• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.287-293
• /
• 1997

This study was investigated to viscosity, color, chemical properties, and lipid and fatty acid composition for examination of physical and chemical characteristics of sesame oils. Yield of sesame oil was higher in Ansan sesame than that of Chinese and Dambaek sesame. Viscosity of sesame oils was higher than that of shame oils from Dambaek and Chinese sesame, but turbidity and sedimentation rate were higher in Dambaek's sesame oil than those of Ansan's and Chinese sesame oils. In the acid value, saponification value and iodine value of sesame oils, and chemical characteristics of Dambaek's sesame oil were better than those of the others. The neutral, glycolipid and phosholipid contents of sesame oils were 91.1∼92.1, 2.5∼3.5 and 5.5∼6.4%, respectively. The major fatty acids of sesame oils were oleic, linoleic palmitic and stearic acid. The content of oleic acid was higher in Dambaek's and Ansan's sesame oil than that of Chinese sesame oil, and the content of linoleic acid was higher in Chinese sesame oil than the others. The fatty acid composition of neutral lipid, glycolipid and phospholipid were similar to those of total lipid. The ratio of unsaturated fatty acid and saturated fatty acid was higher in Korean sesame oils than those in Chinese sesame oil. The mineral(Mg, Cu, Fe, In, Al, Mn) content of Korean sesame oils was higher than that of Chinese sesame oil. and heavy metals(Cu, Ag, Pb, Cd, As) were not detected.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10c
• /
• pp.7-12
• /
• 1998

The waste sludge is by-produced about 20-30% of total production and arised to the severe problems of this mine's surrounding environmnet. This study was invested the composition of component, particle of size of the waste sludge by Chemical Analysis, X, R, D, Particle Size Analyzer and the physical properties (air content, slump, strength, etc) of concrete when the waste sludge is added into concrete. so, It's recomended the proper content of the waste sludge to be added into concrete. and then, is verified to be applied at batch plant in field. Above the results, the recomeded content of the waste sludge is about 2-4% (about 4-8% in cement) in aggregates and when it's added the recomended content, they are detected to be more or less changed the physical properties of concrete, ( equally strength and durability, little less air con tent, little increased shinkage, etc). but the application of the recomended content don't arise the problem of the basic quality control of concrete and physical properties.

• Journal of Bio-Environment Control
• /
• v.9 no.1
• /
• pp.47-59
• /
• 2000

In order to investigate the physical and chemical properties of artificial culture media, the specimens were substituted with 5~20％ clay, 10~30％(w) quick lime, 5~l5％(w) burnt plaster and 10％(w) sawdust. Fly ash-clay bodies were sintered at 1,050~1,20$0^{\circ}C$ and then their properties were determined. It was found that 90FA10JC(fly ash ＋clay(90：10, ％(w)) specimen sintered at 1,15$0^{\circ}C$ for 10 min. had good physical and chemical properties. When this composition was supplement with 10％(w) sawdust, bulk density water absorption, apparent porosity, compressive strength and pH after 240 hrs curing time were 1.14, 54.4％, 39.5％, 54 kgf.cm$^{-2}$ and 7.1 respectively. The physical properties of fly ash-quick lime-burnt plaster system specimens were superior to FAJC systems. However, this composition we not suitable as a artificial culture media because of its high pH. In this study, it was shown that 90FA10JC10SD(90FA10JC ＋10％(w) sawdust) system exhibited the best physical properties.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.105-108
• /
• 2001

In this paper, we evaluated the suitability of steel slag(is divided with electric arc furnace slag and converter slag) as concrete aggregate by measuring physical and chemical characteristics of it. The steel slag mainly contains SiO$_2$ and CaO as the chemical composition. The reaction with water and a little of free CaO in the slag causes slag's volume to expand. Therefore, we used several aging methods in order to decrease the characteristics of slag volume expansion. The physical properties of steel slag aggregate are researched and then the strength of concrete with the steel slag aggregate is measured.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.577-582
• /
• 2000

Interdiffusion process at interfaces of chemically identical polymers (e.g., deuterated-nondeuterated pairs) with different molecular weights or polymers with similar physical properties, is studied here by varying the diffusion time. Considering the vacancy flux ($J_v$) and adopting the Cahn-Hilliard interracial energy in describing this system, we can see that the variation of the interfacial composition profile with time is asymetric and the interface moves towards the polymer with the lower molecular weight as interdiffusion progresses. Furthermore, interface shift $\Delta\chi$, which characterizes the interdiffusion between polymers, agrees well with the behaviors of the existing experimental data. We can also obtain the interface shift factor C, which can be converted into values of $D_s$ (self-diffusion coefficient of the smaller molecules), from the slopes of the linear fits to the data of the interface shift.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.81-85
• /
• 2003

PU block polymers are constituted by sequences of constitutional units CU which are : a diisocyanate T, a polyol or a polyamine V, an extensor E .Due to the CU different solubility parameters ,hard and soft micro domains are formed;they can aggregate into different phases. A linear PU can be described by two parameters R=T/N and $R_{E}$=(R-1)V/E.A stoichiometric model is proposed which gives the general formula of all the possible PU: X((TV)$_{k}$(TE)$_{n}$)$_{m}$X , where k and m can be calculated from the experimental molecular weights respectively of pre polymer and polymer and n= R-1.Physical properties depend on PU composition and on nature of CU. I.R. analysis is useful for discovering the hydrogen bonds location : DSC gives informations on the presence of the different phases .PALS analysis shows that nano cavities become tighter on increasing n. A series of particular Pus ,obtained from :TDI, a low molecular weight polyol, a cyclic extensor, at different R and RE was prepared and analysed. These PU are amorphous, monophasic and appear to be good candidates for membranes.nes.nes.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.35.1-35.1
• /
• 2010

Using the spectroscopic analysis and the theoretical modeling, physical properties of the nearby astrometric binary $\mu$ Cas have been determined. In spite of the well-defined parallax and astrometric orbit, there has been a chronic mass ratio problem between components. Recently, the radius of the primary component has been detected from the optical interferometric observation of the CHARA array. Using the high resolution spectroscopic analysis, we found that $\mu$ Cas have $\alpha$-enhanced chemical composition with respect to the scaled solar abundance by a factor of two. Combining our abundance analysis with recently determined physical properties, the consistent models for $\mu$ Cas have been constructed within the frame work of standard stellar theory. Through a statistical minimization between theoretical model grids, a reliable set of physical dimensions has been defined. Furthermore, the mode oscillation frequency of the best model has been calculated.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.2
• /
• pp.91-95
• /
• 1998

Some physical properties and chemical compositions of Lycii Cortex depending on the various extracting conditions were investigated for their changes during extraction with ethanol and water. Solid matter and contents of total sugar in water extracts were higher than those of ethanol extract. but contents of tannic acid in ethanol extracts was higher than that in water extracts. The methanol extract of the Lycii Cortex were fractionated with ethyl ether. ethyl acetate. n-butanol and water. The yield was higher in the order of water > n - butanol > ethyl ether and ethyl acetate fraction. Turbidity of water extraction was higher than that of ethanol extraction.

• Elastomers and Composites
• /
• v.57 no.4
• /
• pp.188-196
• /
• 2022

Styrene-butadiene rubber(SBR) is a copolymer of styrene and butadiene. It is composed of 1,2-unit, 1,4-unit, and styrene, and its properties are dependent on its microstructure. In general, rubber composites contain a single rubber or a blended rubber. Similarly, SBR is used by mixing with natural rubber(NR) and butadiene rubber(BR). The composition of a rubber article affects its physical and chemical properties. Herein, an analytical method for determining the microstructure of SBR using via pyrolysis is introduced. Pyrolysis-gas chromatography/mass spectrometry is widely used to analyze the microstructure of polymeric materials. The microstructure of SBR can be determined by analyzing the principal pyrolysis products formed from SBR, such as 4-vinylcyclohexene, styrene, 2-phenylpropene, 3-phenylcyclopentene, and 4-phenylcyclohexene. An analytical method for determining the composition of SBR/NR, SBR/BR, and SBR/NR/BR blends via pyrolysis is introduced. The composition of blended rubber can be determined by analyzing the principal pyrolysis products formed from each rubber component.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.55-61
• /
• 1986

Phosphosilicate glass(PSG) films have been used as fusable deposited dielectrics in silicon gate MOS integrated circuits. But in this experiment BPSG(borophosphosilicate glass) will be optimized for more efficient utilization of the reactants. The BPSG films were deposited on silicon wafers by the oxidation of the hydrides at 430$^{\circ}$C in conventional atmospheric-pressure chemical-vapor-deposition (CVD) systems. Physical and chemical properties of CVD BPSG films have been characterized both for as-deposited and for fused films The. relationship between deposited BPSG film composition and infra-red absorption solution etch rate and fusion temperature is discussed and examples of BPSG composition that can be fused at 900~95$0^{\circ}C$ and 800~85$0^{\circ}C$ are given. In addition to having lower fusion temperature than PSG films BPSG films have lower as-deposited intrinsic tensile stress and low aqueous chemical etch rate they have been considered for applications where these characteristics are advantageous.