• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.771-777
• /
• 2017

Carbon nano tubes (CNTs)를 흡착제로 사용하여 회분식 실험을 통해 염료 Eosin Y의 흡착특성을 조사하였다. 본 연구에 사용된 CNTs는 비표면적이 $106.9m^2/g$, 기공부피는 $1.806cm^3/g$, 기공직경은 $163.2{\AA}$이었다. CNTs를 이용한 Eosin Y의 흡착실험은 흡착시간, 초기 pH (2~10), 염료 농도(100, 150 및 200 mg/L), 흡착제의 양(0.05~1.0 g)과 온도(293, 313 및 333 K)를 변수로 사용하여 수행하였다. 흡착은 pH와 온도가 낮을수록 잘 이루어졌으며, Langmuir 모델식에 잘 적용되었다. 또한 흡착반응은 유사 2차 속도식에 잘 적용되었으며, 온도가 증가함에 따라 흡착량이 감소하였다. 입자 내 확산 모델 결과는 흡착 과정에서 막확산과 입자확산이 동시에 일어나는 것을 시사해 주었다. 열역학적 해석에 의하면 CNTs에 의한 염료 Eosin Y의 흡착은 자발적이고 흡열특성을 보였다.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.219-224
• /
• 2019

본 연구에서는 흡착공정에 의한 Taxus chinensis 유래 세팔로마닌의 효율적 분리를 위하여, 흡착 온도, 흡착 시간 및 초기 세팔로마닌 농도를 달리하여 상용흡착제 실로퓨트에 의한 세팔로마닌의 흡착 특성을 조사하였다. 흡착 평형 데이터는 Temkin 흡착등온식에 가장 적합하였다. 흡착 온도가 증가함에 따라 흡착 용량은 감소하였으며, 물리적 흡착 공정임을 알 수 있었다. 속도론적 데이터는 유사 이차 반응속도식에 적합하였다. 입자 내 확산 모델에 의하면, 필름 확산과 입자 내 확산은 전체 흡착 속도에 거의 영향을 미치지 않았다. 열역학적 데이터를 통해 흡착 과정은 발열 반응이며 자발적이었다. 또한 흡착량이 증가함에 따라 등량흡착열은 거의 변화가 없었으며 흡착제의 표면 에너지가 균일함을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2560-2564
• /
• 2011

Mesoporous silicon dioxide (meso-$SiO_2$) was prepared using cetyltrimethylammonium bromide as the structure-directing reagent and tetraethyl orthosicate as the silicon source. The influence of pH value on the adsorption behavior of bisphenol A (BPA) was investigated. The adsorption capacity of BPA onto meso-$SiO_2$ increases slightly with pH value from 2 to 6, and then gradually decreases as further improving pH value. The effect of temperature was also studied, and the adsorption capacity of BPA gradually declines with increasing temperature. The adsorption kinetics and thermodynamics of BPA were examined. It is found that the adsorption of BPA onto meso-$SiO_2$ is in good agreement with Langmuir adsorption model. The rate constant of adsorption is $5.17{\times}10^{-3}g\;mg^{-1}\;min^{-1}$, and the maximum adsorption capacity is as high as 353.4 $mg\;g^{-1}$ at 20 $^{\circ}C$.

• Korean Chemical Engineering Research
• /
• 제51권2호
• /
• pp.233-239
• /
• 2013

Poly(isobutylene), polystyrene 및 poly(methyl methacrylate)로 코팅된 quartz crystal microbalance(QCM) 시스템을 구성하여, 매우 낮은 압력에서 benzene, toluene, p-xylene의 흡착량을 측정하였다. 모든 흡착실험에서 QCM 시스템의 공진 주파수 변화는 압력의 증가에 비례하였다. 실험결과로부터 각각의 고분자 필름에 대한 흡착물질의 Henry 상수를 구하였으며 고분자 필름과 흡착물질 사이의 최소 흡착 포텐셜 에너지와 비교하였다. 전체적으로 흡착량과 최소 흡착 포텐셜 에너지는 명백한 상관관계가 있었다.

• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.127-130
• /
• 2015

본 연구에서는 활성탄을 흡착제로 사용하여 아세트산의 흡착 평형 실험을 313.15, 323.15 K에서 수행하였다. 아세트산의 흡착평형 데이터를 Langmuir, Bi-Langmuir, Freundlich model로부터의 계산 결과와 비교하였다. 이 과정에서 각 model 내 isotherm parameter는 실험값과 계산값의 차이의 제곱의 합을 최소화하는 방식으로 결정하였다. 비교 결과 활성탄상에서의 아세트산의 흡착평형 데이터를 가장 잘 설명해주는 model은 Bi-Langmuir model이었음을 확인하였다.

• Environmental Engineering Research
• /
• 제24권4호
• /
• pp.600-607
• /
• 2019

Volatile organic compounds (VOCs) are released from various sources and are unsafe for human health. Porous materials are promising candidates for the adsorption of VOCs owing to their increased ratio of surface area to volume. In this study, activated carbon (AC) impregnated cellulose acetate (CA) electrospun mats were synthesized using electrospinning for the removal of VOCs from the air mixture of ACs, and CA solution was electrospun at different proportions (5%, 10%, and 15%) in a single nozzle system. The different AC amounts in the electrospun mats were distributed within the AC fibers. The adsorption capacities were measured for acetone, benzene, and dichloromethane, using quartz crystal microbalance. The results elicited an increasing adsorption capacity trend as a function of the impregnation of ACs in the electrospun mats, while their capacities increased as a function of the AC concentration. Dichloromethane resulted in a faster adsorption process than acetone and benzene owing to its smaller molecular size. VOCs were desorbed with the N₂ gas purging, while VOCs were adsorbed at higher temperatures owing to the increased vapor pressures. The adsorption analysis using Dubinin-Astakhov equation showed that dichloromethane is more strongly adsorbed on mats.

• 한국환경과학회지
• /
• 제15권7호
• /
• pp.695-699
• /
• 2006

This study is to investigate the relationship between pore structures of activated carbons and adsorption characteristics of toluene vapor using dynamic adsorption method. The surface areas of below $10{\AA}$ in the pore diameter of activated carbons used in this experiment were in the range of 72 -93 % of total cumulative surface area and the toluene vapor equilibrium adsorption capacities were in the range of 350 - 390mg/g. Activated carbons having larger toluene adsorption capacity than the compared activated carbons had relatively pores in the pore diameter range of $7-10{\AA}$. Linear relationship between equilibrium adsorption capacity and cumulative sur- face area was in the diameter range of over $7{\AA}$. It was thought that toluene vapor was relatively well adsorbed on surfaces of pores of over $7{\AA}$.

• Advances in environmental research
• /
• 제4권2호
• /
• pp.119-133
• /
• 2015

Water pollution means that the physical, chemical and biological properties of water are changing. In this study, adsorption was chosen as the treatment method because it is an eco-friendly and low cost approach. Magnetite is a magnetic material that can synthesize chemical precipitation. Magnetite was used for the removal of copper in artificial water samples. For this purpose, metal removal from water dependent on the pH, initial concentration of metal, amount of adsorbent and effect of sorption time were investigated. Magnetite was characterized using XRD, SEM and particle size distribution. The copper ions were determined by atomic absorption spectrometry. The adsorption of copper on the magnetite was studied in a batch process, with different aqueous solutions of Cu (II) at concentrations ranging from 10 to $50mg\;l^{-1}$. Optimum conditions for using magnetite were found to be concentration of $10mg\;L^{-1}$, pH: 4.5, contact time: 40 min. Optimum adsorbent was found to be 0.3 gr. Furthermore, adsorption isotherm data were analyzed using the Langmuir and Freundlich equations. The adsorption data fitted well with the Freundlich ($r^2=0.9701$) and Langmuir isotherm ($r^2=0.9711$) equations. Kinetic and equilibrium aspects of the adsorption process were studied. The time-dependent Cu (II) adsorption data were described well by a pseudo-second-order kinetic model.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2009년도 추계학술발표회 논문집
• /
• pp.79-84
• /
• 2009

Understanding the polymer adsorption in particle/binder/solvent system is important to achieve successful film products. While most of the reported work has dealt with the suspension microstructure, a few studies have focused on film formation. We investigated the effect of adsorption on film formation through measurement of adsorption amount in suspension and stress development in drying film with respect to mixing time ($t_m$). All of the adsorption amount (PVA), characteristic stress ($\sigma_{ch}$) exhibited similarities expressed by the form of $1-e^{t_m/{\tau}}$. The porous and non-unifonn dried film at short tm became close-packed and uniform with longer $t_m$. We found that polymer adsorption plays the key role in film fonnation as it introduces steric repulsion in suspension and suppresses the flocculation during solvent evaporation. We also found that the mixing time for the saturated polymer adsorption is the important variable to acquire the consolidated and uniform film microstructure.

• Carbon letters
• /
• 제5권4호
• /
• pp.170-179
• /
• 2004

The equilibrium and dynamic adsorption of methylene blue from aqueous solutions by activated carbons have been studied. The equilibrium studies have been carried out on two samples of activated carbon fibres and two samples of granulated activated carbons. These activated carbons have different BET surface areas and are associated with varying amounts of carbon oxygen surface groups. The amounts of these surface groups was enhanced by oxidation with $HNO_3$ and $O_2$ gas at $350^{\circ}C$ and decreased by degassing at increasing temperatures of $400^{\circ}$, $650^{\circ}$ and $950^{\circ}C$. The adsorption increases on oxidation of the carbon surface and decreases on degassing. The increase in adsorption has been attributed to the formation of acidic carbon-oxygen surface groups and the decrease in adsorption on degassing to their elimination. The dynamic adsorption studies have been carried out on the two granulated activated carbons using two 50 mm diameter glass columns at a feed concentration of 300 mg/L and at different hydraulic loading rates (HLR) and bed heights. The minimum achievable concentrations are comparatively lower while the adsorption capacities are higher for GAC-S under the same operating conditions. The adsorption capacity of a carbon increases with increase in HLR but the rate of increase decreases at higher HLR values.