$Na_2CO_3$. Sodium orthosilicate (Na-OSi), Tetronix T-701 (T-701), Na-dioctyl sulfosuccinate (303C), Newpol PE-68 (PE-68), MJU-100A, and tetrasodium pyrophosphate were blended to prepare high performance alkaline cleaning agents (ACASs). The results of cleaning test with steel specimen showed that ACAS-6 ($Na_2CO_3$ 50g/Na-OSi 35g/T-701 20g/303C 18g/PE-68 17g/MJU-100A 10g/TSPP 20g/ water 180g mixture) had a good cleaning power. The cleaning power for press-rust preventing oil was 98% and 99% degreasing at 4wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively ; for quenching oil, the cleaning power of ACAS-6 was 91% degreasing at 4wt% and $70^{\circ}C$. The foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 6wt%, $60^{\circ}C$ were 18mm and 65mm, respectively. It was concluded that ACAS-6 had a good low foaming cleaning agent.
고급지방산 메틸 에스테르류의 소포제를 합성하고 FT-IR과 $^1H-NMR$ 분석을 통해 확인하였다. FT-IR을 이용하여 합성된 물질의 특징인 -C=O기는 $1740cm^{-1}$ 부근에서, 그리고 C-O기는 $1175cm^{-1}$ 피크 값을 가지는 것을 확인하였다. 또한 $^1H-NMR$ 분석을 통해 에스테르의 -C=O의 Chemical shift가 2.29 ppm에서 나타나는 것을 확인하였다. 표면장력은 Surface Tensiometer CBVP-43을 이용하여 측정하였다. 표면장력은 17.7에서 21 dyne/cm 값을 가진다. SLS 수용액에서의 소포능은 Ross-Miles법을 통해 측정되었다. 4종류의 소포제 중 소포능은 스테아르산메틸을 이용하여 제조한 소포제가 가장 뛰어난 것으로 측정됐다.
본 연구에서는 발포사출성형품의 단점인 외관 품질을 개선하기 위해 순간 금형가열방식인 MmSH(Momentary Mold Surface Heating)을 사용하였다. 또한 발포제의 함량에 따른 발포 체의 구조를 살펴보았다. 일반발포사출과 MmSH방식을 사용 발포사출의 표면거칠기를 비교한 결과 표면이 개선된 것을 볼 수 있었고 발포제의 함량에 따른 발포체의 구조는 함량이 증가함에 따라 중량 감소로 셀 수 증가를 보였지만 어느 한계 이후에서는 영향을 미치지 않는 것으로 보여진다.
The purpose of this study is to investigate the fundamental properties of polyurethan concrete. Polyurethane must be expanded by means of a blowing agent during polymerization. Chemical blowing is caused by the reaction water with isocyanate. Binder system for polyurethane concrete is based on polyol and isocyanate with catalyst, surfactant, and methyl chloride. Polyurethane concretes are prepared with various grading of aggregate, and tested for compressive, flexural strengths, flow test, foaming multiple proportion, working life, condition of surface, distirbution of aggregate. From the test results, the foaming of polyurethane concretes are affceted by amount and grading of aggregate. Workability increases with raising amount of methy chloride and working life reduced according to amount of catalyst. The mix proportion of B with methyl chloride of 1% and catalyst of 0.1g for polyurethane concrete is recommended in consideration of strengths, condition of surface and balance between cost and performance.
폐 LCD 판넬로부터 회수된 폐 붕규산유리를 이용하여 흡음특성을 갖는 알루미늄 함유 붕규산유리발포체의 제조 가능성을 조사하였다. 입도 325 mesh 이하의 크기로 분쇄 조절된 폐 붕규산유리분말 100 g에 대해 발포제로서 탄소분을 0.3중량 분율, $Na_2CO_3$, $Na_2SO_4$, $CaCO_3$를 각각 1.5중량 분율, 기공조절제로서 $H_3BO_3$ 및 $Al_2O_3$를 각각 6.0 및 3.0 중량분율이 되도록 첨가한 원료 유리분말을 발포소성온도 $950^{\circ}C$에서 20 min간 발포를 진행함으로서 개기공률 45%를 갖는 발포체를 제조하였으며 이 경우 흡음률 0.5~0.7의 흡음 특성을 갖고 있음을 보여 주었다. 아울러 이 흡음성능을 지닌 알루미늄 함유 붕규산유리발포체는 밀도 $0.21g/cm^3$, 굽힘강도 $55N/cm^2$ 이상, 압축강도 $298N/cm^2$ 이상의 우수한 물성을 가지고 있어 다양한 용도에 내화학성 및 내열성의 흡음체로 사용될 수 있다.
이축압출기(twin screw extruder)를 이용하여 용융상태에서 furfuryl sulphide를 분지제로 개질 폴리프로필렌(modified polypropylene, m-PP)을 제조하고, 층상 실리케이트와 다중벽 탄소나노튜브(multi-walled carbon nanotube, MWCNT)와의 m-PP/나노필러 복합체를 제조하였다. m-PP의 화학구조와 열적 특성은 적외선분광기(FTIR), 시차주사열용량분석기(DSC)를 이용하여 관찰하였다. m-PP의 화학구조는 3100 $cm^{-1}$에서 나타나는 분지제의 =C-H 신축진동피크를 이용하여 확인하였고, 용융온도는 큰 변화를 보이지 않았지만 결정화온도는 $10-20^{\circ}C$ 가량 증가하였다. m-PP/나노필러 복합체의 유변학적 특성과 분산성 및 발포거동은 동적유변측정기, X-선 회절분석기(XRD), 주사/투과전자현미경(SEM/TEM)을 이용하여 관찰하였다. m-PP/나노필러 복합체의 낮은 주파수 영역에서의 복합점도와 용융탄성이 증가하였으며, 전단담화(shear thinning) 효과 또한 증가하였다. 순수 PP와 비교할 때 m-PP와 m-PP/나노필러 복합체의 발포 거동 개선효과가 우수한 것을 확인하였다.
The relationship between the possible structural change due to chemical modifications and functionality changes was studied in pigskin collagen. Amino groups in collagen were modified by succinylation and reductive alkylation. Carboxyl groups were modified using carbodiimide. Thermal denaturation temperature of collagen increased remarkably by carboxyl groups modification whereas decreased by succinylation and reductive alkylation. Emulsifying capacity was improved by reductive alkylation and carboxyl groups modification while emulsion stability was improved by succinylation. Chemical modifications increased solubility whereas decreased the foaming capacity of collagen. Viscosity of collagen at various pH varied with methods of modification.
Surface chemical properties including surface tension, Ross-Miles foaming power, foam stabilities, emulsifying properties, emulsion stabilities, effectiveness of dispersion, dispersion stabilites of the quaternary ammonium salt type deoxyaminoimositol derivatives such as sixteen kinds of dimethylafkyl-deoxyscyllo-inosityl- dimethylalkyl-2-deoxy-2-myo-inosityl-, dimethylakyl-2-deoxy-2-epi-inosityl- and dimethylalkyl-4-deoxy-4-myo-inosityl ammonium chlorides are tested. And critical micelle concentration of these compounds are estimated from the curves of surface tension and concentration. The experimental results show that the members of this class of compounds have necessary surface active properties to make them effective surfactants.
본 연구는 독립적 기공(또는 기포)을 함유하고 특히, $50kg_f/cm^2$의 압력에도 외형의 변화가 없고, 상온의 액화석유가스 (liquefied petroleum gas; LPG)에 72 h 침적시 무게 변화율이 5 wt% 이내인 LPG 고압 탱크용 발포 부표의 제조 기술을 개발하는데 목적이 있다. 각각의 다른 유황(325 Mesh와 400 Mesh)과 발포제(foaming agent)로 제조된 부표의 내압침적 실험에서 무게 변화율은 큰 차이를 보이지 않았으나 유황 400 Mesh와 발포제 AC를 이용한 부표의 기공이 더 작고 독립 기포율이 높았다. $50kg_f/cm^2$ 수압 실험에서 중립열분해(medium thermal; MT) 카본을 사용한 부표가 중보강성(semi reinforcing furnace; SRF) 카본보다 작은 무게 변화율을 나타내었다. 또한, 제조된 부표를 후처리($60^{\circ}C$, 24 h)한 경우 부표내 기공벽의 경도와 내압성이 증가되었다. 한편, 제조된 부표의 비중 0.30 이하인 제품은 찌그러지거나 깨지는 현상이 발생하고 비중이 0.35 이상으로 높으면 부력이 떨어져 부표로서 기능을 하지 못하였다. 그러므로, $50kg_f/cm^2$의 내압성을 가지기 위해서는 비중이 0.30~0.35인 부표가 가장 우수한 성능을 갖는 것으로 판단되었다.
본 연구에서는 폐폴리에틸렌 (W-PE)/폐에틸렌비닐아세테이트공중합체 (W-EVA) 블렌드계에 무기계 및 인계 난연제 등을 첨가하여 난연폴리올레핀 발포체를 제조하고, 수지대비 난연제, 특히 무기계 난연제의 종류 및 함량 변화에 따른 발포 및 난연특성의 변화를 조사하였다. 그 결과 W-PE/W-EVA 블렌드계의 조성비가 50/50 (w/w)이고, 수지 대비 난연제의 함량이 220phr의 범위 내에서 가교반응을 쉽게 이룰 수 있을 것으로 생각되는 폐고분자재료를 사용함으로써 가교 및 발포가 효과적으로 이루어져 V-PE 난연 발포체와 비교해 비교적 균일한 독립기포를 갖고, 발포율이 오히려 증가 (100 % 이상)함을 알 수 있었으며, 난연특성 (limiting oxygen index; LOI, heat release rate; HRR, total heat release; THR, effective heat of combustion; EHC등) 또한 높음을 확인할 수 있었다. 그리고 난연제의 종류 및 함량이 발포 및 난연특성에 미치는 영향이 큼을, 그리고 무기계 난연제의 난연 및 연기발생억제 효과를 확인하였다. 무기계 난연제 중 수산화알루미늄은 LOI 상승에, 수산화마그네슘은 발포율 상승 및 HRR, COY를 낮추는 데 효과적임을 알 수 있었고, 수산화알루미늄과 수산화마그네슘을 동시에 사용했을 때 상호작용에 따른 시너지 효과로 난연성을 보다 향상시킴을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.