• 인지과학
• /
• 제3권2호
• /
• pp.311-328
• /
• 1992

인간이나 기계변역기에 의해 생성되는 영어 문장은 이들이 가지고 있는 동사사전의 내용과 효율적인 생성 알고리즘에 의해서 문장의 수준이나 정확성이 결정된다.이렇게 생성된 문장을 검사하는 기존의 영어 문법검사기들은 문자의 문형을 결정하는 중요한 요소인 동사형이나 문법적인 중요한 규정들을 포함하지 않고 있어서 비영어권의 사용자가 이용하기에는 부적절하다.본 논문에서는 인간이 번역하였거나 기계 번역기에 의해 생성된 문자을 검사하고 교정할 수 있도록,확장 동사형을 기반으로 한 동사 사전을 제안하고 이를 이용하여 영어 문장의 검사에 적용하는 방안에 대해 연구한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1391-1394
• /
• 2007

In order for Hypoid gear development. Gears are required to sustain heavy loads or on applications where the gear box is made or a material with a different coefficient of thermal expansion form that or the gears and shafts, it is desirable to make a deflection and contact check under load. The deflection test is performed in the actual gear mounting using completely processed gear. This test should cover the full operating range of gear loads from no load to peak load. Under peak load the contact pattern should extend to the tooth boundaries without showing a concentration of the contact pattern at any point on the tooth surface.

• 한국컴퓨터정보학회논문지
• /
• 제23권7호
• /
• pp.39-47
• /
• 2018

This paper confirms the risk of using smartphone through the analysis of collected usage pattern and proposes the smartphone intervention system in risk situations. In order to check the risk of smartphone usage, we made information collecting application and collected smartphone usage pattern from 11 experiment participants for two months. By analyzing smartphone usage pattern, we confirmed that about 12% of smartphone usage is being used in driving, walking, and on the street. In addition, we analyzed the response rate of smartphone notification in risk situations and confirmed that user responds the smartphone notifications in real-time even in risk situations. Therefore, it is required to present a system that intervenes the use of smartphone in order to protect smartphone users in risk situations. In this paper, we classify risk situations of using smartphone. Also, the proposed smartphone intervention system is designed to periodically detect risk situations. In risk situations, smartphone function can be restricted according to user setting of smartphone. And smartphone can be used normally when safe situation is restored.

• Journal of Communications and Networks
• /
• 제2권1호
• /
• pp.69-75
• /
• 2000

A new frame synchronization confirmation technique using a pilot pattern of both uplink and downlink channels is proposed for W-CDMA (Wideband Code Division Multiple Access) system. It is shown that by using this technique, we can cancel the side lobe for autocorrelation functions of the frame synchronization words of pilot pattern have the maximum to-of-phase autocorrelation value "4" with two peak values equal in magnitude and opposite in polarity at zero and middle shifts. Due to this side lobe cancellation effect, therefore, the autocorrelation function of the frame synchronization words becomes ideal for the frame synchronization confirmation since double maximum correlation values equal in magnitude and opposite polarity at zero ad middle shifts can be achieved. This property can be used to double check frame synchronization timing and thus. improve the frame synchronization confirmation performance.

• 한국전자통신학회논문지
• /
• 제7권2호
• /
• pp.317-325
• /
• 2012

본 논문에서 우리는 LDPC 부호의 부호화 문제를 고려한다. 특히 재킷 패턴과 순환 치환 행렬을 사용함으로써 리차드슨의 하삼각 행렬과 유사한 간단한 LDPC 부호를 제안한다. 이 부호화 기법은 다양한 부호율을 갖도록 확장할 수 있다. 또한 단순한 행렬 처리에 근거하여 다양한 부호율을 갖는 복잡도가 낮고 간단한 부호기를 설계할 수 있다.

• 대한가정학회지
• /
• 제39권10호
• /
• pp.29-37
• /
• 2001

The purpose of this study is to investigate the preference and the use of the bedclothes. The data were obtained from market research of 12 department stores which were located in Seoul, Daegu and Busan, and from questionnaires completed by 356 women in Daegu area whose age was 20 years and older. The SPSS package was used for data analysis which includes frequency, percentage, $X^2$test, ANOVA, and Scheffe test. Cotton was the most popular fiber for coverings and fillings. Color preference was in the order of pastel, non-chromatic, vivid, and white color and pattern preference was in order of floral, check, and stripe pattern. Practicality, color and fabric were the most important factors and price was the most unsatisfied factor when bedclothes were purchased. Also, information for bedclothes was obtained mainly through internet shopping, home shopping or catalog shopping.

• Applied Science and Convergence Technology
• /
• 제23권5호
• /
• pp.254-260
• /
• 2014

Organic solar cells have attracted extensive attention as a promising approach for cost-effective photovoltaic devices. However, organic solar cell has disadvantage of low power conversion efficiency in comparison with other type of solar cell, due to the recombination ratio of hole and electron is too large in the active layer. Thus we have change the surface structure of PEDOT:PSS layers to improve the current density by colloidal lithography method using various-size of polystyrene sphere. The two types of coating method were applied to fabricate the different pattern shape and height, such as spin coating and drop casting. Using the organic solvent, we easily eliminate the PS sphere and could make the varied pattern shapes by controlling the wet etching time. Also we have measured the electrical properties of patterned PEDOT:PSS film to check whether it is suitable for organic photovoltaics.

• PNF and Movement
• /
• 제18권2호
• /
• pp.255-263
• /
• 2020

Purpose: The purpose of this study was to investigate the effect of proprioceptive neuromuscular facilitation (PNF) lower extremity pattern on the dominant leg on muscle activity of the lower extremity supported by the ground. Methods: The subjects were 20 healthy males living in Busan. All subjects performed four direction PNF lower extremity patterns, and data were collected by surface electromyography from the gluteus medius (GM), tensor fascia latae (TFL), vastus medialis oblique (VMO), vastus lateralis oblique (VLO), and semitendinosus (STD) muscles of the opposite lower extremity during PNF lower extremity pattern. The PNF lower extremity pattern applied to the dominant leg was (1) flexion/adduction/external rotation with knee flexion; (2) extension/abduction/internal rotation with knee extension; (3) flexion/abduction/internal rotation with knee flexion; and (4) extension/adduction/external rotation with knee extension pattern, repeated 3 times per pattern and using the average value of the collected results. Collected muscle activity values were analyzed by one-way ANOVA, and post-hoc Tukey testing was performed to check between-group differences. The statistical significance level was set at α = 0.05. Results: GM and TFL flexion/abduction/internal rotation pattern with knee flexion was significantly higher than other patterns. VMO and VLO extension/adduction/external rotation pattern with knee extension was significantly higher than other patterns. STD flexion/adduction/external rotation pattern with knee flexion was significantly higher than other patterns. Conclusion: The study confirms differences in lower extremity muscle activity for the PNF lower extremity pattern, indicating that selective muscle contraction induction is possible using a pattern appropriate to the purpose of treatment.

• 서비스연구
• /
• 제9권2호
• /
• pp.31-40
• /
• 2019

본 논문은 빅데이터, 사물인터넷, 인공지능 등 정보기술의 발전과 더불어 더욱 중요해진 정보시스템의 비즈니스 연속성 증대를 위한 운영감리 개선에 관하여 연구하였다. 다양한 서비스와 데이터 그리고 산업이 융합되는 4차 산업시대에 도래하고 있는 현재 정보시스템의 운영관리와 감리지침은 기존의 범용적 정보시스템 패턴에 근거해 대응하고 있어 이에 대한 개선이 요구된다. 정해진 시간에 정해진 서비스의 제공이 기업 및 국가의 생존과 연결되고 핵심 요소로 작용하고 있으므로 비즈니스 연속성 관리차원에서 정보시스템의 서비스 중단 피해를 최소화하고 안정된 서비스 수준을 제공하기 위한 운염감리의 최적화된 방향성과 점검항목을 적용하는 연구가 필요하다. 이를 위해 정보시스템의 운영감리에서 제시하는 점검항목을 ISO 22301에서 제공하는 PDCA 단계별 내용과 8대 자원 요구사항을 접목하여 도출하였다. 점검항목의 도출기준에 따라 비즈니스 연속성 증대 관점에서 정보시스템 운영감리의 개선된 점검항목과 검토항목 그리고 운영감리 중 점검해야 할 산출물을 예시로 운영감리 점검항목을 도출하였다. 점검항목으로는 서비스 연속성 관리를 위한 운영감리 개선 점검항목과 성능, 가용성 관리를 위한 운영감리 개선 점검항목으로 구분하여 제안하였다. 제안한 점검항목의 적합성에 대한 IT전문가들의 5점 척도 설문 결과 평균 4.63으로 나타나 적합하다는 결론이 도출되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.364-367
• /
• 2007

In nano-imprint lithography (NIL) process, which has shown to be a good method to fabricate polymeric patterns, several kinds of pattern defects due to thermal effects during polymer flow and mold release operation have been reported. A typical defect in NIL process with high aspect ratio and low resist thickness pattern is a resist fracture during the mold release operation. It seems due to interfacial adhesion between polymer and mold. However, in the present investigation, FEM simulation of NIL molding process was carried out to predict the defects of the polymer pattern and to optimize the process by FEA. The embossing operation in NIL process was investigated in detail by FEM. From the analytical results, it was found that the lateral flow of polymer resin and the applied pressure in the embossing operation induce the weld line and the drastic lateral strain at the edge of pattern. It was also shown that the low polymer-thickness result in the delamination of polymer from the substrate. It seems that the above phenomena cause the defects of the final polymer pattern. To reduce the defect, it is important to check the initial resin thickness.