• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.4
• /
• pp.344-349
• /
• 2005

The optical and electrical characteristics of plasma display panel(PDP) using the vacuum in-line sealing technology compared with the conventional sealing process in this research. This PDP consisted of MgO protecting layer by e-beam evaporation and battier rib, transparent dielectric layer, dielectric layer, and electrodes by screen printer and then sealed off on Ne-Xe(4 ％) 400 Torr and 430。C. The brightness and luminous efficiency were good as the base vacuum level was higher, and it was to check the advantage of high vacuum level sealing, one of the strong points of the vacuum in-line sealing process. However, the brightness and luminous efficiency was dropped sharply because of a crack on MgO protecting layer by the difference of the expansion and contraction stress on high temperature in the vacuum states between MgO and substrate. Fortunately, the crack was prevented by MgO was deposited on higher temperature than 300。C. Finally, the PDP, was fabricated by the vacuum in-line sealing process, resulted the lower brightness than processing only the thermal annealing treatment in the vacuum chamber, but the luminous efficiency was increased by the reducing power consumption with the decreasing luminous current. The vacuum in-line sealing technology was not to need the additional thermal annealing process and could reduce the fabrication process and bring the excellent optical and electrical properties without the crack of MgO protecting layer than the conventional sealing process.

• Journal of the Korean housing association
• /
• v.21 no.3
• /
• pp.95-104
• /
• 2010

The purpose of this study was to found that the important design reform points for improvement of the public open space quality. For this purpose, surveyed the users of the public open space and the experts working for the public open space planning for the design elements of the public open spaces in terms of importance and satisfaction. The scope of the study was limited to Mapo-gu, Seoul and the buildings constructed since 1992 were sampled. the data collected were subject to Importance-Performance Analysis. As a result, 'waste boxes, vending machines and other amenities', 'characteristic floor and pedestrian environment', 'designs and their layout in harmony with the surrounding and landscape facilities', 'facilities checking and patrol for safety' and 'entire area of the public open space'. Based on the above findings, the following reform measures are put forwards for improvement of the public open space quality; First, the public open spaces should be equipped with sufficient amenities. Second, it is necessary to check the facilities regularly, while enhancing the safety through patrols. Third, it is essential to reflect user's needs in public open space planning, while applying the important design elements to the public facilities. Fourth, in order to create a comfortable pedestrian environment within the public open space, it is deemed necessary to divide the space into the passages for passers-by and the recesses for uses. Fifth, it is necessary to amend the Building Code to the effects that the radio of the landscaped area to the entire area can be readjusted together with the night lighting facilities. Sixth, it is desirable to give the weights to the important design elements for the public open spaces, so that the quality public open spaces can benefit from the incentives. In addition, regular maintenance and management should be ensured by policies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.136-146
• /
• 2013

Truck demand analysis based on TCS data has limitation in that TCS data can not provide truck O/D data for each type of truck vehicle. This study conducted video survey for classifying truck vehicle types. By using TCS data and vehicle ratio by region/cities type, truck O/D data on expressway were estimated. It was found that average travel distances of small truck, medium truck and large truck were 52km/veh, 56km/veh and 97km/veh, respectively by analysing truck O/D data estimated in this study. The reliability analysis showed that check points where error rate is lower than 30% comprise of 87.3%. It is considered that estimated O/D data by truck vehicle types would be useful for the analysis of truck demand of expressway.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1592-1602
• /
• 1990

Mixed mode surface crack in finite-width plate subjected to uniform tension and bending has been analyzed in 3-D problem by using boundary element method. The calculations were carried out for the surface crack angles(.a/pha.) of 0.deg., 15.deg., 30.deg., 45.deg., 60.deg., and 75.deg., and for the aspect ratio(a/c) of 0.2, 0.4, 0.6 and 1.0 to get stress intensity factors at the boundary points of the surface crack. For the aspect ratio of 1.0 and the surface crack angles, finite element method was used to check the results in this study. Comparison of the results from both methods showed good agreement.

• Journal of Internet Computing and Services
• /
• v.21 no.1
• /
• pp.211-219
• /
• 2020

One of the major advancements of the Fourth Industrial Revolution is the use of Internet of Drones (IoD), which combines the Internet of Things (IoT) and drone technology. IoD technology is especially important for efficiently and economically operating C4ISR operations in actual battlefields supporting various combat situations. The purpose of this study is to solve the problems of limited battery capacity of drones and lack of budgeting criteria for military drone transcription, introduction, and operation. If the mission area is defined and corresponding multi-drone hovering check points and mission completion time limits are set, then an energy and time co-optimized scheduling and operation control scheme is needed. Because such a scheme does not exist, in this paper, a Drone Force Deployment Optimization (DFDO) scheme is proposed to help schedule multi-drone operation scheduling and networked based remote multi-drone control.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.84-91
• /
• 2016

In case of fire, vertically and intensively loaded rack warehouses are faced with a severe status due to the rapid increase in fires. In this regard, there have been trials to prevent fires from spreading by applying fire extinguishing systems, such as ESFR and In-Rack Sprinklers, vertical and horizontal barriers, etc.; however, it is difficult to calculate and design proper fire extinguishing systems caused by various composition conditions, such as the size and loading density of the rack, types of loading commodities, etc. Therefore, in this study, a standard rack was manufactured, incorporating a rack warehouse in Korea by site investigations, surveys, etc. In addition, a full scale fire test was executed to check the fire characteristics depending on the conditions of the ignition points. As a result, the extracted fire spread speed is expected to be utilized as a reference for performance comparisons of the fire extinguishing systems to be developed and applied in the future.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.317-330
• /
• 2008

In this paper, the acquisition of digital imagery and the orthoimage generation were performed to set up working process. And another purpose of this thesis is to evaluate the accuracy of orthoimage by overlapping digital topographic map and digital cadastral map on it. The digital topographic map and digital cadastral map were superimposed on the orthoimage to check the accuracy as another approach of evaluation. The RMSE is ${\pm}0.364m$ in X direction and ${\pm}0.413m$ in Y direction with digital topographical maps(1/5,000). And the RMSE is ${\pm}1.283m$ in X direction and ${\pm}1.085m$ in Y direction with digital cadastral map. It is necessary for the application of a newly developed digital aerial camera to make an exact synchronization between GPS/IMU data and image data, use a technology for setting a standard image resolution and the number of ground control points.

• Korean journal of food and cookery science
• /
• v.23 no.3 s.99
• /
• pp.378-387
• /
• 2007

In this study, we investigated the application of HACCP for a prepared side dish of sweet potato stems, within a free meal service system for the elderly in the Sungnam area. Total bacterial counts (TBC) and levels of coliforms and Esherichia coli (E.coli) were analyzed through an eight step cooking process. The TBCs of the raw samples ranged between 3.30 and 1.37${\times}10^4$ CFU/g per 100 cm$^2$ The trimmed, blanched, and drained sweet potato stems showed a mean TBC value of 1.37${\times}10^4$ CFU/g, and the level of coliforms was 1.48${\times}10^3$ CFU/g. Among the eight samples, however, after stir-frying and serving, the TBC decreased to a standard satisfactory level, and a coliforms and E. coli were not found. A five step process was used and samples were taken to check the microbial quality of the cook and cooking equipment. Here we tested for TBC, coliforms, Staphylococcus aureus (S. aureus), and Salmonella. Specifically, the TBC and number of coliforms were examined on the cook's hand's, cutting board, and knife, as they represented hazards for cross-contamination. The three inspection steps of preparation of the trimmed, rinsed, blanched, and drained sweet potato stems, cook's' hands, cutting board and knife were all considered CCPs, and a manual of cooking process management was established to improve the risk factors in this study. In conclusion, this study reinforces that microbiological analysis is as a valuable tool for checking what points and stages of the cooking process must be controlled.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.5
• /
• pp.969-976
• /
• 2013

The information protection systems of company are intended to detect all weak points, intrusion, document drain. All actions of people in company are recorded and can check persistently. On the other hand, what analyze security log generated by these systems becomes more difficult. Most staff who manages the security systems, and analyze log is more incomprehensible than a user or a person of drain for an information distribution process of the work-site operations and the management procedure of the critical information. Such a reality say the serious nature of the internal information leakage that can be brought up more. While the research on the big data proceeds actively recently, the successful cases are being announced in the various areas. This research is going to present the improved big data processing technology and case of the security field.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.39-47
• /
• 2017

The SAR payload of the KOMPSAT-5 is equipped with an X-band (9.66GHz) microwave-based sensor. Especially, since it has a fixed antenna that can be electronically steered with respect to the azimuth and elevation planes, various applications are expected. This study evaluates the production performance and the accuracy of the DEM by producing DEM using the HR and UH mode images of KOMPSAT-5. To evaluate the production performance of the DEM, the sensitivity of DEM was assessed through a baseline analysis and $2{\pi}$ ambiguity; it was found to have good production performance. In addition, to evaluate the accuracy of the produced DEM, 30 check points were compared with SRTM data. As a result, STDEV ${\pm}15-20m$ accuracy was obtained. If the accuracy of the DEM is improved by adjusting the parameters of the filtering method or phase unwrapping method in the future, it will be possible to widely use the KOMPSAT-5 image for environmental and disaster monitoring.