• Carbon letters
• /
• 제5권1호
• /
• pp.18-22
• /
• 2004

The failure behaviours of unidirectional pultruded carbon fiber reinforced polymer (CFRP) composites were monitored by the electrical resistance measurement during tensile loading, three-point-bending, interlaminar shear loading. The tensile failure behaviour of carbon fiber tows was also investigated by the electrical resistance measurement. Infrared thermography non-destructive evaluation was performed in real time during tensile test of CFRP composites to validate the change of microdamage in the materials. Experiment results demonstrated that the CFRP composites and carbon fiber tows were damaged by different damage mechinsms during tensile loading, for the CFRP composites, mainly being in the forms of matrix damage and the debonding between matrix and fibers, while for the carbon fiber tows, mainly being in the forms of fiber fracture. The correlation between the infrared thermographs and the change in the electrical resistance could be regarded as an evidence of the damage mechanisms of the CFRP composites. During three-point-bending loading, the main damage forms were the simultaneity fracture of matrix and fibers firstly, then matrix cracking and the debonding between matrix and fiber were carried out. This results can be shown in Fig. 9(a) and (b). During interlaminar shear loading, the change in the electrical resistance was related to the damage degree of interlaminar structure. Electrical resistance measurement was more sensitive to the damage behaviour of the CFRP composites than the stress/time curve.

• Corrosion Science and Technology
• /
• 제10권3호
• /
• pp.77-79
• /
• 2011

The research trend in the corrosion behaviour of stainless steel weldment has been reviewed. The welding technology plays an important role in the fabrication of structure such as chemical plant, power plant, because welding can influence various factors in the performance of plant and equipment. This has led to an increasing attention towards the corrosion behaviour of weldment which has been one of the major issues for both welding and corrosion research engineers. The aim of this paper is to give a short survey of the recent technical trends of welding and corrosion including the electrochemical corrosion, stress corrosion cracking, and corrosion fatigue in connection with the welding materials, welding process, and welding fabrication. This study covers the corrosion behaviour of stainless steel weldment collected from the COMPENDEX DB analysis of published papers, research subject and research institutes.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.445-451
• /
• 2002

The refractory-lined pipe is used to protect the system from high-temperature of the internal flow. The property of the refractory has an effect upon the stress analysis for fluid catalytic cracking(FCC) unit piping design. The equivalent elastic modulus and density considering steel and refractory must be applied in the stress analysis of the system. In the research, the theoretical method to obtain the value of the equivalent property is introduced and then the parametric analysis is carried out to understand the characteristic of the material properties, and the stress analysis is performed with reactor, the part of FCC unit.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.547-550
• /
• 2000

The steel pipe for fluid catalytic cracking(FCC) unit. petroleum refinery, is lined with refractory to protect the system from high-temperature of the internal flow. The property of the refractory has an effect upon the stress analysis of FCC unit. Because 1-D pipe element or 3-D shell element are usually used in commercial codes of stress analysis to evaluate the structural soundness, the equivalent elastic modulus considering steel and refractory should be applied. In the research, the theoretical method to obtain the value of the equivalent property is introduced and then the stress analysis is carried out with the part of FCC unit.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.964-968
• /
• 2001

The refractory-lined pipe is used to protect the system from high-temperature of the internal flow. The property of the refractory has an effect upon the stress analysis for fluid catalyst cracking(FCC) unit piping design. The equivalent elastic modulus and density considering steel and refractory must be applied in the stress analysis of the system. In the research, the theoretical method to obtain the value of the equivalent property is introduced and then the parametric analysis is carried out to understand the characteristic of the material properties.

• Journal of Welding and Joining
• /
• 제11권1호
• /
• pp.21-32
• /
• 1993

A cracking failure of a austenitic stainless steel elbow in a naphtha cracking line in a petrochenmical plant occurred, resulting in leakage of organic compound flowing inside the elbow. Due to the failure, emergency shutdown of the plant was enforced to repair the troubled part of the line. The repair cost as well as production loss during the unscheduled plant shutdown has cost the company a great amount of financial loss. In this studies, a failure analysis of the cracked elbow was performed using NDT, chemical analysis, microstructural analysis including optical microscopy as well as scanning electron microscopy with EPMA, mechanical testings such as tensile testing, hardness testing and Charphy impact test fractography. The results indicated that several problems such as a welding defect and presence of a detrimental phase which was found to be relate to improper postforming heat treatment process was identified and the failure was concluded to be due to a low temperature embrittlement of the defect-containing elbows.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.940-945
• /
• 1998

Recently, serious cracking problems have been reported in this country while the process of actual massive concrete construction. he hydration heat arising from the chemical reaction of cement with water causes temperature differentials in between inside and outside of a structural member, and these temperature differentials induce thermal stresses. In this paper, we described on the practical application and quality control of the mass concrete mixed with fly-ash. This project is investigating adiabatic temperature rise test of concrete, mock-up test in the laboratory, ad B/P before placing the mass concrete in site. As a result, we can be prevent temperature cracking from the cement hydration heat of mass concrete and also can be showed up secure quality control flow chart of mass concrete.

• International Journal of Railway
• /
• 제8권2호
• /
• pp.42-45
• /
• 2015

Alkali-silica reaction (ASR) is a chemical reaction in concrete that alkalis in cement react with reactive silica in aggregate in the presence of water. When ASR takes place, it produces gels that absorb water and expand. Swelling of ASR gels can damage concrete and cause cracking and volume expansion in concrete structure. In this paper, mechanical consequences of ASR on concrete are simulated by a finite element (FE) analysis. An FE model of concrete is built. The evolution of concrete mechanical properties subjected to ASR is achieved by FE analyses. The constitutive model of concrete is attained via the FE analysis. A case study is used to demonstrate the proposed method. The simulated results using the proposed model are in good agreement with the observations of concrete with ASR reported in the literature. The results can be used for a basic research to enhance durability of concrete slab tracks and concrete railway sleepers.

• 공업화학
• /
• 제20권1호
• /
• pp.1-8
• /
• 2009

바이오오일은 고부가가치 화학물질이나 차세대 탄화수소 연료 생산을 위한 석유정제시설의 연료로서 사용이 가능하기 때문에 전도유망한 신재생 에너지원 가운데 하나로 상당한 관심을 불러일으키고 있다. 바이오오일을 석유정제시설에 공급하기 위해서는 전처리 과정으로 안정화 공정이 필요하며, 이를 위한 방법 가운데 현재로서는 촉매 접촉 분해법이 잠재성이 가장 높은 것으로 인식되고 있다. 본 총설에서는 촉매 접촉 분해법을 활용한 바이오오일 개질에 관한 최근 연구 동향을 적용된 촉매의 성능과 개질 방법을 중심으로 소개하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.917-920
• /
• 2008

ECC는 섬유가 매트릭스의 균열 면에서 가교작용을 통하여 균열의 폭을 제어함으로써 미세한 다중 균열(multiple cracking)을 발생시키면서 인장변형률 경화 거동을 보이는 섬유복합재료이다. 따라서 다중 균열과 인장변형률 경화 거동을 보일 수 있도록 마이크로역학에 기반하여 재료를 설계한다. 이 연구에서는 ECC의 다중 균열과 변형률 경화 거동을 모사할 수 있는 해석 방법을 제시하고자 한다. 이 과정에서 균열 면에서 이론적으로 유도된 가교응력-개구변위 관계에서 섬유의 방향과 유효 섬유의 개수를 고려하여 수정된 응력-변위 관계를 사용하였으며, 매트릭스 및 섬유-매트릭스 계면의 불확실성을 고려하기 위하여 각 요소의 매트릭스 균열 강도(${\sigma}_{fci}$) 및 탄성계수($E_{ci}$), 균열면 최대응력(${\sigma}_{Bi}$) 및 변위(${\delta}_{Bi}$), 계면의 화학적 부착에 의한 균열면의 초기응력(${\sigma}_{0i}$), 균열 간격(${\alpha}_cX_d$)이 일정 범위 내에서 무작위로 선택되도록 하였다. 해석결과 변형률 경화거동 및 최대 변형률을 충분히 모사할 수 있는 것으로 나타났으며, 균열 개수 및 균열면의 강성이 해석의 중요한 변수임을 확인할 수 있었다.