• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.533-542
• /
• 2010

The $PM_{10}$ concentrations in the underground should be monitored for the health of commuters on the underground subway system. Seoul Metro and Seoul Metropolitan Rapid Transit Corporation are measuring several air pollutants regularly. As for the measurement of $PM_{10}$ concentrations, instruments based on $\beta$-ray absorption method and gravimetric methods are being used. But the instruments using gravimetric method give us 20-hour-average data and the $\beta$-ray instruments can measure the $PM_{10}$ concentration every one hour. In order to keep the $PM_{10}$ concentrations under a healthy condition, the air quality of the underground platform and tunnels should be monitored and controlled continuously. The $PM_{10}$ instruments using light scattering method can measure the $PM_{10}$ concentrations every less than one minute. However, the reliability of the instruments using light scattering method is still not proved. The purpose of this work is to study the reliability of the instruments using light scattering method to measure the $PM_{10}$ concentrations continuously in the underground platforms. One instrument using $\beta$-ray absorption method and two different instruments using light scattering method (LSM1, LSM2) were placed at the platform of the Jegi station of Seoul metro line Number 1 for 10 days. The correlation between the $\beta$-ray instrument and the LSM2 ($r^2$=0.732) was higher than that between the $\beta$-ray instrument and the LSM1 ($r^2$=0.393). Thus the LSM2 was chosen for further analysis. Three different regression analysis methods were tested: Linear regression analysis, Nonlinear regression analysis and Orthogonal regression analysis. When the instruments using light scattering method were used, the data measured these instruments have to be converted to actual $PM_{10}$ concentrations using some factors. With these analyses, the factors could be calculated successfully as linear and nonlinear forms with respect to the data. And the orthogonal regression analysis was performed better than the ordinary least squares method by 28.45% reduction of RMSE. These findings propose that the instruments using light scattering method light scattering method can be used to measure and control the $PM_{10}$ concentrations of the underground subway stations.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.3
• /
• pp.532-538
• /
• 2008

For the newly isolated $H_2$-producing chemoheterotrophic bacterium Citrobacter amalonaticus Y19, anaerobic glucose metabolism was studied in batch cultivation at varying initial glucose concentrations (3.5-9.5 g/l). The carbon-mass and energy balances were determined and utilized to analyze the carbon metabolic-pathways network. The analyses revealed (a) variable production of major metabolites ($H_2$, ethanol, acetate, lactate, $CO_2$, and cell mass) depending on initial glucose levels; (b) influence of NADH regeneration on the production of acetate, lactate, and ethanol; and (c) influence of the molar production of ATP on the production of biomass. The results reported in this paper suggest how the carbon metabolic pathway(s) should be designed for optimal Hz production, especially at high glucose concentrations, such as by blocking the carbon flux via lactate dehydrogenase from the pyruvate node.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.5
• /
• pp.930-937
• /
• 2005

The Plackett-Burman design and the response surface method (RSM) with a central composite design (CCD) were employed to develop a culture medium for ansamitocin P-3 production using Actinosynnema pretiosum ATCC 31565. Among the 11 nutrients tested using the Plackett-Burman design, two carbon sources, sucrose and dextrin, and two nitrogen sources, polypeptone and yeast extract, were selected. Optimization of the concentrations of the selected nutrients was then performed using RSM with CCD. After two rounds of RSM, the optimum concentrations ($\%w/v$) of sucrose, dextrin, polypeptone, and yeast extract were identified as 4.5, 4.5, 0.16, and 0.89, respectively. The maximum ansamitocin P-3 titer was 45.2 mg/l with the optimized medium, which was about 6 times higher than that (7.315 mg/l) obtained with an $R_{2}YE$ medium before optimization.

• Journal of Aquaculture
• /
• v.18 no.3
• /
• pp.196-199
• /
• 2005

Farmed red sea breams, Pagrus major, were fed for 60 days with pellets containing different concentrations of benzo(a)pyrene (0, 0.2, 2, 20 mg/kg) to generate a biomarker of the chemical toxicity in the fish. The fish exposed to the chemical concentrations did not show any significant difference in the weight gain, conditioning, factor, and hepatosomatic index. However, some haematological parameters, such as glucose, calcium, magnesium, GOT (glutamic oxalate transaminase), and GPT (glutamic pyruvate transaminase) were influenced by the chemical exposure. Of them, two enzymes, GOT and GPT, increased significantly 60 days after the exposure in a way of concentration dependence (P<0.05). In the study of ecotoxicological biomarker, sensitivity to adverse environments is one of the key available factors. The fish changes in GOT and GPT were an earlier and reliable sign of the fish response against the chemical exposure, rendering the two enzymatic factors as a useful biomarker at least to benzo(a)pyrene exposure in the farming waters.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.61-64
• /
• 2003

This study was conducted to investigate the chemical characteristics of $PM^{10}$ at Anmyeon-do during the periods from January 1998 to December 2001. The $PM^{10}$ samples ($PM^{10}$) were collected by High Volume Air sampler (HVAS). The measured items were mass concentration of $PM^{10}$ with the major ions ($Cl^{-}$, ${SO_{4}}^{2-}$, ${NO_3}^{-}$, ${Mg}^{2+}$, ${Ca}^{2+}$, ${K}^{+}$etc.) and metallic elements (AI, Fe, Mn, Cr, Zn, Pb etc.). The chemical analysis of major ion components were made by Ion Chromatography (DX-500) and that of metallic elements were made by Inductively Coupled Plasma Spectrometer (ICP-AES, ICP-Mass). The average mass concentration of $PM^{10}$ increased substantially during the heavy dust periods (Asian Dust cases). For water-soluble ions, concentrations of ${Ca}^{2+}$, ${SO_{4}}^{2-}$ and ${NO_3}^{-}$ were remarkably enhanced. Concentrations and mass fraction of crustal elements such as Na, Mg, Ca, Fe, Mn were highly elevated, but those of pollution-derived heavy metals were appreciably decreased. The factor analysis was conducted in order to make the large and diverse data set as manageable levels and to qualitatively examine the relationship between the variables.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.548-555
• /
• 2023

SAPO-34 catalysts were modified with polyethylene glycol (PEG) and Pb to improve their catalytic lifetime and selectivity for light olefins in the conversion of dimethyl ether to olefins (DTO). Hierarchical SAPO-34 catalysts and PbAPSO-34 catalysts were synthesized according to changes in the molecular weight of PEG (M.W. = 1000, 2000, 4000) and the molar ratio of Pb/Al (Pb/Al = 0.0015, 0.0025, 0.0035), respectively. By introducing PEG into the SAPO-34 catalyst crystals, an enhanced volume of mesopores and reduced acidity were observed, resulting in improved catalytic performance. Pb was successfully substituted into the SAPO-34 catalyst frameworks, and an increased BET surface area and concentration of acid sites in the PbAPSO-34 catalysts were observed. In particular, the concentrations of the weak acid sites, which induce a mild reaction, were increased compared with the concentrations of strong acid sites. Then, the P2000-Pb(25)APSO-34 catalyst was prepared by simultaneously utilizing the synthesis conditions for the P2000 SAPO-34 and Pb(25)APSO-34 catalysts. The P2000-Pb(25)APSO-34 catalyst showed the best catalytic lifetime (183 min based on DME conversion > 90%), with an approximately 62% improvement compared to that of the unmodified catalyst (113 min).

• Journal of Soil and Groundwater Environment
• /
• v.25 no.1
• /
• pp.74-83
• /
• 2020

In this study, the effect of hydrochloric acid (HCl) concentrations on removal efficiency and chemical forms of heavy metals in dredged sediment during acid washing was investigated. The removal efficiencies of Zn, Cu, Pb, Ni and Cd by acid washing were 18.4-92.4%, 7.2-83.7%, 9.4-75%, 8.1-53.4% and 34.4-70.8%, respectively. Overall, the removal efficiencies of heavy metals were remarkably enhanced with the increase of the acid strength. However, the removal efficiencies for 0.5 and 1.0 M HCl were comparable, and both cases met the Korean soil contamination standard. Based on the sequential extraction results, concentration of the exchangeable fraction (F1), the most labile fraction, increased whereas concentrations of the other fractions decreased with increasing acid strength. Particularly, the carbonate (F2) and Fe/Mn oxides (F3) fractions drastically decreased by using 0.5 M or 1.0 M HCl. The current study results verified that acid washing could effectively reduce heavy metal concentrations and its potential mobility in dredged sediments. However, the study also found that acid washing may cause significant increase in bioavailable fraction of heavy metals, suggesting the need to evaluate the changes in chemical forms of heavy metals by acid washing when determining the acid strength to be applied.

• KSBB Journal
• /
• v.20 no.3
• /
• pp.244-249
• /
• 2005

Chiral separation of racemic ibuprofen was achieved on a Kromasil KR100-5CHI-TBB column. Some chromatographic parameters (resolution, number of theoretical plates, HETP, capacity factor) are calculated under different separation conditions such as change of mobile phase compositions (hexane / t-BME : 85 / 15, 75 / 15, 65 / 35, 55 /45) as well as acetic acid concentrations for adjusting pH (0.1 to 1 $v/v\%$). Flow rate versus number of theoretical plates and HETP were compared to evaluate column efficiency. To determine the adsorption isotherms, PIM (Pulsed Input Method) was carried out. At concentrations of racemic ibuprofen between 0.1 and 0.3 mg/ml, S- and R-ibuprofen have the same retention time of 4.48 and 5.81 min. Ibuprofen isotherms show a linear form under concentrations of 0.3 mg/ml with eluent (hexane / t-BME = 55 / 45).

• Bulletin of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.382-388
• /
• 2004

The sizes and structures of micelles formed in aqueous solutions of cationic octadecyl trimethyl ammonium chloride (OTAC) and anionic ammonium dodecyl sulfate (ADS) surfactants were investigated using smallangle neutron scattering (SANS), self-diffusion coefficients by pulsed-gradient spin-echo (PGSE) NMR, and dynamic light scattering (DLS) methods. SANS and DLS data indicate that their structures are spherical at concentrations as high as 300 mM. As the total surfactant concentration increases, the peaks of SANS spectra shift to higher scattering vector and become sharper, indicating that the intermicellar distance decreases and its distribution becomes narrower. This is due to more compact packing of surfactant molecules at high concentrations. The intermicellar distance of around 100 ${\AA}$ above 200 mM corresponds approximately to the diameter of one micelle. The sizes of spherical micelles are 61 ${\AA}$ and 41 ${\AA}$ for 9 mM OTAC and 10 mM ADS, respectively. Also the self-diffusion coefficients by PGSE-NMR yield the apparent sizes 96 ${\AA}$ and 31 ${\AA}$ for micelles of 1 mM OTAC and 10 mM ADS, respectively. For ADS solutions of high concentrations (100-300 mM), DLS data show that the micelle size remains constant at $25{\pm}2{\AA}$. This indicates that the transition in micellar shape does not take place up to 300 mM, which is consistent with the SANS results.

• Journal of Applied Biological Chemistry
• /
• v.63 no.3
• /
• pp.243-248
• /
• 2020

The long-chained perfluoroalkyl acids (PFAAs), perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), are a potential exposure risk in the environment, specifically for humans due to high levels of bioaccumulation, persistence, and toxicity. In the current study, the plant uptake factors (PUFs) of spinach and Welsh onion were investigated on the three different concentration levels of PFOA and PFOS in soil. Spinach and Welsh onion were divided into three residue groups, a control group and two levels of PFOA and PFOS. The PFAAs spiked soils were aged for six months and the extractable residue of PFOS in the aged soil was reduced to 30-59% of the initial spiked concentrations for PFOS, while PFOA showed almost the same initial spiked concentrations. The PUFs for PFOA and PFOS were 0.111-2.821 and 0.047-3.175 for spinach, and 0.203-0.738 and 0.035-0.181 for Welsh onion, respectively. The highest PUF values in both vegetable were displayed when the residual concentration of PFAAs were part-per-billion (ppb) or sub-ppb in soil.