• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.123-128
• /
• 2016

In manufacturing processing of a secondary battery, the visual inspection system is studied and developed to check the surface defects of the electrode plates. It consists of two parts, one is the hardware control and the other software implementation. The former is made up to the system configuration and the design of the optical system, the illuminations and the controllers. The latter is the detection algorithms of the surface defects. This system achieves the quality improvement of the electrode process and the price competitiveness. By using the proposed defects detection algorithms this system demonstrates the high reliability of spot, line, manhole, extraneous substance, scratch, and crater defect of a electrode plate surface.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.99-104
• /
• 2011

In this paper the approach of neural network was proposed which detects a variety of defects in the molded parts. In an attempt to improve the response of the system, It is designed to minimize the use of memory via LookUp table in software. The goal of these methods was to extract the features of samples in learning of neural networks, overcoming the algorithms of defects detection and classification. Through the learning of 500 sample patterns of molded parts, defects of 3% molded parts was detected and classified as the incorrect diameter parts. We expect that proposed approach is an effective alternative to save test time and cost for defect detection of a fine pattern within the molded parts.

• Journal of Periodontal and Implant Science
• /
• v.40 no.5
• /
• pp.249-253
• /
• 2010

Purpose: The purpose of this study was to evaluate the improvement of periodontal health of generalized aggressive periodontitis (GAgP) diagnosed patients treated with non-surgical periodontal therapy accompanying systemic antibiotics administration. Methods: Two patients with GAgP were chosen for this study. Clinical indices were taken and a radiographic examination was performed at the baseline of the study and they were treated by periodontal therapy accompanying systemic antibiotics administration. Post-surgical visits were scheduled at regular intervals to check clinical and radiographic changes. Results: Through non-surgical periodontal therapy accompanying systemic antibiotics administration, GAgP patients showed decreased probing pocket depth, sulcus bleeding index, and increased attachment level and clinical index when comparing the initial and six month follow up data. In the six month follow-up radiographic examination after non-surgical periodontal therapy, resolution of the bony defect was observed. Conclusions: Non-surgical therapy combined with systemic antibiotics administration in GAgP patients is suggested to be an effective approach to enhance the periodontal health.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.213-222
• /
• 2014

In this paper, we introduce that MAAB style guideline has effects on the codes generated from Simulink models for static and dynamic software testing, when weapon system embedded software design and implementation are performed using the model based method. As showing the effects, MAAB guideline is helpful for defect prevention related with coding rules and run time errors associated with the DAPA weapon system embedded software guide. Thus, we check related items between MAAB and DAPA software reliability testing including static and dynamic analysis. And then we propose the criterion to select proper items from MAAB for DAPA guideline and show how to verify the relationship and the effects on reliability of models in Simulink. In addition, we show the needs for clear logics in conditional block models or statements and simple complexity models for Simulink model based design.

• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.17-22
• /
• 2019

Gentry, an SMT equipment, is a device that absorbs electronic components from the feeder and mounts them correctly on the PCB. At this time, the gantry stops in front of the camera to check whether the parts are correctly adsorbed. In this paper, we propose a method to shorten the moving time by moving the gantry without stopping in front of the camera. This method shows that the moving time is shorter than that of the conventional method by finding a path that can be moved in the fastest time among the various moving paths. The proposed method (moving-motion) reduces the gantry travel time by 20% compared to the conventional method (stop-motion).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.509-515
• /
• 2022

As the 4th industrial revolution based on ICT is progressing in the manufacturing field, interest in building smart factories that can be flexible and customized according to customer demand is increasing. To this end, it is necessary to maximize the efficiency of factory by performing an automated process in real time through a network communication between engineers and equipment to be able to link the established IT system. It is also necessary to collect and store real-time data from heterogeneous facilities and to analyze and visualize a vast amount of data to utilize necessary information. Therefore, in this study, four types of controllers such as PLC, Arduino, Raspberry Pi, and embedded system, which are generally used to build a smart factory that can connect technologies such as artificial intelligence (AI), Internet of Things (IoT), and big data, are configured. This study was conducted for the development of a program that can collect and store data in real time to visualize and manage information. For communication verification by controller, data communication was implemented and verified with the data log in the program, and 3D monitoring was implemented and verified to check the process status such as planned quantity for each controller, actual quantity, production progress, operation rate, and defect rate.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.2
• /
• pp.113-121
• /
• 2023

High-precision lasers and anti-aircraft radars are the main equipment to protect the Korean Peninsula, and require preemptive maintenance before signs of failure. Of the key components in the drive sector, bearings do not have a fault alarm function. Therefore, the technology for diagnosing defects in bearings before the performance degradation of equipment occurs is becoming more important. In this paper, for the experimental analysis, we measured the acceleration of the four sets of the same lot using acceleration sensors. Through periodic measurements, the factors that changed until the bearing stopped rotating were analyzed. To determine the replacement time, the main factors and threshold values of the bearing signal were analyzed. The error of the theoretical and experimental analysis results of the defect frequency was within 2.8 %, and the validity of the theoretical analysis results could be confirmed. Based on the results, it is possible to remotely transmit trouble alerts to users through the system check function.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.41-42
• /
• 2022

The management of defects in barracks facilities is carried out in such a way that defects found by the facility's manager are listed and requested to be repaired by the contractor. However, the standards and methods for the inspection of defects in the management of these defects are not specified in detail, so it is difficult to check the defects in detail. In response, the study first analyzed the current status of the number of defects that occurred in 2021 at official residences and barracks of certain units. As a result of the analysis, the number of defects that were not taken care of and that were not taken until the previous month was more than 10 cases on average per month. In order to reduce the number of such defects, major improvements in the field, timing, and safety inspection were found after the inspection of the military's facilities and safety, and the analysis of the manual of maintenance management. In addition, items for improvement of the checklist were derived through an analysis of the repair of defects caused by the unit's official residence and a total of 10 barracks facilities. Based on this, a checklist was proposed to manage defects in barracks facilities through interviews with military facility managers.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.187-198
• /
• 2002

The ultimate goal of periodontal therapy is the regeneration of periodontal tissue which has been lost due to destructive periodontal disease. To achieve periodontal regeneration, various kinds of methods have been investigated and developed, including guided tissue regeneration and bone graft. Bone graft can be catagorized into autografts, allografts, xenografts, bone substitutes. And materials of all types have different biological activity and the capacity for periodontal regeneration, but ideal graft material has not been developed that fits all the requirement of ideal bone graft material. Recently, bioactive glass that has been utilized in plastic surgery is being investigated for application in dental practice. But, there has not been any long-term assessment of bioactive glass when used in periodontal intrabony defects. The present study evaluates the long-term effects of bioactive glass on the periodontal regeneration in intrabony defects of human and the effect of plaqu control on long term treatment results after dividing patients into those who underwent 3-month regular check-up and those who didn't under go regular check-up The clinical effect on 74sites from 17 infrabony pockets of 11 patients were analyzed 36months after treatment. 51 sites which underwent regular check up were classified as the Follow-up group(F/U group), and 23 sites which did not undergo regular check up were classified as Non Follow-up group(Non F/U group). After comparing the probing depth, attachment loss, bone probing depth before and 36months after treatment, the following results could be concluded. 1. The changes of probing pocket depth showed a statistically significant decrease between after baseline and 36 months after treatment in F/U group(1.79${\pm}$0.68mm) and did no show astatistically significant decrease between after baseline and 36months after treatment in Non F/U group(0.61${\pm}$0.54mm) (P<0.05). 2. The changes of loss of attachment showed a statistically significant decrease between after baseline and 36 months after treatment in F/U group(1.44${\pm}$0.74mm) and did no show astatistically significant decrease between after baseline and 36months after treatment in Non F/U group(1.18${\pm}$1.54) (P<0.05). 3. The changes of bone probing depth showed a statistically significant decrease between after baseline and 36 months after treatment in both F/U(1.35${\pm}$0.28) and Non F/U group(0.78${\pm}$0.55mm) (P<0.05). The results suggest that treatment of infrabony defects with bioactive glass resulted in significan reduction of attachment loss and bone probing depth 36months after the treatment. The use of bioactive glass in infrabony defects, combined with regular check-up and proper plaque control generally shows favorable clinical results. This measn that bioactive glass could be a useful bone substitute.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.3
• /
• pp.57-68
• /
• 1993

The economy of Korea has grown up significantly in its scale. It has, therefore, become imperative to develop countermeasures to prevent work related injuries and occupational illnesses resultining from haza-rdous working conditions and handling harmful substances. A lot of cargo handling accident in port have occurred due to the characteristics of poor working environment, diversity of working place and method, fluctuation of the amount of cargo and handling of heavy, long, harmful and dangerous cargo, etc. According to '91 industrial accident analysis carried out by the ministry of labour, the number of the stevedores injured by cargo handling accident in port were 1, 432 persons (the death accident : 22 per-sons), the amount of industrial accident compensation in port was 6.7 billion won (the amount of economic loss : 33.6 billion won), and the injury occurance rate of the stevedoring industry was higher than that of the whole industry. This paper, therefore, aims to the actual status of the stevedoring industry and to extract the main cau-ses of the accidents related to cargo handling in port through factor analysis using the data of the accide-nts in the whole habour from 1990 to 1992, and to suggest the countermeasures to prevent such accident. The main causes of the accident and countermeasures are found to be as follows through the factor analy-sis : Factor1, factor2, and factor3 related to a defect of human being and management, a defect of state and environment, and an insufficiency of education and law are extracted. The short-term countermeasures to prevent these accidents are 1) to consolidate the safety and health organization in the working spot, 2) to secure a safe condition in working spot before dock work, 3) to strengthen a dock worker's safety educa-tion. The long-term countermeasures are 1) to promote a decasualisation of dock workers, 2) to modernize the cargo working methods through constructing exclusive pier and introducing exclusive cargo handling equipment, 3) to establish a exclusive dock accident prevention organization and the dock workers law. Factor 4, factor5, factor6, and factor7 related to an unfitness, a deficiency of technical knowledge, a nonfu-lfilment of safety measures, and a bad arrangement are extracted. The countermeasures to prevent these accidents are 1) to perform a complete safety inspection of cargo handling equipments and tools and to carry out the dock work according to a working plan, 2) to publish and supply technical safety books, safety instruction book, safety check list, etc., 3) to strengthen the safety patrol at the working spot in habour and to activate a safety fund, 4) to maintain always a clean workshop with the safety consciousness in which the good arragement of the working spot is considered to be the beginning of safety.