• 제목/요약/키워드: chemical composition analysis

검색결과 1,479건 처리시간 0.026초

Preparation, Structure, and Photoemission Studies on the High Temperature Superconductor $YBa_2Cu_{3-x}Ni_xO_{7-{\delta}}$

  • Choy, Jin-Ho;Choe, Won-Young
    • Bulletin of the Korean Chemical Society
    • /
    • 제11권5호
    • /
    • pp.379-383
    • /
    • 1990
  • $YBa_2Cu_{3-x}Ni_xO_{7-{\delta}}$, with x = 0.05, 0.2, 0.4, 0.7 and 1.0 had been prepared by the thermal decomposition of corresponding nitrates. Among them, the sample with x = 0.05 shows above-liquid-$N_2$ temperature superconductivity with $T_c$ of 88.7K. According to the X-ray diffraction analysis, its crystal symmetry was estimated as orthorhombic with the lattice parameters of a = 3.866${\AA}$, b = 3.893${\AA}$, c = 11.715${\AA}$. The chemical composition of the sample was determined by electron probe microanalysis and the chemical composition around its grain boundaries was carefully studied by the X-ray line scanning technique. From the observed binding energy of Ni-$2p_{3/2}$ orbital electron (B.E. = 853 eV) measured by X-ray photoelectron spectroscopy, the valency state of nickel stabilized in $YBa_2Cu_{2.95}Ni_{0.05}O_{7-{\delta}}$ oxide lattice could be determined to be Ni(II).

Chemical Composition and Active Antioxidants of Eucommia ulmoides Oliv. Bark

  • Qu, Guan-Zheng;Si, Chuan-Ling;Yin, Yu;Wang, Myeong-Hyeon
    • Nutritional Sciences
    • /
    • 제9권4호
    • /
    • pp.330-334
    • /
    • 2006
  • Chemical composition of the Eucommia ulmoides bark, including extractives, proximate, mineral, fatty acid and monosaccharide compositions, was studied The most abundant mineral was calcium (533.17 mg/l00 g). $\alpha-linolenic$ acid (24.7%) and linoleic acid (24.3%), showed higher contents among the fatty acids. Major monosaccharides of E. ulmoides balk were arabinose (13.94 mg/g), xylose (18.91 mg/g) and glucose (119.7 mg/g). From the bark of E ulmoides, four compounds were isolated and their structures were elucidated as caffeic acid (I), kaempferol (II), quercetin (III) and isoquercitrin (IV) by spectroscopic analysis such as NMR and MS, including cellulose TLC and other chemical evidence such as hydrolyzation and acetylation. The antioxidant activities of four isolated compounds were evaluated by DPPH free radical scavenging, hydroxyl scavenging and reducing power assays. The results indicated that all the isolated compounds showed higher DPPH radical scavenging activity than $\alpha-tocopherol$ and BHT that were used as positive controls and these four compounds exhibited considerable reducing power and hydroxyl radical (OH) scavenging activity. Considering from the results above, it suggests that the E. ulmoides bark is a potential natural source of antioxidant material.

고고 유물에 남겨진 지방의 분석에 대하여 (The Analysis of Organic Residue of Archaeological Evidences)

  • 안병찬;유혜선
    • 보존과학회지
    • /
    • 제4권1호
    • /
    • pp.59-66
    • /
    • 1995
  • The living body consists of proteins, carbohydrates and fats. The above components are unstable to the change of circumstances ; thus ; when they are buried under the ground for a long time, they are disintegrated by physical effects such as pressure, water etc. However, it was recently reported that the part of the components of living body, especially fat thought in small guantity, remained in a relative stable state for many milleniuns. In addition, turned out that the structure of the composition of the fatty acid and sterol is different according to their species. For example, the plants - rice, barley, bean - and the animals - (togs, cow, pig, fish - have different structure of fat. Residual fat analysis is a research in the chemical composition of fat vemained in archaeological evidences on the basis of chemical structural differences as mentioned here in above. This paper introduces the residual fat analysis of archaeological evidences practical in Japan.

  • PDF

1994년 수도권 지역에서의 시정과 미세 입자상물질 화학조성과의 관계해석 (Chemical Composition of Fine Aerosol Associated with Visibility Degradation in Seoul Metropolitan Area in 1994)

  • 한진석;김병곤;김신도
    • 한국대기환경학회지
    • /
    • 제12권4호
    • /
    • pp.377-387
    • /
    • 1996
  • This study was carried out to monitor the visibility including measurement and analysis of the various parameters such as particle size distribution, chemical composition, and meteorotical conditions to understand the characteristics and causes of this phenomenon. According to the analysis of intensive sampling, $SO_4^{2-}, NO-3^-, Cl^-, NH_4^+$ ion concentration increased together with the mass concentration around 1 $\mu$m in the case of low visibility. $(NH_4)_2SO_4, NH_4NO_3$, and $NH_4Cl$ were thought to be the major components of fine particles. The statistical analysis showed that the scattering effect of particle was 81.2%, the absorption effect was 14.9%. Therefore, these effects were the major factors to reduce the visibility. In conclusion, the visibility was reduced by the fine particle of sulfate (18.6%), nitrate (14.2%), organic carbon (10.8%), element carbon (25.8%), and residual (24.8%) during this study.

  • PDF

전기 화학 반응을 포함한 3차원 열유동 해석을 이용한 용융탄산염 연료전지의 성능예측 (Prediction of MCFC Performance Using Three Dimensional Heat and fluid Flow Analysis with Electrochemical Reaction)

  • 조황묵;이경원;최도형
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2003년도 추계 학술대회논문집
    • /
    • pp.219-224
    • /
    • 2003
  • An analysis procedure for the MCFC channel flow has been developed to predict the fuel cell performance. As for the electrochemical reaction, among several chemical reaction models, one that fits the data best is adopted after a comprehensive comparative study. The Wavier-Stokes, energy, and species equations are solved to obtain the velocity, temperature and concentration fields for a specified average current density. The procedure is iterative as the local current density, or the reaction rate, is allowed to vary with the gas composition. A series of calculations are then carried out to examine the effects of gas flow rate, gas composition, gas usage rate, inlet gas temperature, and average current density on the fuel cell performance. The fuel cell characteristics, such as the temperature, current density distributions, and the concentration fields, for various operating conditions are presented and discussed.

  • PDF

유한요소기법을 이용한 고소작업대의 파손된 고정볼트의 피로 파손 분석 (A Fatigue Failure Analysis of Fractured Fixing Bolts of a Mobile Elevating Work Platform using Finite Element Methods)

  • 최동훈;김재훈
    • 한국안전학회지
    • /
    • 제35권5호
    • /
    • pp.1-8
    • /
    • 2020
  • Mobile elevating work platforms (MEWPs) consist of a work platform, extending structure, and chassis, and are used to move persons to working positions. MEWPs are useful but are composed of pieces of equipment, and accidents do occur owing to equipment defects. Among these defects, accidents caused by the fracture of bolts fixed to the extension structure and swing system are increasing. This paper presents a failure analysis of the fixing bolts of MEWP. Standard procedure for failure analysis was employed in this investigation. Visual inspection, chemical analysis, tensile strength measurement, microstructural characterization, fractography analysis by Optical Microscope(OM) and Scanning Electron Microscopy(SEM), and finite element analysis (FEA) were used to analyze the failure of the fixing bolts. Using this failure analysis approach, we found the root cause of failure and proposed a means for solving this type of failure in the future. First, the chemical composition of the fixing bolt is obtained by a spectroscopy chemical analysis method, which determined that the chemical composition matched the required standard. The tensile test showed that the tensile and yield strengths were within the required capacity. The stress analysis was carried out at five different boom angles, and it was determined that the fixing bolt of MEWP can withstand the loads at all the boom angles. The outcomes of the fatigue analysis revealed that the fixing bolt fails before reaching the design requirements. The results of the fatigue analysis showed primarily that the failure of the fixing bolt was due to fatigue. A visual inspection of the fractured section of the fixing bolt also confirmed the fatigue failure. We propose a method to prevent failure of the fixing bolt of the MEWP from four different standpoints: the manufacturer, safety certification authority, safety inspection agency, and owner.

Wood Chemical Compositions of Raru Species Originating from Central Tapanuli, North Sumatra, Indonesia: Effect of Differences in Wood Species and Log Positions

  • ISWANTO, Apri Heri;TARIGAN, Fazilla Oktaviani;SUSILOWATI, Arida;DARWIS, Atmawi;FATRIASARI, Widya
    • Journal of the Korean Wood Science and Technology
    • /
    • 제49권5호
    • /
    • pp.416-429
    • /
    • 2021
  • Raru is a lesser-known plant species originating from North Sumatra, Indonesia. Information on the characteristics is still limited, especially its chemical component. Therefore, this study aims to examine the chemical composition information of Cotylelobium lanceolatum, Cotylelobium melanoxylon, and Vatica pauciflora woods based on their axial log positions (bottom, middle, and top). The wood chemical analysis was performed in terms of the Indonesian National Standard (SNI) method. Furthermore, the analysis measured holocellulose, 𝛼-cellulose, hemicellulose, lignin content, alcohol benzene extractive content, the extractive substance in hot and water, and solubility in NaOH 1%. The results indicated that the species and their log axial positions affected different chemical components, which included 𝛼-cellulose, hemicellulose, and lignin of C. lanceolatum amounting to 41.88%, 19.39%, and 28.68% respectively. Meanwhile, for C. Melanoxylon, they were 42.01%, 21.11%, and 24.76% respectively; and for V. pauciflora wood, they were 42.95%, 23.24%, and 30.11% respectively. The average values of the extractive contents including the solubility in 1: 2 ethanol benzene, NaOH, and hot water for C. lanceolatum, C. melanoxylon, and V. pauciflora wood were (10.58%, 27.62%, 8.13%), (14.54%, 28.22%, 7.82%), and (10.95%, 28.60%, 7.57%) respectively. The wood species had a significant effect on chemical components including lignin, cellulose and hemicellulose, and extractive solubility in cold water. Furthermore, the axial log position had a significant effect on all the parameters of the chemical composition of the wood being tested.

조선시대 상평통보의 성분 조성과 미세조직을 통한 재료학적 특성 연구 (Study on the Materials Characteristics of Sangpyeongtongbo Coins in Joseon Dynasty Using Chemical Compositions and Microstructures)

  • 장수비;조남철;강형태
    • 보존과학회지
    • /
    • 제31권3호
    • /
    • pp.319-330
    • /
    • 2015
  • 주전소와 주전 시기가 다른 상평통보 25점을 확보하여 성분 조성 및 주전 방법을 알아보았다. 상평통보의 성분 분석 결과, 주성분은 Cu, Zn, Pb이며 일부 시료에서는 Sn, Fe가 함유되어 있다. 그러나 각 상평통보의 성분 조성은 일정하지 않으며 편차가 크다. 또한, 주전 시기에 따라 Cu와 Sn은 후대로 갈수록 감소하였고, Zn과 Pb는 전시기에 걸쳐 꾸준히 높게 함유되어 있다. 이러한 성분 함량의 차이는 당시 주전 이익과 관련이 깊은 것으로 판단된다. 미세조직 관찰 결과, 상평통보 25점은 수지상 조직, 입상조직, 미립화 조직 등 다양한 조직 형태가 확인된다. 그러나 열처리나 가공의 흔적이 관찰되지 않아 모두 주조 조직으로 판단되며, 일부 상평통보에 함유된 Sn, Fe 성분과 냉각 속도 차이에 의해 서로 다른 형태의 조직이 성장한 것으로 확인된다.

Characterization of Korean Clays and Pottery by Neutron Activation Analysis(II). Characterization of Korean Potsherds

  • Lee, Chul;Kwun, Oh-Cheun;Kim, Seung-Won;Lee, Ihn-Chong;Kim, Nak-Bae
    • Bulletin of the Korean Chemical Society
    • /
    • 제7권5호
    • /
    • pp.347-353
    • /
    • 1986
  • Fisher's discriminant method has been applied to the problem of the classification of Korean potsherds, using their elemental composition as analyzed by neutron activation analysis. A combination of analytical data by means of statistical linear discriminant analysis has resulted in removal of redundant variables, optimal linear combination of meaningful variables and formulation of classification rules.

Classification of 31 Korean Wheat (Triticum aestivum L.) Cultivars Based on the Chemical Compositions

  • Choi, Induck;Kang, Chon-Sik;Lee, Choon-Kee;Kim, Sun-Lim
    • Preventive Nutrition and Food Science
    • /
    • 제21권4호
    • /
    • pp.393-397
    • /
    • 2016
  • Whole grain wheat flour (WGWF) is the entire grain (bran, endosperm, and germ) milled to make flour. The WGWF of 31 Korean wheat (Triticum aestivum L.) cultivars were analyzed for the chemical compositions, and classified into groups by hierarchical cluster analysis (HCL). The average composition values showed a substantial variation among wheat varieties due to different wheat varieties. Wheat cv. Shinmichal1 (waxy wheat) had the highest ash, lipid, and total dietary fiber contents of 1.76, 3.14, and 15.49 g/100 g, respectively. Using HCL efficiently classified wheat cultivars into 7 clusters. Namhae, Sukang, Gobun, and Joeun contained higher protein values (12.88%) and dietary fiber (13.74 %). Regarding multi-trait crop breeding, the variation in chemical compositions found between the clusters might be attributed to wheat genotypes, which was an important factor in accumulating those chemicals in wheat grains. Thus, once wheat cultivars with agronomic characteristics were identified, those properties might be included in the breeding process to develop a new variety of wheat with the trait.