• 한국연초학회지
• /
• 제18권1호
• /
• pp.49-53
• /
• 1996

This experiment was carried out to study the effect of oxygen on chemical composition and physical properties of tobacco leaves during flue-curing. The results obtained were as follows: Starch content decreased and sucrose content increased with increasing oxygen supply during curing. Glucose and fructose of the cured leaves showed high content at the 5-10% oxygen supply. Amino-N and nitrate-N increased with increasing oxygen supply. Total nitrogen and NH4-N showed the lowest value at the 5-10% and 10-15% oxygen supply in the cutters and leaf, respectively. Chlorophyll and chlorogenic acid increased, and total volatile base decreased with increasing oxygen supply. The activity of α-amylase increased at the latter period of flue-curing, and the maximum activity point were delayed 12 hours with increasing oxygen supply. Shatter index of cured leaves decreased with increasing oxygen supply. It was desirable to supply oxygen during flue-curing for the improvement of chemical and physical properties such as starch, total sugar, chlorogenic acid, and shatter index of cured leaves.

• 한국가구학회지
• /
• 제11권1호
• /
• pp.75-84
• /
• 2000

Ginkgo trees have long been planted in Korea as roadside trees and ornamental trees, but the wood was seldom used except some utilization for small artifacts. Soaring prices of imported wood and future uncertainty about long-term supply of foreign woods have stimulated research on value-added utilization of less-utilized domestic wood resources such as Ginkgo wood. The properties of Ginkgo wood were investigated to determine its utilization potential in this study, and the results of anatomical, physical, and mechanical studies were presented with chemical compositions.

• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.832-837
• /
• 2006

Antennas were fabricated by physical(adhesive) and chemical(deposition+plating) method on organic-inorganic composite material. And antennas were measured dielectric constant and gain. Dielectric constant of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness and number of conduction material composition. But antennas were fabricated by chemical method was reached to 90 % of dielectric material. Gain of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness. But they were unrelated with conduction material composition. The other side antennas were fabricated by chemical method excelled more 0.8 dBic than antennas were fabricated by physical method in gain of antenna. Finally, chemical method can expect excellent product process because it can produce smaller size, higher gain and elimination of many handworks.

• 한국재료학회지
• /
• 제24권12호
• /
• pp.682-688
• /
• 2014

Physical and chemical changes in a polished wafer and in $2.5{\mu}m$ & $4{\mu}m$ epitaxially grown Si layer wafers (Epilayer wafer) after surface treatment were investigated. We characterized the influence of surface treatment on wafer properties such as surface roughness and the chemical composition and bonds. After each surface treatment, the physical change of the wafer surface was evaluated by atomic force microscopy to confirm the surface morphology and roughness. In addition, chemical changes in the wafer surface were studied by X-ray photoemission spectroscopy measurement. Changes in the chemical composition were confirmed before and after the surface treatment. By combined analysis of the physical and chemical changes, we found that diluted hydrofluoric acid treatment is more effective than buffered oxide etching for $SiO_2$ removal in both polished and Epi-Layer wafers; however, the etch rate and the surface roughness in the given treatment are different among the polished $2.5{\mu}m$ and $4{\mu}m$ Epi-layer wafers in spite of the identical bulk structural properties of these wafers. This study therefore suggests that independent surface treatment optimization is required for each wafer type, $2.5{\mu}m$ and $4{\mu}m$, due to the meaningful differences in the initial surface chemical and physical properties.

• Journal of Biosystems Engineering
• /
• 제24권5호
• /
• pp.407-414
• /
• 1999

To evaluate the quality of flame-peeled chestnuts, their physical and chemical properties were analyzed. The physicochemical properties of flame-peeled chestnuts, including geometrical shape, texture and chemical composition, were compared to those of hand-peeled ones. For the flame-peeled chestnuts, some properties in heated and non-heated sections were separately analyzed. The color, texture such as springness, cohesiveness, adhesiveness, hardness and chewiness, moisture content, and reducing sugar of the heated section of the flame-peeled chestnuts were significantly different with their non-heated section. But the physicochemical properties of the non-heated section of the flame-peeled chestnuts were similar to those of the hand-peeled ones.

• 폴리머
• /
• 제33권4호
• /
• pp.384-388
• /
• 2009

폴리아크릴로니트릴(PAN)과 셀룰로오스 아세테이트(CA) 블렌드/디메틸포름아미드(DMF) 용액의 유변학적 특성을 온도와 블렌드 조성비에 대하여 조사하였다. 모든 고분자 용액이 온도 변화에 따라 매우 특징적인 유변학적 거동을 보였다. 8 wt% 용액의 경우 $20{\sim}60^{\circ}C$ 온도범위에서 온도의 증가와 더불어 용액의 점도가 증가하고 손실탄젠트값이 감소하였다. $20^{\circ}C$에서는 용액의 물성이 블렌드의 조성에 영향을 받았으나 40 및 $60^{\circ}C$에서는 조성비가 용액 물성에 미치는 영향이 크게 감소하였다. 더 높은 온도에서의 더 긴 분자 이완시간으로부터 온도가 증가함에 따라 분자간력에 의한 물리적 구조 형성이 촉진된다는 것을 알 수 있었다. 이러한 유변학적 특성에 대한 원인은 묽은 용액의 특성으로부터 유추할 수 있었다. 고분자 용액의 고유점도가 온도가 증가함에 따라 감소하였다.

• 한국응용과학기술학회지
• /
• 제25권1호
• /
• pp.1-14
• /
• 2008

To prepare weather-resistant modified silane acrylic resin coatings for an architectural purpose, tetrapolymers were synthesized by radical polymerization. 3-Methacryloxypropyltrimethoxysilane (MPTS) as a silicone monomer and n-butyl acrylate, methyl methacrylate, and n-butyl methacrylate as acrylic monomers were used. The composition of monomers was adjusted to fix the glass transition temperature of acrylic polymer for $20^{\circ}C$. The composition of MPTS in the synthesized polymer were varied from 10 wt% to 30 wt%. On the basis of synthesized resin amber paints were prepared and their physical properties and effects on weatherability were examined. The presence of MPTS in modified silane acrylic resins generally resulted in low molecular weight and broad molecular weight distribution, and also lowered the viscosity of the copolymers. The coated films prepared from these resins showed good and balanced properties in general. Adhesion to the substrate was outstanding in particular. Weatherability tests were carried out in three different types such as outdoor exposure, QUV, and SWO. The test results showed that the modified silane acrylic resins containing 30 wt% of MPTS had superior weathering properties.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.111-114
• /
• 2006

This paper is to investigate the chemical composition and physical properties of cements collected at different crushing process line of ordinary portland cement to verify the possibility for producing special purpose cement based on the particle distribution technique. According to test results, six different cement samples with different blaine were gathered. loss on ignition and chemical composition of cements gathered were satisfied with KS L 5201. Cement collected at line 5 had the lowest blaine value while cement at line 4 had the highest blaine value. The coarser the cement particle is, the larger the fluidity of cement is. The compressive strength of cement was highly affected by the blaine value of cement. It is confirmed that the use of cement produced by the process of particle distribution control may be applied for special purpose cement without modification of chemical composition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.1-9
• /
• 1996

The aggregates with the different mineralogical features are studied how to affect the basic physical properties of concretes according to the changes of the chemical composition, mineralogical composition, crystal size, the standard qualities in the aggregates in using chemical analysis, X.R.D. DT-TGA, polarized light microscope, streoscopic microscope, standard test method of aggregates & concretes. At this studies, we found that aggregates without the seathered mineral such as muscovite & kaolin mineral etc, is superior to the others with the weathered mineral, even if it's standard qualities are inferiored to the other's. For examples, in manufacturing high strength concretes. The strength of concretes used aggregates without weathered mineral are improved about 15% than the other's and also. For general mixture to manufacture remicon, more about 10-20% than the other's strength and workability.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.645-650
• /
• 2000

Effects of the chemical composition and sintering atmosphere on the formation of reaction phases and physical properties of reactive hot-pressed TiB2-AlN-BN composites were investigated. At N2 atmosphere, TiN was formed by the reaction between Ti and N2, which inhibited the densification and results in inferior mechanical-and electrical properties of the composites. However, at Ar atmosphere, enhanced densification and physical properties of composites were obtained due to that the TiN formation reaction was excluded. Densification of the composites was also hindered by BN, therefore, inferior mechanical-and electrical properties of composites were obtained with amount of BN in the starting materials. At Ar atmosphere, TiB2-AlN-BN composites having 318 MPa of flexural strength, 3.5 MPa.m1/2 of fracture toughness and 276$\mu$Ω.cm of electrical resistivity were fabricated from mole ratio 1:2:1.6 of Ti-Al-BN mixtures.