수축이 생기므로 대부분의 콘크리트 적용분야에서는 실제로 이와 같이 균열발생을 고려하여야 한다. 균열이 발생한 콘크리트는 균열이 없는 콘크리트에 비하여 강도가 약하고 투과성이 크며 화학적 침식의 영향을 받기 쉽다. 또 재령의 경과에 따라 경량기포콘크리트의 강도발현은 기포제의 종류, 물과 시멘트와의 비, 양생조건 및 기간 등과 같은 인자에 의존하고 있다. 경량기포콘크리트의 강도가 높으면 높을수록 수축에 의하여 균열이 발생할 가능성이 감소한다. 그러므로 온돌구조용으로의 경량기포콘크리트의 강도는 소포율과 시멘트의 건조수축과의 균열저감효과에 크게 의존된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권12호
• /
• pp.1770-1774
• /
• 2000

Extended use of porcine blood in food ingredients depends on the decolorization of red blood cell concentrates and the modification of its functional properties. The purpose of this study is to compare the relative effect of cation ion exchanger for decolorization of porcine red blood globin. The globin extract is freeze-dried for determination of various functional properties, such as solubility, emulsion capability and foaming ability. Since the isoelectric point of blood globin is located at pH 6.8, which is the neutral pH ranges (6-8), so its functionalities are inferior around these pHs. This weakness has been the main reason, which limit the extended use of blood globin in food industry. Acetylation and succinylation of blood globin can be an alternative way to improve its functionalities. These results may provide new information to understand the decolorization mode by cation ion exchanger for the blood globin. With chemical, the functionalities of blood globin could be obviously improved. The above findings could enable food industry to extend the use of blood globin as a food ingredient.

• 한국응용과학기술학회지
• /
• 제3권1호
• /
• pp.65-71
• /
• 1986

Four amphoteric surfactants, 1-(N-alkyl-N,N-dimethyl ammonio)-4-naphthalene sulfonates, were prepared by the alkylation of 1-(N,N-dimethylamino)-4,naphthalene sulfonic acid with chloroalkanes such as 1-decylchloride, 1-tetradecyl chloride and 1-hexadecyl chloride. These quaternary ammonium compounds such as 1-(N-decyl-N, N-dimethylammonio)-4-naphthalene sulfonate, 1-(N-dodecyl-N,N-dimethylammonio)-4-naphthalene sulfonate, 1-(N-tetradecyl-N,N-dimethylammonio)-4-naphthalene sulfonate and 1-(N-hexadecyl-N,N-dimethylammonio)-4-naphthalene sulfonate could be separated by means of thin layes chromatography and column chromatography. The surface chemical properties such as surface tension, foaming power, foam stability, wetting efficiency and solubilizing effect for these four compounds were measured. Also critical micelle concentration and hydrophilic-lipophilic balance(HLB) were evaluated. These compounds showed good surface as O/W type emulsifying agent and detergent.