• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.7-13
• /
• 1985

Design techniques for programmable storage/logic arrays(SLA's) with easily testable features are discussed. The easily testable SLA's will be designed by using additional hardware to provide an easy means to set or check the states. These augmented SLA's have the very short universal test sequences such that the test patterns and responses are uniquely determined only by the size of the SLA's independently of the function of them. The types of faluts considered here are single and multiple stuck faults, crosspoint faults, and bridge faults in SLA's. Fault location and reapir of SLA's are also considered.

• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.398-413
• /
• 2016

This work describes the design and development of a new drying system for a rollover carwash machine with the support of numerical tools. The drying system is composed of a pair of stationary vertical dryers and a moveable horizontal dryer that can adjust itself to the contour of a vehicle. After the definition of the dryers' concept, their performance was assessed individually to check their internal flow pattern and to improve their airflow distribution. These issues are expected to provide feedback on redesign and geometric optimization of the dryers. After redesign of the dryers separately, the behaviour of the complete drying system was studied on actual vehicle models, representative of the shortest and tallest dimensions that can be washed with the existing carwash machine sector. The drying efficiency of the whole system was studied by calculation of shear stress distribution on various surfaces of a given vehicle. The results allowed concluding that the overall drying performance of the design system is very good and assure adequate drying on most vehicles surfaces. The results obtained from numerical studies were then validated with experimental measurements and a good agreement was found between the two. The procedure employed in this work can be applied to support the design and analysis of other mechanical drying systems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.681-687
• /
• 2017

This paper presents about an implementation of Video Transmitting and Receiving System(VTRS) for acquiring test data. The VTRS consists of two parts. The first is Transmitter Unit(TU) that is installed on a missile to acquire various kinds of data and transmit the data to the ground through RF signals. The second is Receiver Unit(RU) that receives the transmitted RF signals and reconstruct those to the original data. To gather a high speed data reliably and securely on the ground, the TU is designed by considering data transfer scheme, data compression, modulation method, encryption technic, link budget, and antenna radiation pattern. Further, a placement method of multiple receiving stations is suggested. The VTRS has been tested on a field to check the link margins and maximum receiving distance in a real environment. Finally, the VTRS is applied to a missile flight test and gathered high speed data reliably.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.8
• /
• pp.720-723
• /
• 2005

We studied the quantitativity of the image sticking which is occured by the resicual DC in the fringe-electric field switching (FFS) mode. Actually, in the FFS mode driven by the strong fringe electric field, the asymmetric residual DC was formed in the bottom substrate. It made the impurity ion stick to the alignment layer such as polyimde layer. Thus, the differnece of the luminance existes after the stress check pattern is applied to the panel so that we can see the image sticking. This image sticking decreases as the residual DC value between specific patterns decreases. Therefore, it is necessary to control the residual DC for the FFS mode with the high image quality. It is possible to eliminate the image stiking when the extra pixel voltage is applied through the circuit tunning for reducing the difference of residual DC accroding to the panel position.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.238-243
• /
• 2013

This paper analyzes a virtual work of the knee and hip joints of bipedal walking robots. For the purpose, we consider a model of bipedal leg mechanism with a compliant foot and a typical walking pattern. We also check the torque characteristics at the joint space propagated from the space of the foot contacting a flat and stiff surface, and present the works accumulated at the joint space. As a result, it is shown that this analysis is useful for evaluating the fatigue of the leg mechanism by the physical walking contact between the foot and the surface, and it is applicable for improving the compliant characteristics at the foot space by employing a proper footgear.

• Korea-Australia Rheology Journal
• /
• v.18 no.2
• /
• pp.109-118
• /
• 2006

A finite-element method was employed to analyze axisymmetric unsteady motion of a deformable bubble near the wall. In the present study a deformable bubble in a Newtonian medium near the wall was considered. In solving the governing equations a structured mesh generator was used to describe the collapse of highly deformed bubbles with the Arbitrary Lagrangian Eulerian (ALE) method being employed in order to capture the transient bubble boundary effectively. In order to check the accuracy of the present FE analysis we compared the results of our FE solutions with the result of the collapse of spherical bubbles in a large body of fluid in which solutions can be obtained using a 1D FE analysis. It has been found that 1D and 2D bubble deformations are in good agreement for spherically symmetric problems confirming the validity of the numerical code. Non-spherically symmetric problems were also solved for the collapse of bubble located near a plane solid wall. We have shown that a microjet develops at the bubble boundary away from the wall as already observed experimentally. We have discussed the effect of Reynolds number and distance of the bubble center from the wall on the transient collapse pattern of bubble.

• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.70-78
• /
• 2016

This paper aims to describe a case study of parametric interior design based on BIM (Building Information Modeling). As the practical use of BIM-based design grows, its influence expands into the field of interior architecture design. BIM makes possible to check various design plan, reach decision making in an effective way, and change design plan in an efficient method. Therefore, BIM is also promising field in interior architecture design. However, compared to other fields in architecture, engineering, and construction (AEC) industry, there have been less research and projects on BIM in the field of interior architecture. For increasing the feasibility of adapting BIM in interior architecture design, this paper describes a case study-projecting images for designing interior panels using parametric modeling. This process needs elaborate, delicate, and precise steps for harmonious output. For continuous use of building, users look forward to the design which variable and changeable according to user's preference and environment. Therefore, demand for parametric design in the interior design part such as panel pattern design for various decoration is growing. Treated process in this paper deals with an advanced phase which much effective in decreasing time consumption and useless part of process. Finally, this paper suggests the possibility of using BIM in the interior design process and field where BIM can be applied.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.215-221
• /
• 2017

An electromagnetic (EM) wave absorber reduces the possibility of radar detection by minimizing the radar cross section (RCS) of structures. In this study, a radar absorbing structure (RAS) was applied to the leading edge of a blended wing body aircraft to reduce RCS in X-band (8.2~12.4GHz) radar. The RAS was composed of a periodic pattern resistive sheet with conductive lossy material and glass-fiber/epoxy composite as a spacer. The applied RAS is a multifunctional composite structure which has both electromagnetic (EM) wave absorbing ability and load-bearing ability. A two dimensional unit absorber was designed first in a flat-plate shape, and then the fabricated leading edge structure incorporating the above RAS was investigated, using simulated and free-space measured reflection loss data from the flat-plate absorber. The leading edge was implemented on the aircraft, and its RCS was measured with respect to various azimuth angles in both polarizations (VV and HH). The RCS reduction effect of the RAS was evaluated in comparison with a leading edge of carbon fabric reinforced plastics (CFRP). The designed leading edge structure was examined through static structural analysis for various aircraft load cases to check structural integrity in terms of margin of safety. The mechanical and structural characteristics of CFRP, RAS and CFRP with RAM structures were also discussed in terms of their weight.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.3
• /
• pp.101-110
• /
• 1997

The purpose of this study was on suggesting what is the image and image formation factor of interior landscaping plants. For this purpose, the sixty interior landscaping plants were selected. Selected plants were classified into 9 groups by similar characteristics of plants, for example, leaf color and leaf pattern. Data analysis were performed by semantic differential scale method, mean score and multiple regression algorithm. The results are as follows, 1. Comparing with image assessment, group 9 got the highest score in all aspects. 2. Comparing with the image assessment of interior landscaping plants, the "impressive" image was obtained the highest score and "bright", "cool", "beautiful" and "fresh" were followed. 3. Multiple regression analysis was performed to clarify influence degree of the adjectives related to the beauty. The next adjectives were significant check points on assessing the beauty of interior landscaping plants. Also, Guzmania magnifical was investigated to have the most beautiful image with the results of preference analysis. Vriesea splendens, Cordyline terminalis Kunth 'Lilliput' and Peperomia sandersii were identified as considerably preferred plants. were identified as considerably preferred plants.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.46-49
• /
• 1998

In this paper, we introduce the notion of intelligent communication by introducing a novel intelligent receiver model. This receiver is continually evolving and learns and improves in performance as it compiles its experience over time. In digital communication context, in a typical training mode, it jearns the concept of "1" as is deteriorated by arbitrary (not necessarily additive as is typically assumed) disturbance and /or modulation. After learning "1", in test mode, it classifies the received signal "1" and "0" almost completely. The intelligent receiver as implemented is grounded on the recently introduced Stochastic Morphological Sampling Theorem(SMST), a distribution-free result which gives theoretical bounds on the sample complexity(training size) needed for the required performance parameters such as accuracy($\varepsilon$) and confidence($\delta$). Based on this theorem, we demonstrate --almost irrespective of channel and modulation model-- the number of samples needed to learn the concept of "1" is not too "large" and the resulting universal receiver structure, that corresponding to classical Nearest Neighbor rule in Pattern Recognition Theory, is trivial. We check the surprising efficiency and validity of this model through some simple simulations. and validity of this model through some simple simulations.